Viscous coalescence of droplets: a Lattice Boltzmann study

The coalescence of two resting liquid droplets in a saturated vapor phase is investigated by Lattice Boltzmann simulations in two and three dimensions. We find that, in the viscous regime, the bridge radius obeys a t^{1/2}-scaling law in time with the characteristic time scale given by the viscous time. Our results differ significantly from the predictions of existing analytical theories of viscous coalescence as well as from experimental observations. While the underlying reason for these deviations is presently unknown, a simple scaling argument is given that describes our results well.Comment: 12 pages, 10 figures; as published in Phys. Fluid

Monte Carlo approach of the islanding of polycrystalline thin films

We computed by a Monte Carlo method derived from the Solid on Solid model, the evolution of a polycrystalline thin film deposited on a substrate during thermal treatment. Two types of substrates have been studied: a single crystalline substrate with no defects and a single crystalline substrate with defects. We obtain islands which are either flat (i.e. with a height which does not overcome a given value) or grow in height like narrow towers. A good agreement was found regarding the morphology of numerical nanoislands at equilibrium, deduced from our model, and experimental nanoislands resulting from the fragmentation of YSZ thin films after thermal treatment.Comment: 20 pages, 7 figure

Peeled film GaAs solar cells for space power

Gallium arsenide (GaAs) peeled film solar cells were fabricated, by Organo-Metallic Vapor Phase Epitaxy (OMVPE), incorporating an aluminum arsenide (AlAs) parting layer between the device structure and the GaAs substrate. This layer was selectively removed by etching in dilute hydrofloric (HF) acid to release the epitaxial film. Test devices exhibit high series resistance due to insufficient back contact area. A new design is presented which uses a coverglass superstrate for structural support and incorporates a coplanar back contact design. Devices based on this design should have a specific power approaching 700 W/Kg

Active Sampling-based Binary Verification of Dynamical Systems

Nonlinear, adaptive, or otherwise complex control techniques are increasingly relied upon to ensure the safety of systems operating in uncertain environments. However, the nonlinearity of the resulting closed-loop system complicates verification that the system does in fact satisfy those requirements at all possible operating conditions. While analytical proof-based techniques and finite abstractions can be used to provably verify the closed-loop system's response at different operating conditions, they often produce conservative approximations due to restrictive assumptions and are difficult to construct in many applications. In contrast, popular statistical verification techniques relax the restrictions and instead rely upon simulations to construct statistical or probabilistic guarantees. This work presents a data-driven statistical verification procedure that instead constructs statistical learning models from simulated training data to separate the set of possible perturbations into "safe" and "unsafe" subsets. Binary evaluations of closed-loop system requirement satisfaction at various realizations of the uncertainties are obtained through temporal logic robustness metrics, which are then used to construct predictive models of requirement satisfaction over the full set of possible uncertainties. As the accuracy of these predictive statistical models is inherently coupled to the quality of the training data, an active learning algorithm selects additional sample points in order to maximize the expected change in the data-driven model and thus, indirectly, minimize the prediction error. Various case studies demonstrate the closed-loop verification procedure and highlight improvements in prediction error over both existing analytical and statistical verification techniques.Comment: 23 page

Interface energies of (100)_{YSZ} and (111)_{YSZ} epitaxial islands on (0001)_{alpha-Al_2O_3} substrates from first principles

We present an ab initio study of the interface energies of cubic yttria-stabilized zirconia (YSZ) epitaxial layers on a (0001)_{alpha-Al_2O_3} substrate. The interfaces are modelled using a supercell geometry and the calculations are carried out in the framework of density-functional theory (DFT) and the local-density approximation (LDA) using the projector-augmented-wave (PAW) pseudopotential approach. Our calculations clearly demonstrate that the (111)_{YSZ} || (0001)_{alpha-Al_2O_3} interface energy is lower than that of (100)_{YSZ} || (0001)_{alpha-Al_2O_3}. This result is central to understanding the behaviour of YSZ thin solid film islanding on (0001)_{alpha-Al_2O_3} substrates, either flat or in presence of defects.Comment: 25 pages, 5 figures, 10 tables, submitted to Physical Review

Fluctuating Bond Aggregation: a Model for Chemical Gel Formation

The Diffusion-Limited Cluster-Cluster Aggregation (DLCA) model is modified by including cluster deformations using the {\it bond fluctuation} algorithm. From 3$d$ computer simulations, it is shown that, below a given threshold value $c_g$ of the volumic fraction $c$, the realization of all intra-aggregate bonding possibilities prevents the formation of a gelling network. For $c>c_g$, the sol-gel transition occurs at a time $t_g$ which, in contrast to DLCA, doesnot diverge with the box size. Several results are reported including small angle scattering curves and possible applications are discussed.Comment: RevTex, 9 pages + 3 postscript figures appended using "uufiles". To appear in Phys. Rev. Let

What do cyclists need to see to avoid single-bicycle crashes?

