Global Market Integration and National Sovereignty

In this paper, we first trace the evolution of the global trading system from the 19th century to the present-day GATT/WTO arrangements, calling attention to the key roles of reciprocity and nondiscrimination, and we note how the system is now challenged by the new paradigm of global market integration. We then consider the recent plethora of free trade agreements (FTAs), including those between industrial and developing countries, and their uneasy relationship with a multilateral system based on non-discrimination.. Thereafter, we seek to identify the boundaries of the WTO and examine how the potential expansion of these boundaries extension and weakening of the effectiveness and influence of the WTO.Reciprocity, Non-Discrimination; Boundaries of WTO Regime

Fairness in the WTO Trading System

We first provide a brief critique of the utilitarian principle as a guide to fairness in the world trading system. We then turn to the alternative conception of fairness in terms of economic equity, exploring the meaning of its two components: equality of opportunity and distributive justice. We thereafter proceed to discuss the conditions of autonomy and reciprocity that have to be met in order to realize greater fairness in multilateral trade negotiations. Next, we comment on aspects of procedural justice that are necessary for the functioning of a fair trading system. Finally, we conclude with an overall assessment of the considerations of the fairness achieved in the Uruguay Round multilateral negotiations.Fairness, Equality of Opportunity, Distributive Justice, Global Trading System

What Are the Issues in Using Trade Agreements for Improving International Labor Standards?

This paper addresses the issues of whether the linking of core labor standards with multilateral or bilateral trade agreements is an effective way of promoting the improvement of labor standards. We review the determinants of core labor standards over time and conclude that efforts to improve these standards have to be tailored to the economic and social circumstances prevailing in a country at a specific time. Legalistic means to prod governments into revising their domestic laws or enforcing them will therefore be unsuccessful unless economic incentives can be changed to erode prevailing social norms and ease the way for the acceptance of new norms that will meet with public approval and be consonant with the distribution of political power. Moral suasion from both domestic and external sources may work more slowly than more legalistic means but is preferred because it contributes to altering the social norms that underlie and will reinforce the acceptance and effectiveness of labor standards.International labor standards, social norms, trade agreements

Single Degree-of-Freedom Modeling of SLS Liquid Hydrogen Pre-Valve Flow Guide to Enable Rapid Transient Analysis

A unique single degree-of-freedom approximation technique has been developed to enable rapid application of a temporally-defined multi-spectral semi-narrow-band loading for generation of realistic stress/cycle values compared to a resonant analysis. The technique uses the harmonic analysis at resonance of a high-fidelity finite element model to produce a transfer function, which is then used to calibrate the response of the SDOF model. A standard numerical ordinary differential equation solver is then used to obtain the temporal response, and its histogram is used in a fatigue/fracture model. This technique is related to other SDOF methods used widely in industry, such as Miles' Equation and the Shock Response Spectra, but it is unique in that it produces a realistic time history of the response. The most obvious error in the process, which is the effect of closely-spaced modes, was also assessed using the parallel application of several SDOF models, and the error is shown to be small. The application of this unique and tractable reduced-order methodology has enabled the SLS program to avoid substantial cost and schedule penalties if a redesign or change of material were required. It has also enabled quick analysis of a number of other structures undergoing the same or similar excitation fields, and quick assessment when the excitation and structural configuration has been altered due to design changes in the system

Characterization of Deficiencies in the Frequency Domain Forced Response Analysis Technique for Supersonic Turbine Bladed Disks

Turbine blades in rocket and jet engine turbomachinery experience enormous harmonic loading conditions. These loads result from the integer number of upstream and downstream stator vanes as well as the other turbine stages. Assessing the blade structural integrity is a complex task requiring an initial characterization of whether resonance is possible and then performing a forced response analysis if that condition is met. The standard technique for forced response analysis in rocket engines is to decompose a CFD-generated flow field into its harmonic components, and to then perform a frequency response analysis at the problematic natural frequencies. Recent CFD analysis and water-flow testing at NASA/MSFC, though, indicates that this technique may miss substantial harmonic and non-harmonic excitation sources that become present in complex flows. A substantial effort has been made to account for this denser spatial Fourier content in frequency response analysis (described in another paper by the author), but the question still remains whether the frequency response analysis itself is capable of capturing the excitation content sufficiently. Two studies comparing frequency response analysis with transient response analysis, therefore, of bladed-disks undergoing this complex flow environment have been performed. The first is of a bladed disk with each blade modeled by simple beam elements. Six loading cases were generated by varying a baseline harmonic excitation in different ways based upon cold-flow testing from Heritage Fuel Air Turbine Test. It was hypothesized that the randomness and other variation from the standard harmonic excitation would reduce the blade structural response, but the results showed little reduction. The second study was of a realistic model of a bladed-disk excited by the same CFD used in the J2X engine program. It was hypothesized that enforcing periodicity in the CFD (inherent in the frequency response technique) would overestimate the response. The results instead showed that the transient analysis results were up to 10% higher for "clean" nodal diameter excitations and six times larger for "messy" excitations, where substantial Fourier content around the main harmonic exists. Because the bulk of resonance problems are due to the "clean" excitations, a 10% underprediction is not necessarily a problem, especially since the average response in the transient is similar to the frequency response result, and so in a realistic finite life calculation, the life would be same. However, in the rare cases when the "messy" excitations harmonics are identified as the source of potential resonance concerns, this research does indicate that frequency response analysis is inadequate for accurate characterization of blade structural capability

