The application of passive sampler (DGT) technology for improved understanding of metal behaviour at a marine disposal site

Metal behaviour and availability at a contaminated dredge material disposal site within UK waters has been investigated using Diffusive Gradient in Thin films (DGT) passive sampling technology. Three stations representing contrasting history and presence of maintenance dredge disposal, including a control station outside the disposal site, have been studied and depth profiles of fluxes of different metals (Fe, Mn, Pb, Cu, Cd, Cr, Ni, Zn) to the binding gel (Chelex 100) have been derived. Higher flux rates and shallower mobilisation of metals (Mn and Fe) to the binding gel were observed at the disposal stations compared to the control station. Here we describe metal mobilization at different depths, linking the remobilization of Fe2+ and Mn2+ to the sediment (re)supply of other heavy metals of interest with a focus on Cd, Ni and Pb and as they are on the Water Framework Directive (WFD) list of priority substances and OSPAR list of priority pollutants. Results showed that Cd, Pb and Ni exhibited signs of resupply at the sediment-water interface (SWI). There was a potential increased mobilisation and source to the water column of Pb and Ni at the disposal site stations, but there was no Cd source, despite higher total loadings. This information has the potential to improve our current understanding of metal cycles at disposal sites. This work can be used as an indication of likely metal bioavailability and also assist in determining whether the sites act as sources or sinks of heavy metals. This information could assist disposal site monitoring and dredge material licensing

Ultrasonic sensor for UAV flight navigation

Ultrasonic transducers were utilized for the design and development of an alternative method for flight instrumentation measurement of the velocity of unmanned air vehicles (UAVs). Current methods have been deemed to have significant shortcomings, such as the need for GPS thus leading to indoor UAV operations being incapable of velocity sensing. The proposed concept is developed from the utilization of ultrasonic transit-time flowmeters. A test bench has been produced to measure the accuracy and confirm the validity of the concept. Two key design variables were determined - the optimal transducer mounting configuration and the optimal angle of incidence for the transducer mountings. The mounting configurations were analyzed from common transit-time flowmeter sensor configurations and were tested using both CFD and acoustic simulations. The findings are presented and correlated based on these simulations and it was determined that a V-method configuration was the optimal choice. The correct angle of incidence was determined by an experimental methodology. The time-of-flight outputted from the transducers was compared to the calculated ideal value, and the findings revealed that an angle of 30° was the most accurate for the reflection of the emitted wave. The experimentation was conducted with a specially designed test bench and associated electronic hardware located in a wind tunnel. The test results have provided conclusive evidence that the overall design can produce accurate results comparable with current instrumentation sensors

Open Science in Software Engineering

Open science describes the movement of making any research artefact available to the public and includes, but is not limited to, open access, open data, and open source. While open science is becoming generally accepted as a norm in other scientific disciplines, in software engineering, we are still struggling in adapting open science to the particularities of our discipline, rendering progress in our scientific community cumbersome. In this chapter, we reflect upon the essentials in open science for software engineering including what open science is, why we should engage in it, and how we should do it. We particularly draw from our experiences made as conference chairs implementing open science initiatives and as researchers actively engaging in open science to critically discuss challenges and pitfalls, and to address more advanced topics such as how and under which conditions to share preprints, what infrastructure and licence model to cover, or how do it within the limitations of different reviewing models, such as double-blind reviewing. Our hope is to help establishing a common ground and to contribute to make open science a norm also in software engineering.Comment: Camera-Ready Version of a Chapter published in the book on Contemporary Empirical Methods in Software Engineering; fixed layout issue with side-note

The pattern of xylan acetylation suggests xylan may interact with cellulose microfibrils as a twofold helical screw in the secondary plant cell wall of Arabidopsis thaliana.

The interaction between xylan and cellulose microfibrils is important for secondary cell wall properties in vascular plants; however, the molecular arrangement of xylan in the cell wall and the nature of the molecular bonding between the polysaccharides are unknown. In dicots, the xylan backbone of β-(1,4)-linked xylosyl residues is decorated by occasional glucuronic acid, and approximately one-half of the xylosyl residues are O-acetylated at C-2 or C-3. We recently proposed that the even, periodic spacing of GlcA residues in the major domain of dicot xylan might allow the xylan backbone to fold as a twofold helical screw to facilitate alignment along, and stable interaction with, cellulose fibrils; however, such an interaction might be adversely impacted by random acetylation of the xylan backbone. Here, we investigated the arrangement of acetyl residues in Arabidopsis xylan using mass spectrometry and NMR. Alternate xylosyl residues along the backbone are acetylated. Using molecular dynamics simulation, we found that a twofold helical screw conformation of xylan is stable in interactions with both hydrophilic and hydrophobic cellulose faces. Tight docking of xylan on the hydrophilic faces is feasible only for xylan decorated on alternate residues and folded as a twofold helical screw. The findings suggest an explanation for the importance of acetylation for xylan-cellulose interactions, and also have implications for our understanding of cell wall molecular architecture and properties, and biological degradation by pathogens and fungi. They will also impact strategies to improve lignocellulose processing for biorefining and bioenergy.The work conducted by TT and NN was supported by a grant from the BBSRC: BB/G016240/1 BBSRC Sustainable Energy Centre Cell Wall Sugars Programme (BSBEC) to PD and DNB. The work of PD was supported by the European Community’s Seventh Framework Programme SUNLIBB (FP7/2007-2013) under the grant agreement #251132. The NMR facility infrastructure was supported by the BBSRC and the Wellcome Trust. TCFG thanks CNPq (Brazil) for a graduate fellowship (grant # 140978/2009-7). MSS thanks CEPROBIO (grant # 490022/2009- 0) and FAPESP for funding (grant #2013/08293-7).This is the accepted version of the following article: "Busse-Wicher, M; Gomes, T.C.F; Tryfona, T; Nikolovski, N; Stott, K; Grantham, N.J; Bolam, D.N; Skaf, M.S; Dupree, P. (2014) "The pattern of xylan acetylation suggests xylan may interact with cellulose microfibrils as a two-fold helical screw in the secondary plant cell wall of Arabidopsis thaliana." The Plant Journal. Accepted article [electronic] 10.1111/tpj.12575", which has been published in final form at http://onlinelibrary.wiley.com/doi/10.1111/tpj.12575/abstrac

