DESIGN OF COMPOSITE MATERIAL FOR COST EFFECTIVE LARGE SCALE PRODUCTION OF COMPONENTS FOR FLOATING OFFSHORE STRUCTURES

Today, the European Union (EU) is dependent on import for 50% of its energy supply. By 2030 this could easily become 70 %. This makes the EU economically vulnerable. Hence, the EU made an effort to promote renewable energy. The SEEWEC project, an example of this, has been launched at the end of 2005 within the Sixth Framework of the EU. SEEWEC stands for Sustainable Economically Efficient Wave Energy Converter. One of the tasks of Ghent University, as a partner in the project, is the design of composite material for cost effective large scale production of floating point absorbers. For this, the first important steps are taken. A small filament winding machine has been designed to produce eggs on lab scale. For experimental tests on the strength of the egg and pressure distribution of the water, a set up for lab scale slamming tests was designed and built. The machine is designed for the testing of a variety of structures. Validation of the analytical formulas for slamming is to be achieved through these experiments. First, an assessment of the machine occurs by testing a rigid cone of 45 degrees for comparison with the Peseux model. Next, a rigid and a deformable cylinder will be tested and compared

On the detection of CO and mass loss of Bulge OH/IR stars

We report on the succesful search for CO (2-1) and (3-2) emission associated with OH/IR stars in the Galactic Bulge. We observed a sample of eight extremely red AGB stars with the APEX telescope and detected seven. The sources were selected at sufficient high galactic latitude to avoid interference by interstellar CO, which hampered previous studies of inner galaxy stars. To study the nature of our sample and the mass loss we constructed the SEDs from photometric data and Spitzer IRS spectroscopy. In a first step we apply radiative transfer modelling to fit the SEDs and obtain luminosities and dust mass loss rates (MLR). Through dynamical modelling we then retrieve the total MLR and the gas-to-dust ratios. We derived variability periods of our stars. The luminosities range between approximately 4000 and 5500 Lsun and periods are below 700 days. The total MLR ranges between 1E-5 and 1E-4 Msun/yr. Comparison with evolutionary models shows that the progenitor mass is approximately 1.5 Msun, similar to the Bulge Miras and are of intermediate age (3 Gyr). The gas-to-dust ratios are between 100 and 400 and are similar to what is found for OH/IR stars in the galactic Disk. One star, IRAS 17347-2319, has a very short period of approximately 300 days which may be decreasing further. It may belong to a class of Mira variables with a sudden change in period as observed in some Galactic objects. It would be the first example of an OH/IR star in this class and deserves further follow-up observations

Mid-infrared astronomy with the E-ELT: Performance of METIS

We present results of performance modelling for METIS, the Mid-infrared European Extremely Large Telescope (E-ELT) Imager and Spectrograph. Designed by a consortium of NOVA (Netherlands), UK Astronomy Technology Centre (UK), MPIA Heidelberg (Germany), CEA Saclay (France) and KU Leuven (Belgium), METIS will cover the atmospheric windows in L, M and N-band and will offer imaging, medium-resolution slit spectroscopy (R~1000-3000) and high-resolution integral field spectroscopy (R~100,000). Our model uses a detailed set of input parameters for site characteristics and atmospheric profiles, optical design, thermal background and the most up-to-date IR detector specifications. We show that METIS will bring an orders-of-magnitude level improvement in sensitivity and resolution over current ground-based IR facilities, bringing mid-IR sensitivities to the micro-Jansky regime. As the only proposed E-ELT instrument to cover this entire spectral region, and the only mid-IR high-resolution integral field unit planned on the ground or in space, METIS will open up a huge discovery space in IR astronomy in the next decade.Comment: 13 pages, submitted to SPIE Proceedings vol. 7735, Ground-based and Airborne Instrumentation for Astronomy III (2010). Simulation code available at http://tinyurl.com/metis-sen

Elemental abundances in AGB stars and the formation of the Galactic bulge

We obtained high-resolution near-IR spectra of 45 AGB stars located in the Galactic bulge. The aim of the project is to determine key elemental abundances in these stars to help constrain the formation history of the bulge. A further aim is to link the photospheric abundances to the dust species found in the winds of the stars. Here we present a progress report of the analysis of the spectra.Comment: 2 pages, 1 figure. To appear in the proceedings of the conference "Assembling the Puzzle of the Milky Way", Le Grand-Bornand, France, 17-22 April 2011, European Physical Journal, editors C. Reyl\'e, A. Robin and M. Schulthei

ISO observations of obscured Asymptotic Giant Branch stars in the Large Magellanic Cloud