Calculating Nozzle Side Loads using Acceleration Measurements of Test-Based Models

As part of a NASA/MSFC research program to evaluate the effect of different nozzle contours on the well-known but poorly characterized "side load" phenomena, we attempt to back out the net force on a sub-scale nozzle during cold-flow testing using acceleration measurements. Because modeling the test facility dynamics is problematic, new techniques for creating a "pseudo-model" of the facility and nozzle directly from modal test results are applied. Extensive verification procedures were undertaken, resulting in a loading scale factor necessary for agreement between test and model based frequency response functions. Side loads are then obtained by applying a wide-band random load onto the system model, obtaining nozzle response PSD's, and iterating both the amplitude and frequency of the input until a good comparison of the response with the measured response PSD for a specific time point is obtained. The final calculated loading can be used to compare different nozzle profiles for assessment during rocket engine nozzle development and as a basis for accurate design of the nozzle and engine structure to withstand these loads. The techniques applied within this procedure have extensive applicability to timely and accurate characterization of all test fixtures used for modal test.A viewgraph presentation on a model-test based pseudo-model used to calculate side loads on rocket engine nozzles is included. The topics include: 1) Side Loads in Rocket Nozzles; 2) Present Side Loads Research at NASA/MSFC; 3) Structural Dynamic Model Generation; 4) Pseudo-Model Generation; 5) Implementation; 6) Calibration of Pseudo-Model Response; 7) Pseudo-Model Response Verification; 8) Inverse Force Determination; 9) Results; and 10) Recent Work

Surgical approaches to adenocarcinoma of the gastroesophageal junction: the Siewert II conundrum.

BACKGROUND: The Siewert classification system for gastroesophageal junction adenocarcinoma has provided morphological and topographical information to help guide surgical decision-making. Evidence has shown that Siewert I and III tumors are distinct entities with differing epidemiologic and histologic characteristics and distinct patterns of disease progression, requiring different treatment. Siewert II tumors share some of the characteristics of type I and III lesions, and the surgical approach is not universally agreed upon. Appropriate surgical options include transthoracic esophagogastrectomy, transhiatal esophagectomy, and transabdominal extended total gastrectomy. PURPOSE: A review of the available evidence of the surgical management of Siewert II tumors is presented. CONCLUSIONS: Careful review of the data appear to support the fact that a satisfactory oncologic resection can be achieved via a transabdominal extended total gastrectomy with a slight advantage in terms of perioperative complications, and overall postoperative quality of life. Overall and disease-free survival compares favorably to the transthoracic approach. These results can be achieved with careful selection of patients balancing more than just the Siewert type in the decision-making but considering also preoperative T and N stages, histological type (diffuse type requiring longer margins that are not always achievable via gastrectomy), and the presence of Barrett\u27s esophagus

Bryophytes and their distribution in the Blue Mountains region of New South Wales

The bryophytes (mosses, liverworts and hornworts) that occur in the Blue Mountains region of New South Wales (latitude 33˚–34˚ S, longitude 151˚–151˚40’ E) are listed and information is provided on their distribution in the region. Species lists are based on herbarium specimens and field collections. 348 bryophyte taxa have been recorded from 70 families, including 225 moss taxa (in 108 genera from 45 families), 120 liverwort taxa (in 51 genera from 24 families) and 3 hornwort taxa (in 3 genera from one family). The moss families with most taxa are the Pottiaceae (with 23 taxa in 13 genera), Bryaceae (with 15 taxa in 3 genera) and Fissidentaceae (with 13 taxa). The largest genera are Fissidens (13 taxa), Campylopus (9) and Macromitrium (8). The liverwort family with the most taxa is Lepidoziaceae, with 29 taxa in 10 genera. The largest liverwort genera are Frullania (11 taxa) and Riccardia (8). The species lists include collections from both bushland and urban areas. Natural features of the Blue Mountains, including topography, altitude, climate and vegetation appear to be important factors influencing the number of bryophyte species recorded from each location. The number of collections from particular locations has been considerably influenced by ease of access, particularly proximity to roads, public transport and railway stations. The species lists include many records from areas that were not accessible to the early collectors of the late 19th and early 20th centuries such as Wollemi National Park, Gardens of Stone National Park, Newnes Plateau and Kanangra-Boyd National Park