244 research outputs found
Experimental demonstration of evanescent coupling from optical fibre tapers to photonic crystal waveguides
Experimental results demonstrating nearly complete mode-selective evanescent coupling to a photonic crystal waveguide from an optical fibre taper are presented. Codirectional coupling with 98% maximum power transfer to a photonic crystal waveguide of length 65 μm and with a coupling bandwidth of 20 nm is realised
Surface Encapsulation for Low-Loss Silicon Photonics
Encapsulation layers are explored for passivating the surfaces of silicon to
reduce optical absorption in the 1500-nm wavelength band. Surface-sensitive
test structures consisting of microdisk resonators are fabricated for this
purpose. Based on previous work in silicon photovoltaics, coatings of SiNx and
SiO2 are applied under varying deposition and annealing conditions. A short dry
thermal oxidation followed by a long high-temperature N2 anneal is found to be
most effective at long-term encapsulation and reduction of interface
absorption. Minimization of the optical loss is attributed to simultaneous
reduction in sub-bandgap silicon surface states and hydrogen in the capping
material.Comment: 4 pages, 3 figure
An optical fiber-taper probe for wafer-scale microphotonic device characterization
A small depression is created in a straight optical fiber taper to form a
local probe suitable for studying closely spaced, planar microphotonic devices.
The tension of the "dimpled" taper controls the probe-sample interaction length
and the level of noise present during coupling measurements. Practical
demonstrations with high-Q silicon microcavities include testing a dense array
of undercut microdisks (maximum Q = 3.3x10^6) and a planar microring (Q =
4.8x10^6).Comment: 8 pages, 5 figures, for high-res version see
http://copilot.caltech.edu/publications/index.ht
Numerical and experimental efficiency estimation in household battery energy storage equipment
Battery energy storage systems (BESS) are spreading in several applications among transmission and distribution networks. Nevertheless, it is not straightforward to estimate their performances in real life working conditions. This work is aimed at identifying test power profiles for stationary residential storage applications capable of estimating BESS performance. The proposed approach is based on a clustering procedure devoted to group daily power profiles according to their battery efficiency. By performing a k-means clustering on a large dataset of load and generation profiles, four standard charge/discharge profiles have been identified to test BESS' performances. Different clustering approaches have been considered, each of them splitting the dataset according to different properties of the profiles. A well-performing clustering approach resulted, based on the adoption of reference parameters for the clustering process of the maximum power exchanged by the BESS and the variation of battery energy content. Firstly, the results have been proven through a numerical procedure based on a BESS electrical model and on the definition of a key performance index. Then, an experimental validation has been carried out on a precommercial sodium-nickel chloride BESS: this device is available in the IoT lab of Politecnico di Milano within the H2020 InteGRIDy project
Actuation of Micro-Optomechanical Systems Via Cavity-Enhanced Optical Dipole Forces
We demonstrate a new type of optomechanical system employing a movable,
micron-scale waveguide evanescently-coupled to a high-Q optical microresonator.
Micron-scale displacements of the waveguide are observed for
milliwatt(mW)-level optical input powers. Measurement of the spatial variation
of the force on the waveguide indicates that it arises from a cavity-enhanced
optical dipole force due to the stored optical field of the resonator. This
force is used to realize an all-optical tunable filter operating with sub-mW
control power. A theoretical model of the system shows the maximum achievable
force to be independent of the intrinsic Q of the optical resonator and to
scale inversely with the cavity mode volume, suggesting that such forces may
become even more effective as devices approach the nanoscale.Comment: 4 pages, 5 figures. High resolution version available at
(http://copilot.caltech.edu/publications/CEODF_hires.pdf). For associated
movie, see (http://copilot.caltech.edu/research/optical_forces/index.htm
Feasibility of detecting single atoms using photonic bandgap cavities
We propose an atom-cavity chip that combines laser cooling and trapping of
neutral atoms with magnetic microtraps and waveguides to deliver a cold atom to
the mode of a fiber taper coupled photonic bandgap (PBG) cavity. The
feasibility of this device for detecting single atoms is analyzed using both a
semi-classical treatment and an unconditional master equation approach.
Single-atom detection seems achievable in an initial experiment involving the
non-deterministic delivery of weakly trapped atoms into the mode of the PBG
cavity.Comment: 11 pages, 5 figure
Probing the dispersive and spatial properties of photonic crystal waveguides via highly efficient coupling from fiber tapers
The demonstration of an optical fiber based probe for efficiently exciting the waveguide modes of high-index contrast planar photonic crystal (PC) slabs is presented. Fiber taper waveguides formed from standard silica single-mode optical fibers are used to evanescently couple light into the guided modes of a patterned silicon membrane. A coupling efficiency of ~95% is obtained between the fiber taper and a PC waveguide mode suitably designed for integration with a previously studied ultrasmall mode volume high-Q PC resonant cavity [Srinivasan et al., Appl. Phys. Lett. 83, 1915 (2003)]. The micron-scale lateral extent and dispersion of the fiber taper is used as a near-field spatial and spectral probe to study the profile and dispersion of PC waveguide modes
- …