An easily installable groundwater lysimeter to determine waterbalance components and hydraulic properties of peat soils

International audienceA simple method for the installation of groundwater lysimeters in peat soils was developed which reduces both time and financial effort significantly. The method was applied on several sites in the Rhinluch, a fen peat land 60 km northwest of Berlin, Germany. Over a two-year period, upward capillary flow and evapotranspiration rates under grassland with different groundwater levels were measured. The installation of tensiometers and TDR probes additionally allowed the in situ determination of the soil hydraulic properties (water retention and unsaturated hydraulic conductivity). The results of the measurements of the unsaturated hydraulic conductivity demonstrate that more than one single method has to be applied if the whole range of the conductivity function from saturation to highly unsaturated is to be covered. Measuring the unsaturated conductivity can be done only in the lab for an adequately wide range of soil moisture conditions. Keywords: peat soils, soil hydraulic properties, evapotranspiration, capillary flow, root distribution, unsaturated zone</p

An easily installable groundwater lysimeter to determine waterbalance components and hydraulic properties of peat soils

A simple method for the installation of groundwater lysimeters in peat soils was developed which reduces both time and financial effort significantly. The method was applied on several sites in the Rhinluch, a fen peat land 60 km northwest of Berlin, Germany. Over a two-year period, upward capillary flow and evapotranspiration rates under grassland with different groundwater levels were measured. The installation of tensiometers and TDR probes additionally allowed the <i>in situ</i> determination of the soil hydraulic properties (water retention and unsaturated hydraulic conductivity). The results of the measurements of the unsaturated hydraulic conductivity demonstrate that more than one single method has to be applied if the whole range of the conductivity function from saturation to highly unsaturated is to be covered. Measuring the unsaturated conductivity can be done only in the lab for an adequately wide range of soil moisture conditions.</p> <p style='line-height: 20px;'><b>Keywords: </b>peat soils, soil hydraulic properties, evapotranspiration, capillary flow, root distribution, unsaturated zone</p

Reference Measurements of the Longitudinal Impedance in the CERN SPS

First reference measurements of the longitudinal impedance were made with beam in the SPS machine in 1999 to quantify the results of the impedance reduction programme, completed in 2001. The 2001 data showed that the low-frequency inductive impedance had been reduced by a factor 2.5 and that bunch lengthening due to the microwave instability was absent up to the ultimate LHC bunch intensity. Measurements of the quadrupole frequency shift with intensity in the following years suggest a significant increase in impedance (which nevertheless remains below the 1999 level) due to the installation of eight extraction kickers for beam transfer to the LHC. The experimental results are compared with expectations based on the known longitudinal impedance of the SPS

Orion Spacecraft MMOD Protection Design and Assessment

The Orion spacecraft will replace the Space Shuttle Orbiter for American and international partner access to the International Space Station by 2015 and, afterwards, for access to the moon for initial sorties and later for extended outpost visits as part of the Constellation Exploration Initiative. This work describes some of the efforts being undertaken to ensure that the Constellation Program, Orion Crew Exploration Vehicle design will meet or exceed the stringent micrometeoroid and orbital debris (MMOD) requirements set out by NASA when exposed to the environments encountered with these missions. This paper will provide a brief overview of the approaches being used to provide MMOD protection to the Orion vehicle and to assess the spacecraft for compliance to the Constellation Program s MMOD requirements

Medical Comorbidities and Functional Dependent Living Are Independent Risk Factors for Short-Term Complications Following Osteotomy Procedures about the Knee

© The Author(s) 2018. Objective: To characterize rates and risk factors for adverse events following distal femoral osteotomy (DFO), high tibial osteotomy (HTO), and tibial tubercle osteotomy (TTO) procedures. Design: Patients undergoing DFO, HTO, or TTO procedures during 2005 to 2016 were identified in the American College of Surgeons National Surgical Quality Improvement Program. Rates of adverse events were characterized for each procedure. Demographic, comorbidity, and procedural factors were tested for association with occurrence of any adverse events. Results: A total of 1,083 patients were identified. Of these, 305 (28%) underwent DFO, 273 (25%) underwent HTO, and 505 (47%) underwent TTO. Mean ages for patients undergoing each procedure were the following: DFO, 51 ± 23 years; HTO, 40 ± 13 years; and TTO, 31 ± 11 years. The most common comorbidities for DFO were hypertension (34%) and smoking (17%); for HTO, hypertension (22%) and smoking (21%); and for TTO, smoking (20%) and hypertension (11%). Independent risk factors for occurrence of any adverse event were age ⩾45 years for DFO (odds ratio [OR] = 3.1, P \u3c 0.001) and HTO (OR = 2.3, P = 0.029), and body mass index \u3e30 for HTO (OR = 2.5, 95% confidence interval = 1.1-5.7, P = 0.031). When all osteotomy procedures were analyzed collectively, additional variables including diabetes mellitus (OR = 2.2, P = 0.017), chronic obstructive pulmonary disease (OR = 5.5, P = 0.003), and dependent functional status (OR = 3.0, P = 0.004) were associated with adverse events. Conclusions: The total rate of adverse events was not independently associated with the type of osteotomy procedure. In addition, patients with age \u3e45, diabetes mellitus, chronic obstructive pulmonary disease, and dependent functional status have greater odds for adverse events and should be counseled and monitored accordingly

