Nanoscopic tip sensors fabricated by gas phase etching of optical glass fibers

Silica-based fiber tips are used in a variety of spectroscopic, micro- or nano-scopic optical sensor applications and photonic micro-devices. The miniaturization of optical sensor systems and the technical implementation using optical fibers can provide new sensor designs with improved properties and functionality for new applications. The selective-etching of specifically doped silica fibers is a promising method in order to form complex photonic micro structures at the end or within fibers such as tips and cavities in various shapes useful for the all-fiber sensor and imaging applications. In the present study, we investigated the preparation of geometrically predefined, nanoscaled fiber tips by taking advantage of the dopant concentration profiles of highly doped step-index fibers. For this purpose, a gas phase etching process using hydrofluoric acid (HF) vapor was applied. The shaping of the fiber tips was based on very different etching rates as a result of the doping characteristics of specific optical fibers. Technological studies on the influence of the etching gas atmosphere on the temporal tip shaping and the final geometry were performed using undoped and doped silica fibers. The influence of the doping characteristics was investigated in phosphorus-, germanium-, fluorine- and boron-doped glass fibers. Narrow exposed as well as protected internal fiber tips in various shapes and tip radiuses down to less than 15 nm were achieved and characterized geometrically and topologically. For investigations into surface plasmon resonance effects, the fiber tips were coated with nanometer-sized silver layers by means of vapour deposition and finally subjected to an annealing treatment

Ultra-high sensitive strain sensor based on post-processed optical fiber Bragg grating

An ultra-high sensitive strain sensor is proposed. The sensing head, based on the post-processing of a fiber Bragg grating, is used to perform passive and active strain measurements. Both wavelength and full width half maximum dependences with the applied strain are studied for the passive sensor, where maximum sensitivities of 104.1 pm/με and 61.6 pm/με are respectively obtained. When combining the high performance of this sensor with a ring laser cavity configuration, the Bragg grating will act as a filter and high resolution measurements can be performed. With the proposed sensor, a resolution of 700 nε is achieved

Diffusion and interface effects during preparation of all-solid microstructured fibers

All-solid microstructured optical fibers (MOF) allow the realization of very flexible optical waveguide designs. They are prepared by stacking of doped silica rods or canes in complex arrangements. Typical dopants in silica matrices are germanium and phosphorus to increase the refractive index (RI), or boron and fluorine to decrease the RI. However, the direct interface contact of stacking elements often causes interrelated chemical reactions or evaporation during thermal processing. The obtained fiber structures after the final drawing step thus tend to deviate from the targeted structure risking degrading their favored optical functionality. Dopant profiles and design parameters(e.g., the RI homogeneity of the cladding) are controlled by the combination of diffusion and equilibrium conditions of evaporation reactions. We show simulation results of diffusion and thermal dissociation in germanium and fluorine doped silica rod arrangements according to the monitored geometrical disturbances in stretched canes or drawn fibers. The paper indicates geometrical limits of dopant structures in sub-μm-level depending on the dopant concentration and the thermal conditions during the drawing process. The presented results thus enable an optimized planning of the preform parameters avoiding unwanted alterations in dopant concentration profiles or in design parameters encountered during the drawing process

Scaling of oscillatory kinematics and Froude efficiency in baleen whales

High efficiency lunate-tail swimming with high-aspect-ratio lifting surfaces has evolved in many vertebrate lineages, from fish to cetaceans. Baleen whales (Mysticeti) are the largest swimming animals that exhibit this locomotor strategy, and present an ideal study system to examine how morphology and the kinematics of swimming scale to the largest body sizes. We used data from whale-borne inertial sensors coupled with morphometric measurements from aerial drones to calculate the hydrodynamic performance of oscillatory swimming in six baleen whale species ranging in body length from 5 to 25 m (fin whale, Balaenoptera physalus; Bryde\u27s whale, Balaenoptera edeni; sei whale, Balaenoptera borealis; Antarctic minke whale, Balaenoptera bonaerensis; humpback whale, Megaptera novaeangliae; and blue whale, Balaenoptera musculus). We found that mass-specific thrust increased with both swimming speed and body size. Froude efficiency, defined as the ratio of useful power output to the rate of energy input (Sloop, 1978), generally increased with swimming speed but decreased on average with increasing body size. This finding is contrary to previous results in smaller animals, where Froude efficiency increased with body size. Although our empirically parameterized estimates for swimming baleen whale drag were higher than those of a simple gliding model, oscillatory locomotion at this scale exhibits generally high Froude efficiency as in other adept swimmers. Our results quantify the fine-scale kinematics and estimate the hydrodynamics of routine and energetically expensive swimming modes at the largest scale

Integrating Traditional Healers into the Health Care System:Challenges and Opportunities in Rural Northern Ghana

Traditional medicine is widespread in Ghana, with 80% of Ghanaians relying on its methods for primary health care. This paper argues that integrating traditional and biomedical health systems expands the reach and improves outcomes of community health care. Moving beyond literature, it stresses the importance of trust-relationships between healers and biomedical staff. Insights are based on qualitative research conducted in Ghana’s Northern Region (2013–2014). Five challenges to integration emerged out of the data: a lack of understanding of traditional medicine, discrimination, high turnover of biomedical staff, declining interest in healing as a profession, and equipment scarcity. Besides challenges, opportunities for integration exist, including the extensive infrastructure of traditional medicine, openness to collaboration, and grassroots initiatives. Contemplating challenges and opportunities this paper provides recommendations for integration, including: identify/select healers, promote best practices, institute appropriate forms of appreciation/recognition of healers, provide aid and equipment, use communication campaigns to promote integration and steer attitudinal change towards healers among biomedical staff. Most crucial, we argue successful implementation of these recommendations depends on a concerted investment in relationships between healers and biomedical staff

Seeking treatment for symptomatic malaria in Papua New Guinea

Background: Malaria places a significant burden on the limited resources of many low income countries. Knowing more about why and where people seek treatment will enable policy makers to better allocate the limited resources. This study aims to better understand what influences treatment-seeking behaviour for malaria in one such low-income country context, Papua New Guinea (PNG). Methods: Two culturally, linguistically and demographically different regions in PNG were selected as study sites. A cross sectional household survey was undertaken in both sites resulting in the collection of data on 928 individuals who reported suffering from malaria in the previous four weeks. A probit model was then used to identify the factors determining whether or not people sought treatment for presumptive malaria. Multinomial logit models also assisted in identifying the factors that determined where people sought treatments. Results: Results in this study build upon findings from other studies. For example, while distance in PNG has previously been seen as the primary factor in influencing whether any sort of treatment will be sought, in this study cultural influences and whether it was the first, second or even third treatment for a particular episode of malaria were also important. In addition, although formal health care facilities were the most popular treatment sources, it was also found that traditional healers were a common choice. In turn, the reasons why participants chose a particular type of treatment differed according to the whether they were seeking an initial or subsequent treatments. Conclusions: Simply bringing health services closer to where people live may not always result in a greater use of formal health care facilities. Policy makers in PNG need to consider within-country variation in treatment-seeking behaviour, the important role of traditional healers and also ensure that the community fully understands the potential implications of not seeking treatment for illnesses such as malaria at a formal health care facility.Carol P Davy, Elisa Sicuri, Maria Ome, Ellie Lawrence-Wood, Peter Siba, Gordon Warvi, Ivo Mueller and Lesong Conte