Steady-state Optimality Analysis for Investigating the Energy Optimal Operation of Representative Natural Gas Liquefaction Cycles

AbstractThis study examined the energy optimal operation of representative natural gas liquefaction cycle processes such as propane precooled mixed refrigerant (C3MR) process, dual mixed refrigerant (DMR) process, and modified single mixed refrigerant (MSMR) process. Steady-state optimality analysis in dynamic simulation environment was conducted to explore the operational behavior of each cycle. From this analysis, a steady-state optimality map that describes the relation between cost function and decision variable is obtained. By exploring this map a promising optimizing variable is discovered which further can be used to develop an energy optimizing control structure for the liquefaction process. Despite the same basic working principles, the operational behavior of the three cycles is dissimilar. The DMR has the narrowest optimal operation range while in the MSMR cycle the optimum value of cost function spans in relatively wide range of decision variable. The feasible operation of C3MR and DMR is bounded by the suction temperature of mixed refrigerant compressor while in the MSMR cycle this constraint is inactive. Based on the steady-state optimality analysis the temperature difference between the warm-end inlet and outlet MR streams (TD) were proposed to be a promising optimizing variable for the C3MR and DMR process while for the MSMR process the optimizing variable is the flow rate ratio of heavy and light mixed refrigerant (HK/LK ratio)