Hafnium metallocene compounds used as cathode interfacial layers for enhanced electron transfer in organic solar cells

We have used hafnium metallocene compounds as cathode interfacial layers for organic solar cells [OSCs]. A metallocene compound consists of a transition metal and two cyclopentadienyl ligands coordinated in a sandwich structure. For the fabrication of the OSCs, poly[3,4-ethylenedioxythiophene]:poly(styrene sulfonate), poly(3-hexylthiophene-2,5-diyl) + [6,6]-phenyl C61 butyric acid methyl ester, bis-(ethylcyclopentadienyl)hafnium(IV) dichloride, and aluminum were deposited as a hole transport layer, an active layer, a cathode interfacial layer, and a cathode, respectively. The hafnium metallocene compound cathode interfacial layer improved the performance of OSCs compared to that of OSCs without the interfacial layer. The current density-voltage characteristics of OSCs with an interfacial layer thickness of 0.7 nm and of those without an interfacial layer showed power conversion efficiency [PCE] values of 2.96% and 2.34%, respectively, under an illumination condition of 100 mW/cm2 (AM 1.5). It is thought that a cathode interfacial layer of an appropriate thickness enhances the electron transfer between the active layer and the cathode, and thus increases the PCE of the OSCs

Physical properties of metal-doped zinc oxide films for surface acoustic wave application

Metal-doped ZnO [MZO] thin films show changes of the following properties by a dopant. First, group III element (Al, In, Ga)-doped ZnO thin films have a high conductivity having an n-type semiconductor characteristic. Second, group I element (Li, Na, K)-doped ZnO thin films have high resistivity due to a dopant that accepts a carrier. The metal-doped ZnO (M = Li, Ag) films were prepared by radio frequency magnetron sputtering on glass substrates with the MZO targets. We investigated on the optical and electrical properties of the as-sputtered MZO films as dependences on the doping contents in the targets. All the MZO films had shown a preferred orientation in the [002] direction. As the quantity and the variety of metal dopants were changed, the crystallinity and the transmittance, as well as optical band gap were changed. The electrical resistivity was also changed with changing metal doping amounts and kinds of dopants. An epitaxial Li-doped ZnO film has a high resistivity and very smooth surface; it will have the most optimum conditions which can be used for the piezoelectric devices

Growth behavior of titanium dioxide thin films at different precursor temperatures

The hydrophilic TiO2 films were successfully deposited on slide glass substrates using titanium tetraisopropoxide as a single precursor without carriers or bubbling gases by a metal-organic chemical vapor deposition method. The TiO2 films were employed by scanning electron microscopy, Fourier transform infrared spectrometry, UV-Visible [UV-Vis] spectroscopy, X-ray diffraction, contact angle measurement, and atomic force microscopy. The temperature of the substrate was 500°C, and the temperatures of the precursor were kept at 75°C (sample A) and 60°C (sample B) during the TiO2 film growth. The TiO2 films were characterized by contact angle measurement and UV-Vis spectroscopy. Sample B has a very low contact angle of almost zero due to a superhydrophilic TiO2 surface, and transmittance is 76.85% at the range of 400 to 700 nm, so this condition is very optimal for hydrophilic TiO2 film deposition. However, when the temperature of the precursor is lower than 50°C or higher than 75°C, TiO2 could not be deposited on the substrate and a cloudy TiO2 film was formed due to the increase of surface roughness, respectively

A study on the characteristics of plasma polymer thin film with controlled nitrogen flow rate

Nitrogen-doped thiophene plasma polymer [N-ThioPP] thin films were deposited by radio frequency (13.56 MHz) plasma-enhanced chemical vapor deposition method. Thiophene was used as organic precursor (carbon source) with hydrogen gas as the precursor bubbler gas. Additionally, nitrogen gas [N2] was used as nitrogen dopant. Furthermore, additional argon was used as a carrier gas. The as-grown polymerized thin films were analyzed using ellipsometry, Fourier-transform infrared [FT-IR] spectroscopy, Raman spectroscopy, and water contact angle measurement. The ellipsometry results showed the refractive index change of the N-ThioPP film. The FT-IR spectra showed that the N-ThioPP films were completely fragmented and polymerized from thiophene

CD82/KAI1 Maintains the Dormancy of Long-Term Hematopoietic Stem Cells through Interaction with DARC- Expressing Macrophages

