EFFECTS OF TEMPERING AND PWHT ON MICROSTRUCTURES AND MECHANICAL PROPERTIES OF SA508 GR.4N STEEL

Presented in this study are the variations of microstructures and mechanical properties with tempering and Post-Weld Heat Treatment (PWHT) conditions for SA508 Gr.4N steel used as Reactor Pressure Vessel (RPV) material. The blocks of model alloy were austenitized at the conventional temperature of 880 °C, then tempered and post-weld heat treated at four different conditions. The hardness and yield strength decrease with increased tempering and PWHT temperatures, but impact toughness is significantly improved, especially in the specimens tempered at 630 °C. The sample tempered at 630 °C with PWHT at 610 °C shows optimum mechanical properties in hardness, strength, and toughness, excluding only the transition property in the low temperature region. The microstructural observation and quantitative analysis of carbide size distribution show that the variations of mechanical properties are caused by the under-tempering and carbide coarsening which occurred during the heat treatment process. The introduction of PWHT results in the deterioration of the ductile-brittle transition property by an increase of coarse carbides controlling cleavage initiation, especially in the tempered state at 630 °C

Complete Binocular Blindness as the First Manifestation of HIV-Related Cryptococcal Meningitis

Ocular complications of HIV-related cryptococcal meningitis are reasonably common, but complete binocular blindness as the first manifestation of HIV is extremely rare. A 58-year-old man presented with binocular blindness. He experienced blurred vision for 3 days before the blindness. Mild pleocytosis was present in the cerebrospinal fluid, from which Cryptococcus neoformans was cultured. Serology revealed positivity for HIV antibody. He was treated with antifungal and antiretroviral therapy. This case indicates that HIV-related cryptococcal meningitis should be taken into consideration when determining the cause of unexpected sudden binocular blindness

The seeded growth of graphene

In this paper, we demonstrate the seeded growth of graphene under a plasma chemical vapor deposition condition. First, we fabricate graphene nanopowders (~5 nm) by ball-milling commercial multi-wall carbon nanotubes. The graphene nanoparticles were subsequently subject to a direct current plasma generated in a 100 Torr 10%CH(4) - 90%H(2) gas mixture. The plasma growth enlarged, over one hour, the nuclei to graphene sheets larger than one hundred nm(2) in area. Characterization by electron and X-ray diffraction, high-resolution transmission electron microscopy images provide evidence for the presence of monolayer graphene sheets

Hydrothermal Synthesis of Sb 2

Crystalline antimony sulfide (Sb2S3) with nanorods morphology was successfully prepared via hydrothermal method by the reaction of elemental sulfur, antimony, and iodine as starting materials with high yield at 180∘C for 24 h. Using oxidation reagent like iodine as an initiator of redox reaction to prepare Sb2S3 is reported for first time. The powder X-ray diffraction pattern shows the Sb2S3 crystals belong to the orthorhombic phase with calculated lattice parameters, a=1.120 nm, b=1.128 nm, and c=0.383 nm. The quantification of energy-dispersive X-ray spectrometry analysis peaks gives an atomic ratio of 2 : 3 for Sb : S. TEM and SEM studies reveal the appearance of the as-prepared Sb2S3 is rodlike which is composed of nanorods with the typical width of 50–140 nm and length of up to 4 μm. The PL emission indicates that band gap of Sb2S3 is around 2.50 ev, indicating a considerable blue shift relative to the bulk. A formation mechanism of Sb2S3 nanostructure is proposed

Patterned Si thin film electrodes for enhancing structural stability

A patterned film (electrode) with lozenge-shaped Si tiles could be successfully fabricated by masking with an expanded metal foil during film deposition. Its electrochemical properties and structural stability during the charge-discharge process were examined and compared with those of a continuous (conventional) film electrode. The patterned electrode exhibited a remarkably improved cycleability (75% capacity retention after 120 cycles) and an enhanced structural stability compared to the continuous electrode. The good electrochemical performance of the patterned electrode was attributed to the space between Si tiles that acted as a buffer against the volume change of the Si electrode

Mycobacterium abscessus activates the NLRP3 inflammasome via Dectin-1–Syk and p62/SQSTM1

Numerous atypical mycobacteria, including Mycobacterium abscessus (Mabc), cause nontuberculous mycobacterial infections, which present a serious public health threat. Inflammasome activation is involved in host defense and the pathogenesis of autoimmune diseases. However, inflammasome activation has not been widely characterized in human macrophages infected with atypical mycobacteria. Here, we demonstrate that Mabc robustly activates the nucleotide binding and oligomerization domain-like receptor family pyrin domain containing 3 (NLRP3) inflammasome via dectin-1/Syk-dependent signaling and the cytoplasmic scaffold protein p62/SQSTM1 (p62) in human macrophages. Both dectin-1 and Toll-like receptor 2 (TLR2) were required for Mabc-induced mRNA expression of pro-interleukin (IL)-1β, cathelicidin human cationic antimicrobial protein-18/LL-37 and β-defensin 4 (DEFB4). Dectin-1-dependent Syk signaling, but not that of MyD88, led to the activation of caspase-1 and secretion of IL-1β through the activation of an NLRP3/apoptosis-associated speck-like protein containing a caspase recruitment domain (ASC) inflammasome. Additionally, potassium efflux was required for Mabc-induced NLRP3/ASC inflammasome activation. Furthermore, Mabc-induced p62 expression was critically involved in NLRP3 inflammasome activation in human macrophages. Finally, NLRP3/ASC was critical for the inflammasome in antimicrobial responses to Mabc infection. Taken together, these data demonstrate the induction mechanism of the NLRP3/ASC inflammasome and its role in innate immunity to Mabc infection

Radiological Assessment of the Effect of Congenital C3-4 Synostosis on Adjacent Segments

Study DesignRetrospective case series.PurposeTo assess the effect of non-kyphotic aligned congenital C3-4 synostosis on the adjacent segment in 10 patients.Overview of LiteratureIn the cervical spine, fusion disease at the adjacent motion segments may be a risk factor for potential neurological compromise and death.MethodsRadiograms of 10 patients 13 to 69 years of age presenting with neck/shoulder discomfort or pain with or without trauma history were examined. C3-4 synostosis was found incidentally in all patients on routine examination radiographs of cervical spine.ResultsAdjacent segment disease (ASD) was not found in the three patients younger than 39 years of age. Five of the 10 (50%) patients, including a 67-year-old man, did not develop spondylosis in any of the cervical mobile segments. Spondylosis was observed only in the caudal 1-2 mobile segments in the remaining five patients. The youngest was a 40-year-old male who had spondylosis in the two caudal mobile segments (C4-5 and C5-6). Spondylosis was limited to the two close caudal mobile segments and was not in the cranial segments. Flaring of the lower part of synostotic vertebra associated with advanced narrowed degenerate disc was evident in five patients.ConclusionsMobile segment spondylosis in the individuals with congenital monosegment C3-4 synostosis over age of 40 years may be a natural manifestation of aging and is not solely an adjacent segment disease directly and fully related with congenital C3-4 synostosis