T160‐phosphorylated CDK2 defines threshold for HGF‐dependent proliferation in primary hepatocytes

Liver regeneration is a tightly controlled process mainly achieved by proliferation of usually quiescent hepatocytes. The specific molecular mechanisms ensuring cell division only in response to proliferative signals such as hepatocyte growth factor (HGF) are not fully understood. Here, we combined quantitative time-resolved analysis of primary mouse hepatocyte proliferation at the single cell and at the population level with mathematical modeling. We showed that numerous G1/S transition components are activated upon hepatocyte isolation whereas DNA replication only occurs upon additional HGF stimulation. In response to HGF, Cyclin:CDK complex formation was increased, p21 rather than p27 was regulated, and Rb expression was enhanced. Quantification of protein levels at the restriction point showed an excess of CDK2 over CDK4 and limiting amounts of the transcription factor E2F-1. Analysis with our mathematical model revealed that T160 phosphorylation of CDK2 correlated best with growth factor-dependent proliferation, which we validated experimentally on both the population and the single cell level. In conclusion, we identified CDK2 phosphorylation as a gate-keeping mechanism to maintain hepatocyte quiescence in the absence of HGF

Curvature-direction measures of self-similar sets

We obtain fractal Lipschitz-Killing curvature-direction measures for a large class of self-similar sets F in R^d. Such measures jointly describe the distribution of normal vectors and localize curvature by analogues of the higher order mean curvatures of differentiable submanifolds. They decouple as independent products of the unit Hausdorff measure on F and a self-similar fibre measure on the sphere, which can be computed by an integral formula. The corresponding local density approach uses an ergodic dynamical system formed by extending the code space shift by a subgroup of the orthogonal group. We then give a remarkably simple proof for the resulting measure version under minimal assumptions.Comment: 17 pages, 2 figures. Update for author's name chang

Proton acceleration by irradiation of isolated spheres with an intense laser pulse

We report on experiments irradiating isolated plastic spheres with a peak laser intensity of 2-3 x 10(20) W cm(-2). With a laser focal spot size of 10 mu m full width half maximum (FWHM) the sphere diameter was varied between 520 nm and 19.3 mu m. Maximum proton energies of similar to 25 MeV are achieved for targets matching the focal spot size of 10 mu m in diameter or being slightly smaller. For smaller spheres the kinetic energy distributions of protons become nonmonotonic, indicating a change in the accelerating mechanism from ambipolar expansion towards a regime dominated by effects caused by Coulomb repulsion of ions. The energy conversion efficiency from laser energy to proton kinetic energy is optimized when the target diameter matches the laser focal spot size with efficiencies reaching the percent level. The change of proton acceleration efficiency with target size can be attributed to the reduced cross-sectional overlap of subfocus targets with the laser. Reported experimental observations are in line with 3D3V particle in cell simulations. They make use of well-defined targets and point out pathways for future applications and experiments.DFG via the Cluster of Excellence Munich-Centre for Advanced Photonics (MAP) Transregio SFB TR18NNSA DE-NA0002008Super-MUC pr48meIvo CermakCGC Instruments in design and realization of the Paul trap systemIMPRS-APSLMUexcellent Junior Research FundDAAD|ToIFEEuropean Union's Horizon research and innovation programme 633053Physic

A Metric Discrepancy Result With Given Speed

It is known that the discrepancy DN{ kx} of the sequence { kx} satisfies NDN{ kx} = O((log N) (log log N) 1 + ε) a.e. for all ε> 0 , but not for ε= 0. For nk= θk, θ> 1 we have NDN{ nkx} ≦ (Σ θ+ ε) (2 Nlog log N) 1 / 2 a.e. for some 0 0 , but not for ε 0 , there exists a sequence { nk} of positive integers such that NDN{ nkx} ≦ (Σ + ε) Ψ (N) eventually holds a.e. for ε> 0 , but not for ε< 0. We also consider a similar problem on the growth of trigonometric sums. © 2016, Akadémiai Kiadó, Budapest, Hungary