The number of single-bicycle crash victims is substantial in countries with high levels of cycling. To study the role of visual characteristics of the infrastructure, such as pavement markings, in single-bicycle crashes, a study in two steps was conducted. In Study 1, a questionnaire study was conducted among bicycle crash victims (n = 734). Logistic regression was used to study the relationship between the crashes and age, light condition, alcohol use, gaze direction and familiarity with the crash scene. In Study 2, the image degrading and edge detection method (IDED-method) was used to investigate the visual characteristics of 21 of the crash scenes. The results of the studies indicate that crashes, in which the cyclist collided with a bollard or road narrowing or rode off the road, were related to the visual characteristics of bicycle facilities. Edge markings, especially in curves of bicycle tracks, and improved conspicuity of bollards are recommended. Statement of Relevance: Elevated single-bicycle crash numbers are common in countries with high levels of cycling. No research has been conducted on what cyclists need to see to avoid this type of crash. The IDED-method to investigate crash scenes is new and proves to be a powerful tool to quantify 'visual accessibility'. © 2011 Taylor & Francis

Report on Gun Conditioning Activities at PITZ in 2013

Recently three RF guns were prepared at the Photo Injector Test Facility at DESY, location Zeuthen PITZ for their subsequent operation at FLASH and the European XFEL. The gun 3.1 is a previous cavity design and is currently installed and operated at FLASH, the other two guns 4.3 and 4.4 were of the current cavity design and are dedicated to serve for the start up of the European XFEL photo injector. All three cavities had been dry ice cleaned prior their conditioning and hence showed low dark current levels. The lowest dark current level as low as 60 amp; 956;A at 65MV m field amplitude has been observed for the gun 3.1. This paper reports in details about the conditioning process of the most recent gun 4.4. It informs about experience gained at PITZ during establishing of the RF conditioning procedure and provides a comparison with the other gun cavities in terms of the dark currents. It also summarizes the major setup upgrades, which have affected the conditioning processes of the cavitie

Hard Two-Photon Contribution to Elastic Lepton-Proton Scattering: Determined by the OLYMPUS Experiment

The OLYMPUS collaboration reports on a precision measurement of the positron-proton to electron-proton elastic cross section ratio, $R_{2\gamma}$, a direct measure of the contribution of hard two-photon exchange to the elastic cross section. In the OLYMPUS measurement, 2.01~GeV electron and positron beams were directed through a hydrogen gas target internal to the DORIS storage ring at DESY. A toroidal magnetic spectrometer instrumented with drift chambers and time-of-flight scintillators detected elastically scattered leptons in coincidence with recoiling protons over a scattering angle range of $\approx 20\degree$ to $80\degree$. The relative luminosity between the two beam species was monitored using tracking telescopes of interleaved GEM and MWPC detectors at $12\degree$, as well as symmetric M{\o}ller/Bhabha calorimeters at $1.29\degree$. A total integrated luminosity of 4.5~fb$^{-1}$ was collected. In the extraction of $R_{2\gamma}$, radiative effects were taken into account using a Monte Carlo generator to simulate the convolutions of internal bremsstrahlung with experiment-specific conditions such as detector acceptance and reconstruction efficiency. The resulting values of $R_{2\gamma}$, presented here for a wide range of virtual photon polarization $0.456<\epsilon<0.978$, are smaller than some hadronic two-photon exchange calculations predict, but are in reasonable agreement with a subtracted dispersion model and a phenomenological fit to the form factor data.Comment: 5 pages, 3 figures, 2 table

Influence of the initial chemical conditions on the rational design of silica particles

The influence of the water content in the initial composition on the size of silica particles produced using the Stöber process is well known. We have shown that there are three morphological regimes defined by compositional boundaries. At low water levels (below stoichiometric ratio of water:tetraethoxysilane), very high surface area and aggregated structures are formed; at high water content (>40 wt%) similar structures are also seen. Between these two boundary conditions, discrete particles are formed whose size are dictated by the water content. Within the compositional regime that enables the classical Stöber silica, the structural evolution shows a more rapid attainment of final particle size than the rate of formation of silica supporting the monomer addition hypothesis. The clearer understanding of the role of the initial composition on the output of this synthesis method will be of considerable use for the establishment of reliable reproducible silica production for future industrial adoption