Hematopoiesis is regulated by crosstalk between long-term repopulating hematopoietic stem cells (LT-HSCs) and supporting niche cells in the bone marrow (BM). Here, we examine the role of CD82/ KAI1 in niche-mediated LT-HSC maintenance. We found that CD82/ KAI1 is expressed predominantly on LT-HSCs and rarely on other hematopoietic stem-progenitor cells (HSPCs). In Cd82 +/-/+/- mice, LTHSCs were selectively lost as they exited from quiescence and differentiated. Mechanistically, CD82based TGF-b1/ Smad3 signaling leads to induction of CDK inhibitors and cell-cycle inhibition. The CD82 binding partner DARC/ CD234 is expressed on macrophages and stabilizes CD82 on LT-HSCs, promoting their quiescence. When DARC + BMmacrophages were ablated, the level of surface CD82 on LT-HSCs decreased, leading to cell-cycle entry, proliferation, and differentiation. A similar interaction appears to be relevant for human HSPCs. Thus, CD82 is a functional surface marker of LT-HSCs that maintains quiescence through interaction with DARC-expressing macrophages in the BM stem cell niche.113525Ysciescopu

Ninjurin1 drives lung tumor formation and progression by potentiating Wnt/β-Catenin signaling through Frizzled2-LRP6 assembly

Cancer stem-like cells (CSCs) play a pivotal role in lung tumor formation and progression. Nerve injury-induced protein 1 (Ninjurin1, Ninj1) has been implicated in lung cancer; however, the pathological role of Ninj1 in the context of lung tumorigenesis remains largely unknown. The role of Ninj1 in the survival of non-small cell lung cancer (NSCLC) CSCs within microenvironments exhibiting hazardous conditions was assessed by utilizing patient tissues and transgenic mouse models where Ninj1 repression and oncogenic KrasG12D/+ or carcinogen-induced genetic changes were induced in putative pulmonary stem cells (SCs). Additionally, NSCLC cell lines and primary cultures of patient-derived tumors, particularly Ninj1high and Ninj1low subpopulations and those with gain- or loss-of-Ninj1 expression, and also publicly available data were all used to assess the role of Ninj1 in lung tumorigenesis. Ninj1 expression is elevated in various human NSCLC cell lines and tumors, and elevated expression of this protein can serve as a biomarker for poor prognosis in patients with NSCLC. Elevated Ninj1 expression in pulmonary SCs with oncogenic changes promotes lung tumor growth in mice. Ninj1high subpopulations within NSCLC cell lines, patient-derived tumors, and NSCLC cells with gain-of-Ninj1 expression exhibited CSC-associated phenotypes and significantly enhanced survival capacities in vitro and in vivo in the presence of various cell death inducers. Mechanistically, Ninj1 forms an assembly with lipoprotein receptor-related protein 6(LRP6) through its extracellular N-terminal domain and recruits Frizzled2 (FZD2) and various downstream signaling mediators, ultimately resulting in transcriptional upregulation of target genes of the LRP6/β-catenin signaling pathway. Ninj1 may act as a driver of lung tumor formation and progression by protecting NSCLC CSCs from hostile microenvironments through ligand-independent activation of LRP6/β-catenin signaling.This study was supported by the grants from the National Research Founda‑tion of Korea (NRF), the Ministry of Science and ICT (MSIT), Republic of Korea (No. NRF-2016R1A3B1908631)

Fabrication of moth-eye patterned TiO2 active layers for high energy efficiency and current density of dye-sensitized solar cells

Past two decades have shown the unprecedentedly rapid emergence of dye-sensitized solar cells (DSSCs) that are efficient, inexpensive, and eco-friendly. However, structural studies of the internal solar cells have not made much progress because of the high cost and complexity of the fabrication. In this study, therefore, we designed and fabricated a moth-eye patterned TiO2 layer as a working electrode using a soft lithography method with polystyrene (PS) monolayer, and the moth-eye patterned TiO2 active layers were constructed using a polydimethylsiloxane (PDMS) stamp via inverse honeycomb patterning having various PS beads of 400, 800, 1200 and 1600 nm. For the 1600 nm patterned stamp, Jsc is higher for moth-eye patterned TiO2 (13.63 mA/cm2) than that for flat TiO2 (11.09 mA/cm2), which results in a higher power efficiency of 7.66% rather than 6.40%. This result found an increment of around 23% in current density and 20% in energy conversion efficiency, mainly because of greater light-harvesting effect by its structural anti-reflective property

