Role of calcium phosphate and bioactive glass coating on in vivo bone healing of new Mg-Zn-Ca implant

Present investigation focuses on development and detailed characterization of a new Mg alloy sample (BM) with and without coating of hydroxyapatite (BMH) and bioactive glass (BMG) by air plasma spray method. After detailed mechano-physico-chemical characterization of powders and coated samples, electrochemical corrosion and SBF immersion tests were carried out. Detailed in vitro characterizations for cell viability were undertaken using MG-63 cell line followed by in vivo tests in rabbit model for studying bone healing up to 60 days. Starting current density increases from BM to BMH to BMG indicating highest resistance towards corrosion in case of BMG samples, however BMH also showed highest i(corr) value suggesting slowest rate of corrosion than BM and BMG samples. Dissolution of calcium ion in case of BMH and BMG control formation of apatite phases on surface. Ca2+ ions of coatings and from SBF solution underwent reduction reaction simultaneously with conversion of Mg to MgCl2 releasing OH- in the solution, which increases pH. Viability and propagation of human osteoblast-like cells was verified using confocal microscopy observations and from expression of bone specific genes. Alkaline phosphatase assay and ARS staining indicate cell proliferation and production of neo-osseous tissue matrix. In vivo, based on histology of heart, kidney and liver, and immune response of IL-2, IL-6 and TNF alpha, all the materials show no adverse effects in body system. The bone creation was observed to be more for BMH. Although both BMH and BMG show rays of possibilities in early new bone formation and tough bone-implant bonding at interface as compared to bare Mg alloy, however, BMG showed better well-sprayed coating covering on substrate and resistance against corrosion prior implanting in vivo. Also, better apatite formation on this sample makes it more favourable implant. GRAPHICS]

Significance of Crosslinking Approaches in the Development of Next Generation Hydrogels for Corneal Tissue Engineering

Medical conditions such as trachoma, keratoconus and Fuchs endothelial dystrophy can damage the cornea, leading to visual deterioration and blindness and necessitating a cornea transplant. Due to the shortage of donor corneas, hydrogels have been investigated as potential corneal replacements. A key factor that influences the physical and biochemical properties of these hydrogels is how they are crosslinked. In this paper, an overview is provided of different crosslinking techniques and crosslinking chemical additives that have been applied to hydrogels for the purposes of corneal tissue engineering, drug delivery or corneal repair. Factors that influence the success of a crosslinker are considered that include material composition, dosage, fabrication method, immunogenicity and toxicity. Different crosslinking techniques that have been used to develop injectable hydrogels for corneal regeneration are summarized. The limitations and future prospects of crosslinking strategies for use in corneal tissue engineering are discussed. It is demonstrated that the choice of crosslinking technique has a significant influence on the biocompatibility, mechanical properties and chemical structure of hydrogels that may be suitable for corneal tissue engineering and regenerative applications

Significance of Crosslinking Approaches in the Development of Next Generation Hydrogels for Corneal Tissue Engineering

Medical conditions such as trachoma, keratoconus and Fuchs endothelial dystrophy can damage the cornea, leading to visual deterioration and blindness and necessitating a cornea transplant. Due to the shortage of donor corneas, hydrogels have been investigated as potential corneal replacements. A key factor that influences the physical and biochemical properties of these hydrogels is how they are crosslinked. In this paper, an overview is provided of different crosslinking techniques and crosslinking chemical additives that have been applied to hydrogels for the purposes of corneal tissue engineering, drug delivery or corneal repair. Factors that influence the success of a crosslinker are considered that include material composition, dosage, fabrication method, immunogenicity and toxicity. Different crosslinking techniques that have been used to develop injectable hydrogels for corneal regeneration are summarized. The limitations and future prospects of crosslinking strategies for use in corneal tissue engineering are discussed. It is demonstrated that the choice of crosslinking technique has a significant influence on the biocompatibility, mechanical properties and chemical structure of hydrogels that may be suitable for corneal tissue engineering and regenerative applications

