4,436 research outputs found
Recommended from our members
Special issue of the International Journal of Pressure Vessels and Piping on residual stresses at repair welds
Recommended from our members
Asymmetric Cuts In The Contour Method For Residual Stress Measurement
The standard contour method is limited to sectioning test components into two symmetric halves. In this study a new approach is developed to deal with asymmetric cuts in the contour method of residual stress measurement. The proposed approach is demonstrated using finite element (FE) simulations and is validated experimentally using a series of asymmetric contour cuts and neutron diffraction measurements
Recommended from our members
In-situ Neutron Diffraction Studies of Various Metals on Engin-X at ISIS
Combination of Micronutrients for Bone (COMB) Study: Bone Density after Micronutrient Intervention
Along with other investigations, patients presenting to an environmental health clinic with various chronic conditions were assessed for bone health status. Individuals with compromised bone strength were educated about skeletal health issues and provided with therapeutic options for potential amelioration of their bone health. Patients who declined pharmacotherapy or who previously experienced failure of drug treatment were offered other options including supplemental micronutrients identified in the medical literature as sometimes having a positive impact on bone mineral density (BMD). After 12 months of consecutive supplemental micronutrient therapy with a combination that included vitamin D3, vitamin K2, strontium, magnesium and docosahexaenoic acid (DHA), repeat bone densitometry was performed. The results were analyzed in a group of compliant patients and demonstrate improved BMD in patients classified with normal, osteopenic and osteoporotic bone density. According to the results, this combined micronutrient supplementation regimen appears to be at least as effective as bisphosphonates or strontium ranelate in raising BMD levels in hip, spine, and femoral neck sites. No fractures occurred in the group taking the micronutrient protocol. This micronutrient regimen also appears to show efficacy in individuals where bisphosphonate therapy was previously unsuccessful in maintaining or raising BMD. Prospective clinical trials are required to confirm efficacy
From time series to superstatistics
Complex nonequilibrium systems are often effectively described by a
`statistics of a statistics', in short, a `superstatistics'. We describe how to
proceed from a given experimental time series to a superstatistical
description. We argue that many experimental data fall into three different
universality classes: chi^2-superstatistics (Tsallis statistics), inverse
chi^2-superstatistics, and log-normal superstatistics. We discuss how to
extract the two relevant well separated superstatistical time scales tau and T,
the probability density of the superstatistical parameter beta, and the
correlation function for beta from the experimental data. We illustrate our
approach by applying it to velocity time series measured in turbulent
Taylor-Couette flow, which is well described by log-normal superstatistics and
exhibits clear time scale separation.Comment: 7 pages, 9 figure
Recommended from our members
Study of creep cavitation in a stainless steel weldment
A study of creep cavities near reheat cracking in AISI Type 316H austenitic stainless steel headers, removed from long-time high temperature operation in nuclear power plants, is reported. It is shown how application of scanning electron microscopy (SEM), cryogenic fractography and small angle neutron scattering (SANS) can be applied, in a complementary way, to observe and quantify creep cavitation damage. Creep cavities in the vicinity of the crack are found to be mainly surrounding inter-granular carbides. Trends in the size and area fraction of creep cavities relative to the crack path are quantified based on an optimised metallographic and image analysis procedure. Brittle fracture, with clear facets, of material remote from crack is achieved using a cryogenic procedure, and is compared with fractured facets of material within 8 mm of the crack which show evidence of large numbers of cavities. The SANS technique is found to be a very suitable method of quantifying creep cavitation averaged over a larger gauge volume. The distribution of cavities within the size range of 100 to 400 nm is quantified using SANS from positions normal to the crack line. It is shown that the cavity size distribution peaks at about 200 nm and this correlates closely with the quantitative SEM observations
Temperature dependence of the nitrogen-vacancy magnetic resonance in diamond
The temperature dependence of the magnetic resonance spectra of
nitrogen-vacancy (NV-) ensembles in the range of 280-330 K was studied. Four
samples prepared under different conditions were studied with NV-
concentrations ranging from 10 ppb to 15 ppm. For all of these samples, the
axial zero-field splitting (ZFS) parameter, D, was found to vary significantly
with temperature, T, as dD/dT = -74.2(7) kHz/K. The transverse ZFS parameter,
E, was non-zero (between 4 and 11 MHz) in all samples, and exhibited a
temperature dependence of dE/(EdT) = -1.4(3) x 10^(-4) K^(-1). The results
might be accounted for by considering local thermal expansion. The observation
of the temperature dependence of the ZFS parameters presents a significant
challenge for room-temperature diamond magnetometers and may ultimately limit
their bandwidth and sensitivity.Comment: 5 pages, 2 figures, 1 tabl
Bidding process in online auctions and winning strategy:rate equation approach
Online auctions have expanded rapidly over the last decade and have become a
fascinating new type of business or commercial transaction in this digital era.
Here we introduce a master equation for the bidding process that takes place in
online auctions. We find that the number of distinct bidders who bid times,
called the -frequent bidder, up to the -th bidding progresses as
. The successfully transmitted bidding rate by the
-frequent bidder is obtained as , independent of
for large . This theoretical prediction is in agreement with empirical data.
These results imply that bidding at the last moment is a rational and effective
strategy to win in an eBay auction.Comment: 4 pages, 6 figure
Superstatistical fluctuations in time series: Applications to share-price dynamics and turbulence
We report a general technique to study a given experimental time series with
superstatistics. Crucial for the applicability of the superstatistics concept
is the existence of a parameter that fluctuates on a large time scale
as compared to the other time scales of the complex system under consideration.
The proposed method extracts the main superstatistical parameters out of a
given data set and examines the validity of the superstatistical model
assumptions. We test the method thoroughly with surrogate data sets. Then the
applicability of the superstatistical approach is illustrated using real
experimental data. We study two examples, velocity time series measured in
turbulent Taylor-Couette flows and time series of log returns of the closing
prices of some stock market indices
Open Gromov-Witten Invariants of Toric Calabi-Yau 3-Folds
We present a proof of the mirror conjecture of Aganagic-Vafa
[arXiv:hep-th/0012041] and Aganagic-Klemm-Vafa [arXiv:hep-th/0105045] on disk
enumeration in toric Calabi-Yau 3-folds for all smooth semi-projective toric
Calabi-Yau 3-folds. We consider both inner and outer branes, at arbitrary
framing. In particular, we recover previous results on the conjecture for (i)
an inner brane at zero framing in the total space of the canonical line bundle
of the projective plane (Graber-Zaslow [arXiv:hep-th/0109075]), (ii) an outer
brane at arbitrary framing in the resolved conifold (Zhou [arXiv:1001.0447]),
and (iii) an outer brane at zero framing in the total space of the canonical
line bundle of the projective plane (Brini [arXiv:1102.0281, Section 5.3]).Comment: 39 pages, 11 figure
- …