4,923 research outputs found
Observation of Zeeman shift in the rubidium D2 line using an optical nanofiber in vapor
We report on the observation of a Zeeman shift (order of 100 MHz) of the
Doppler-broadened D2 transition of both 85Rb and 87Rb isotopes via transmission
through a tapered optical nanofiber in the presence of a DC magnetic field.
Linearly-polarized light propagating in the nanofiber is analyzed as a
superposition of two orthogonally circularly-polarized orientations, {\sigma}+
and {\sigma}-. In the absence of the magnetic field, the absorption of these
polarizations by the atomic vapor, via the evanescent field at the waist of the
nanofiber, is degenerate. When a weak magnetic field is applied parallel to the
propagating light, this degeneracy is lifted and relative shifts in the
resonance frequencies are detected. Typical linear shift rates of 1.6 MHz/G and
-2.0 MHz/G were observed. We also demonstrate a dichroic atomic vapor laser
lock line shape by monitoring the real-time subtraction of the two
magnetically-shifted absorption spectra. This is particularly interesting for
magneto-optical experiments as it could be directly implemented for diode laser
frequency-stabilization
Dictionary Learning and Sparse Coding-based Denoising for High-Resolution Task Functional Connectivity MRI Analysis
We propose a novel denoising framework for task functional Magnetic Resonance
Imaging (tfMRI) data to delineate the high-resolution spatial pattern of the
brain functional connectivity via dictionary learning and sparse coding (DLSC).
In order to address the limitations of the unsupervised DLSC-based fMRI
studies, we utilize the prior knowledge of task paradigm in the learning step
to train a data-driven dictionary and to model the sparse representation. We
apply the proposed DLSC-based method to Human Connectome Project (HCP) motor
tfMRI dataset. Studies on the functional connectivity of cerebrocerebellar
circuits in somatomotor networks show that the DLSC-based denoising framework
can significantly improve the prominent connectivity patterns, in comparison to
the temporal non-local means (tNLM)-based denoising method as well as the case
without denoising, which is consistent and neuroscientifically meaningful
within motor area. The promising results show that the proposed method can
provide an important foundation for the high-resolution functional connectivity
analysis, and provide a better approach for fMRI preprocessing.Comment: 8 pages, 3 figures, MLMI201
Quantitative Nanofriction Characterization of Corrugated Surfaces by Atomic Force Microscopy
Atomic Force Microscopy (AFM) is a suitable tool to perform tribological
characterization of materials down to the nanometer scale. An important aspect
in nanofriction measurements of corrugated samples is the local tilt of the
surface, which affects the lateral force maps acquired with the AFM. This is
one of the most important problems of state-of-the-art nanotribology, making
difficult a reliable and quantitative characterization of real corrugated
surfaces. A correction of topographic spurious contributions to lateral force
maps is thus needed for corrugated samples. In this paper we present a general
approach to the topographic correction of AFM lateral force maps and we apply
it in the case of multi-asperity adhesive contact. We describe a complete
protocol for the quantitative characterization of the frictional properties of
corrugated systems in the presence of surface adhesion using the AFM.Comment: 33 pages, 9 figures, RevTex 4, submitted to Journal of Applied
Physic
Occurrence of Salmonella enterica, subspecies enterica serovar Berta (Salmonella Berta) in bovine calves, in Himachal Pradesh, India
Salmonellosis is an important zoonotic disease of economic significance. It infects both man and animals alike around the globe. Salmonella enterica, subspecies enterica serovar Berta (9,12: f, g, t:-) was isolated from three out of five blood samples of 3-6-month-old ailing calves. The isolates were sensitive to ciprofloxacin, enrofloxacin, ofloxacin and moderately sensitive to gentamicin, lomefloxacin, oxytetracyclines, tetracyclines, but refractory to ampicillin and penicillin. Treatment with enrofloxacin resulted in cent per cent recovery. The infection might have been picked up by calves from poultry birds reared in the same premises. Key words: enrofloxacin, Jersey cross-bred calves, Salmonella Bert
The effect of autocorrelation length on the real area of contact and friction behavior of rough surfaces
Autocorrelation length (ACL) is a surface roughness parameter that provides spatial information of surfacetopography that is not included in amplitude parameters such as root-mean-square roughness. This paper presents a relationship between ACL and the friction behavior of a rough surface. The influence of ACL on the peak distribution of a profile is studied based on Whitehouse and Archard’s classical analysis [Whitehouse and ArchardProc. R. Soc. London, Ser. A316, 97 (1970)] and their results are extended to compare profiles from different surfaces. The probability density function of peaks and the mean peak height of a profile are given as functions of its ACL. These results are used to estimate the number of contact points when a rough surface comes into contact with a flat surface, and it is shown that the larger the ACL of the rough surface, the less the number of contact points. Based on Hertzian contact mechanics, it is shown that the real area of contact increases with increasing of number of contact points. Since adhesivefriction force is proportional to the real area of contact, this suggests that the adhesivefriction behavior of a surface will be inversely proportional to its ACL. Results from microscale friction experiments on polished and etchedsiliconsurfaces are presented to verify the analysis
Theory of friction: contribution from fluctuating electromagnetic field
We calculate the friction force between two semi-infinite solids in relative
parallel motion (velocity ), and separated by a vacuum gap of width . The
friction force result from coupling via a fluctuating electromagnetic field,
and can be considered as the dissipative part of the van der Waals interaction.
We consider the dependence of the friction force on the temperature , and
present a detailed discussion of the limiting cases of small and large and
.Comment: 15 pages, No figure
Atomic Scale Sliding and Rolling of Carbon Nanotubes
A carbon nanotube is an ideal object for understanding the atomic scale
aspects of interface interaction and friction. Using molecular statics and
dynamics methods different types of motion of nanotubes on a graphite surface
are investigated. We found that each nanotube has unique equilibrium
orientations with sharp potential energy minima. This leads to atomic scale
locking of the nanotube.
The effective contact area and the total interaction energy scale with the
square root of the radius. Sliding and rolling of nanotubes have different
characters. The potential energy barriers for sliding nanotubes are higher than
that for perfect rolling. When the nanotube is pushed, we observe a combination
of atomic scale spinning and sliding motion. The result is rolling with the
friction force comparable to sliding.Comment: 4 pages (two column) 6 figures - one ep
Preliminary Investigation of the Frictional Response of Reptilian Shed Skin
Developing deterministic surfaces relies on controlling the structure of the
rubbing interface so that not only the surface is of optimized topography, but
also is able to self-adjust its tribological behaviour according to the
evolution of sliding conditions. In seeking inspirations for such designs, many
engineers are turning toward the biological world to correlate surface
structure to functional behavior of bio-analogues. From a tribological point of
view, squamate reptiles offer diverse examples where surface texturing,
submicron and nano-scale features, achieve frictional regulation. In this
paper, we study the frictional response of shed skin obtained from a snake
(Python regius). The study employed a specially designed tribo-acoustic probe
capable of measuring the coefficient of friction and detecting the acoustical
behavior of the skin in vivo. The results confirm the anisotropy of the
frictional response of snakes. The coefficient of friction depends on the
direction of sliding: the value in forward motion is lower than that in the
backward direction. In addition it is shown that the anisotropy of the
frictional response may stem from profile asymmetry of the individual fibril
structures present within the ventral scales of the reptil
- …