We present ISO photometric and spectroscopic observations of a sample of 57 bright Asymptotic Giant Branch stars and red supergiants in the Large Magellanic Cloud, selected on the basis of IRAS colours indicative of high mass-loss rates. PHOT-P and PHOT-C photometry at 12, 25 and 60 $\mu$m and CAM photometry at 12 $\mu$m are used in combination with quasi-simultaneous ground-based near-IR photometry to construct colour-colour diagrams for all stars in our sample. PHOT-S and CAM-CVF spectra in the 3 to 14 $\mu$m region are presented for 23 stars. From the colour-colour diagrams and the spectra, we establish the chemical types of the dust around 49 stars in this sample. Many stars have carbon-rich dust. The most luminous carbon star in the Magellanic Clouds has also a (minor) oxygen-rich component. OH/IR stars have silicate absorption with emission wings. The unique dataset presented here allows a detailed study of a representative sample of thermal-pulsing AGB stars with well-determined luminosities.Comment: 19 pages, 10 figures. Accepted for publication in Astronomy and Astrophysics Main Journa

Correcting METIS spectra for telluric absorption to maximize spectral fidelity

METIS is a mid-infrared instrument proposed for the European Extremely Large Telescope (E-ELT). It is designed to provide imaging and spectroscopic capabilities in the 3 - 14 micron region up to a spectral resolution of 100000. One of the novel concepts of METIS is that of a high-resolution integral field spectrograph (IFS) for a diffraction-limited mid-IR instrument. While this concept has many scientific and operational advantages over a long-slit spectrograph, one drawback is that the spectral resolution changes over the field of view. This has an impact on the procedures to correct for telluric absorption lines imprinted on the science spectra. They are a major obstacle in the quest to maximize spectral fidelity, the ability to distinguish a weak spectral feature from the continuum. The classical technique of division by a standard star spectrum, observed in a single IFS spaxel, cannot simply be applied to all spaxels, because the spectral resolution changes from spaxel to spaxel. Here we present and discuss possible techniques of telluric line correction of METIS IFS spectra, including the application of synthetic model spectra of telluric transmission, to maximize spectral fidelity.Comment: 11 pages, 3 figures; Copyright (2010) Society of Photo-Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibite

METIS - the Mid-infrared E-ELT Imager and Spectrograph

METIS, the Mid-infrared ELT Imager and Spectrograph (formerly called MIDIR), is a proposed instrument for the European Extremely Large Telescope (E-ELT), currently undergoing a phase-A study. The study is carried out within the framework of the ESO-sponsored E-ELT instrumentation studies. METIS will be designed to cover the E-ELT science needs at wavelengths longward of 3um, where the thermal background requires different operating schemes. In this paper we discuss the main science drivers from which the instrument baseline has been derived. Specific emphasis has been given to observations that require very high spatial and spectral resolution, which can only be achieved with a ground-based ELT. We also discuss the challenging aspects of background suppression techniques, adaptive optics in the mid-IR, and telescope site considerations. The METIS instrument baseline includes imaging and spectroscopy at the atmospheric L, M, and N bands with a possible extension to Q band imaging. Both coronagraphy and polarimetry are also being considered. However, we note that the concept is still not yet fully consolidated. The METIS studies are being performed by an international consortium with institutes from the Netherlands, Germany, France, United Kingdom, and Belgium.Comment: 15 pages, to be published in Proc SPIE 7014: Ground-based & Airborne Instrumentation for Astronomy I

Partitioned simulation of the interaction between an elastic structure and free surface flow

Currently, the interaction between free surface flow and an elastic structure is simulated with monolithic codes which calculate the deformation of the structure and the liquid–gas flow simultaneously. In this work, this interaction is calculated in a partitioned way with a separate flow solver and a separate structural solver using the interface quasi-Newton algorithm with approximation for the inverse of the Jacobian from a least-squares model (IQN-ILS). The interaction between an elastic beam and a sloshing liquid in a rolling tank is calculated and the results agree well with experimental data. Subsequently, the impact of both a rigid cylinder and a flexible composite cylinder on a water surface is simulated to assess the effect of slamming on the components of certain wave-energy converters. The impact pressure on the bottom of the rigid cylinder is nearly twice as high as on the flexible cylinder, which emphasizes the need for fluid–structure interaction calculations in the design process of these wave-energy converters. For both the rolling tank simulations and the impact simulations, grid refinement is performed and the IQN-ILS algorithm requires the same number of iterations on each grid. The simulations on the coarse grid are also executed using Gauss-Seidel coupling iterations with Aitken relaxation which requires significantly more coupling iterations per time step