Evaluating impacts of bottom trawling and hypoxia on benthic communities at the local, habitat, and regional scale using a modelling approach

Bottom trawling disturbance and hypoxia are affecting marine benthic habitats worldwide. We present an approach to predict their effects on benthic communities, and use the approach to estimate the state, the biomass relative to carrying capacity, of the Baltic Sea at the local, habitat, and regional scale. Responses to both pressures are expected to depend on the longevity of fauna, which is predicted from benthic data from 1558 locations. We find that communities in low-salinity regions mostly consist of short-lived species, which are, in our model, more resilient than those of the saline areas. The model predicts that in 14% of the Baltic Sea region benthic biomass is reduced by at least 50%, whereas an additional 8% of the region has reductions of 10-50%. The effects of hypoxia occur over larger spatial scales and lead to a low state of especially deep habitats. The approach is based on a simple characterization of the benthic community, which comes with high uncertainty, but allows for the identification of benthic habitats that are at greatest risk and prioritization of management actions at the regional scale. This information supports the development of sustainable approaches to manage impact of human activities on benthic ecosystems.</p

Teacher fabrication as an impediment to professional learning and development: the external mentor antidote

This paper reports findings from a study of the work of 'external mentors' associated with three programmes of support for the professional learning and development (PLD) of secondary science teachers in England. Focusing on outcomes from analyses of data derived from interviews with 47 mentees and 19 mentors, the paper supports and extends existing research on the construction and maintenance of fabrications in schools, and identifies omissions in the evidence base relating to teacher PLD. It is argued that the kinds of fabrications revealed by the teachers interviewed for this research present a serious impediment to their opportunities for school-based PLD, and that the deployment of external mentors (i.e. those not based in the same schools as the teachers they support) can provide a potentially powerful antidote to this. A number of implications for policy and practice in teacher professional learning and development are discussed. Amongst these, it is argued that more teachers should have the opportunity to access external support for their PLD, and that policy makers and head teachers should seek to reduce the degree to which teachers' 'performance' is observed, inspected and assessed

Salt-related knowledge, attitudes and behaviors (KABs) among Victorian adults following 22-Months of a consumer awareness campaign

The Australian population consumes more salt than recommended and this increases the risk of raised blood pressure and cardiovascular disease. In 2015, a state-wide initiative was launched in the Australian state of Victoria to reduce population salt intake. This study examines whether salt-related knowledge, attitudes and behaviors (KABs) of Victorian adults changed following the first 22 months of a consumer awareness campaign targeting parents. Repeated cross-sectional surveys of adults (18-65 years) recruited from research panels. Analyses were weighted to reflect the Victorian population. In both surveys mean age of participants (1584 in 2015 and 2141 in 2018) was 41 years, and 51% were female. This includes 554 parents/caregivers in 2015 and 799 in 2018. Most indicators of KAB remained unchanged. Among parents/caregivers the percentage who agreed limiting salt in their child's diet was important increased by 8% (p = 0.001), and there was a 10% reduction in the percentage who reported placing a saltshaker on the table and a 9% reduction in those who reported their child added salt at the table (both p < 0.001). Some small adverse effects on other indicators were also observed. During the first 22 months of a salt reduction consumer awareness campaign, there were limited changes in KAB overall, however the target audience reported positive changes regarding their children, which aligned with the campaign messages

Evaluation of a state-wide intervention on salt intake in primary schoolchildren living in Victoria, Australia

Objective: In 2015, the Victorian Salt Reduction Partnership launched a 4-year multifaceted salt reduction intervention designed to reduce salt intake by 1 g/d in children and adults living in Victoria, Australia. Child-relevant intervention strategies included a consumer awareness campaign targeting parents and food industry engagement seeking to reduce salt levels in processed foods. This study aimed to assess trends in salt intake, dietary sources of salt and discretionary salt use in primary schoolchildren pre- and post-delivery of the intervention. Design: Repeated cross-sectional surveys were completed at baseline (2010-2013) and follow-up (2018-2019). Salt intake was measured via 24-h urinary Na excretion, discretionary salt use behaviours by self-report and sources of salt by 24-h dietary recall. Data were analysed with multivariable-adjusted regression models. Setting: Victoria, Australia. Participants: Children aged 4-12 years Results: Complete 24-h urine samples were collected from 666 children at baseline and 161 at follow-up. Mean salt intake remained unchanged from baseline (6·0; se 0·1 g/d) to follow-up (6·1; 0·4 g/d) (P = 0·36), and there were no clear differences in the food sources of salt and at both time points approximately 70 % of children exceeded Na intake recommendations. At follow-up, 14 % more parents (P = 0·001) reported adding salt during cooking, but child use of table salt and inclusion of a saltshaker on the table remained unchanged. Conclusion: These findings show no beneficial effect of the Victorian Salt Reduction Partnership intervention on children's salt intake. More intensive, sustained and coordinated efforts between state and federal stakeholders are required