Animal trial on zinc doped hydroxyapatite: A case study

Calcium hydroxyapatite (HAp) has widely been used as bone substitute due to its good biocompatibility and bioactivity. In the present work, hydroxyapatite was doped with zinc (Zn) to improve its bioactivity. The study reports the technique to synthesize Zn-doped HAp powder using a simple, economic route and the influence of this dopant on the physical, mechanical and biological properties of the HAp. Porous blocks were prepared by sintering at 1150 °C and the sintered samples were characterized using XRD and FTIR. In vitro bioresorption behavior of the sintered blocks was assessed in simulated body fluid (SBF) maintained in a dynamic state. The in vivo study was exclusively conducted to evaluate healing of surgically created defects on the tibia of adult New Zealand rabbit after implantation of HAp. Local inflammatory reaction and healing of wound, radiological investigations, histological and SEM studies, oxytetracycline labeling and mechanical push-out test were performed up to 60 days post-operatively. It was observed that Zn substituted HAp showed better osteointegration than undoped HAp. Radiology revealed progressively less contrast between implant and surrounding bone. New bone formation in Zn-doped HAp was more prompt. Mechanical push-out test showed high interfacial strength (nearly 2.5 times) between host bone and doped implant

Optimization and evaluation of oxygen-plasma-modified, aligned, poly (Є-caprolactone) and silk fibroin nanofibrous scaffold for corneal stromal regeneration

The shortage of human donor corneas for transplantation necessitates the exploration of tissue engineering approaches to develop corneal substitutes. However, these substitutes must possess the necessary strength, transparency, and ability to regulate cell behaviour before they can be used in patients. In this study, we investigated the effectiveness of an oxygen plasma surface-modified poly-ε-caprolactone (PCL) combined with silk fibroin (SF) nanofibrous scaffold for corneal stromal regeneration. To fabricate the electrospun scaffolds, PCL and SF blends were used on a rotating mandrel. The optimization of the blend aimed to replicate the structural and functional properties of the human cornea, focusing on nanofibre alignment, mechanical characteristics, and in vitro cytocompatibility with human corneal stromal keratocytes. Surface modification of the scaffold resulted in improved transparency and enhanced cell interaction. Based on the evaluation, a composite nanofibrous scaffold with a 1:1 blend of PCL and SF was selected for a more comprehensive analysis. The biological response of keratocytes to the scaffold was assessed through cellular adhesion, proliferation, cytoskeletal organization, gene expression, and immunocytochemical staining. The scaffold facilitated the adhesion of corneal stromal cells, supporting cell proliferation, maintaining normal cytoskeletal organization, and promoting increased expression of genes associated with healthy corneal stromal keratocytes. These findings highlight the potential of a surface-modified PCL/SF blend (1:1) as a promising scaffolding material for corneal stromal regeneration. The developed scaffold not only demonstrated favourable biological interactions with corneal stromal cells but also exhibited characteristics aligned with the requirements for successful corneal tissue engineering. Further research and refinement of these constructs could lead to significant advancements in addressing the shortage of corneas for transplantation, ultimately improving the treatment outcomes for patients in need

Carbon nanofiber reinforced nonmulberry silk protein fibroin nanobiocomposite for tissue engineering applications