A STUDY OF THE CHARACTERISTICS OF ORGANIC–INORGANIC HYBRID PLASMA-POLYMER THIN FILMS BY CO-DEPOSITION OF TOLUENE AND TEOS

We investigated the interaction of varied plasma power with ultralow-κ Toluene–TEOS hybrid plasma-polymer thin films, as well as changes in electrical and mechanical properties with various mixture ratios of toluene and TEOS (tetraethoxysilane). Using the plasma enhanced chemical vapor deposition (PECVD) method, organic–inorganic hybrid polymer thin films were deposited on silicon(100) substrates under 150°C of wall temperature and a ratio of TEOS to toluene. Toluene and TEOS were utilized as organic and inorganic precursors, and hydrogen and argon were used as bubbler and carrier gases, respectively. In order to compare the differences in the electrical and the mechanical properties of plasma polymerized thin films, we grew the hybrid polymer thin films under 30 W of RF (radio frequency using 13.56 MHz) power with various ratios of toluene to TEOS. The as-grown polymerized thin films were first analyzed by Fourier Transform Infrared (FT-IR) spectroscopy, and Atomic Force Microscopy (AFM). The results of FT-IR showed that the hybrid polymer thin films were totally fragmented and polymerized with increasing RF power. AFM showed that polymer films with smooth surface could be grown under various deposition conditions. An impedance analyzer was utilized for the measurements of capacitance values for dielectric constants and the thin films were analyzed for hardness and Young's modulus using a nanoindenter.Low-κ, PECVD, mechanical and electronic properties

Phase-Controlled Multi-Dimensional-Structure SnS/SnS₂/CdS Nanocomposite for Development of Solar-Driven Hydrogen Evolution Photocatalyst

The quest for water-splitting photocatalysts to generate hydrogen as a clean energy source from two-dimensional (2D) materials has enormous implications for sustainable energy solutions. Photocatalytic water splitting, a major field of interest, is focused on the efficient production of hydrogen from renewable resources such as water using 2D materials. Tin sulfide and tin disulfide, collectively known as SnS and SnS2, respectively, are metal sulfide compounds that have gained attention for their photocatalytic properties. Their unique electronic structures and morphological characteristics make them promising candidates for harnessing solar energy for environmental and energy-related purposes. CdS/SnS/SnS2 photocatalysts with two Sn phases (II and IV) were synthesized using a solvothermal method in this study. CdS was successfully placed on a broad SnS/SnS2 plane after a series of characterizations. We found that it is composited in the same way as a core-shell shape. When the SnS/SnS2 phase ratio was dominated by SnS and the structure was composited with CdS, the degradation efficiency was optimal. This material demonstrated high photocatalytic hydrogenation efficiency as well as efficient photocatalytic removal of Cr(VI) over 120 min. Because of the broad light absorption of CdS, the specific surface area, which is the reaction site, became very large. Second, it served as a transport medium for electron transfer from the conduction band (CB) of the SnS to the CB of the SnS2. Because of the composite, these electrons flowed into the CB of CdS, improving the separation efficiency of the photogenerated carriers even further. This material, which was easily composited, also effectively prevented mineral corrosion, which is a major issue with CdS

Enhancement of Photocatalytic Activities with Nanosized Polystyrene Spheres Patterned Titanium Dioxide Films for Water Purification

For environmental applications, such as water and air purification utilizing photocatalysts, we synthesized patterned titanium dioxide (TiO2) thin films using polystyrene (PS) spheres. This was primarily done to enhance the surface area and photocatalytic activities. TiO2 thin films were deposited on silicon wafers attached to variously sized PS spheres via the spin coating method and were annealed at 600 °C. The processing step involved patterning and coating a TiO2 sol–gel. The photocatalytic performance was analyzed using an UV–visible spectrophotometer. Within 20 min, a high catalytic efficiency (98% removal) with a 20-time faster decomposition rate of the malachite green (MG) solution than that of the nonpatterned TiO2 was obtained from the patterned TiO2 with 400 nm sized PS due to the large surface area. In addition, the phenol in the water removed as much as 50% within 2 h with the same photocatalyst, which was expected to be one of the strong candidates to be applied to the next generation of photocatalysts for water purification