Natural silk protein fibroin based biomaterial are exploited extensively in tissue engineering due to their aqueous preparation, slow biodegradability, mechanical stability, low immunogenicity, dielectric properties, tunable properties, sufficient and easy availability. Carbon nanofibers are reported for their conductivity, mechanical strength and as delivery vehicle of small molecules. Limited evidence about their cytocompatibility and their poor dispersibility are the key issues for them to be used as successful biomaterials. In this study, carbon nanofiber is functionalized and dispersed using the green aqueous-based method within the regenerated nonmulberry (tropical tasar: Antheraea mylitta) silk fibroin (AmF), which contains inherent – R-G-D- sequences. Carbon Nanofiber (CNF) reinforced silk films are fabricated using solvent evaporation technique. Different biophysical characterizations and cytocompatibility of the composite matrices are assessed. The investigations show that the presence of the nanofiber greatly influence the property of the composite films in terms of excellent conductivity (up to 6.4 × 10–6 Mho cm, which is 3 orders of magnitude of pure AmF matrix), and superior tensile modulus (up to 1423 MPa, which is 12.5 times more elastic than AmF matrix). The composite matrices (composed of up to 1 mg of CNF per mL of 2% AmF) also support better fibroblast cell growth and proliferation. The fibroin-carbon nanofiber matrices can lead to a novel multifunctional biomaterial platform, which will support conductive as well as load bearing tissue (such as, muscle, bone, and nerve tissue) regenerations

Impact of propeptide cleavage on the stability and activity of a streptococcal immunomodulatory C5a peptidase for biopharmaceutical development

Posttranslational modifications of proteins can impact their therapeutic efficacy, stability, and potential for pharmaceutical development. The Group AStreptococcus pyogenesC5a peptidase (ScpA) is a multi-domain protein composed of an N-terminal signal peptide, a catalytic domain (including propeptide), three fibronectin domains, and cell membrane-associated domains. It is one of several proteins produced by Group AS. pyogenesknown to cleave components of the human complement system. After signal peptide removal, ScpA undergoes autoproteolysis and cleaves its propeptide for full maturation. The exact location and mechanism of the propeptide cleavage, and the impact of this cleavage on stability and activity, are not clearly understood, and the exact primary sequence of the final enzyme is not known. A form of ScpA with no autoproteolysis fragments of propeptide present may be more desirable for pharmaceutical development from a regulatory and a biocompatibility in the body perspective. The current study describes an in-depth structural and functional characterization of propeptide truncated variants of ScpA expressed inEscherichia colicells. All three purified ScpA variants, ScpA, 79ΔPro, and 92ΔPro, starting with N32, D79, and A92 positions, respectively, showed similar activity against C5a, which suggests a propeptide-independent activity profile of ScpA. CE-SDS and MALDI top-down sequencing analyses highlight a time-dependent propeptide autoproteolysis of ScpA at 37 °C with a distinct end point at A92 and/or D93. In comparison, all three variants of ScpA exhibit similar stability, melting temperatures, and secondary structure orientation. In summary, this work not only highlights propeptide localization but also provides a strategy to recombinantly produce a final mature and active form of ScpA without any propeptide-related fragments.</p

Biomedical applications of silk and its role for intervertebral disc repair

Intervertebral disc (IVD) degeneration (IDD) is the main contributor to chronic low back pain. To date, the present therapies mainly focus on treating the symptoms caused by IDD rather than addressing the problem itself. For this reason, researchers have searched for a suitable biomaterial to repair and/or regenerate the IVD. A promising candidate to fill this gap is silk, which has already been used as a biomaterial for many years. Therefore, this review aims first to elaborate on the different origins from which silk is harvested, the individual composition, and the characteristics of each silk type. Another goal is to enlighten why silk is so suitable as a biomaterial, discuss its functionalization, and how it could be used for tissue engineering purposes. The second part of this review aims to provide an overview of preclinical studies using silk-based biomaterials to repair the inner region of the IVD, the nucleus pulposus (NP), and the IVD's outer area, the annulus fibrosus (AF). Since the NP and the AF differ fundamentally in their structure, different therapeutic approaches are required. Consequently, silk-containing hydrogels have been used mainly to repair the NP, and silk-based scaffolds have been used for the AF. Although most preclinical studies  have shown promising results in IVD-related repair and regeneration, their clinical transition is yet to come. </p

Development of nano-porous hydroxyapatite coated e-glass for potential bone-tissue engineering application: An in vitro approach

To reconstruct the defects caused by craniectomies autologous, bone grafting was usually used, but they failed most commonly due to bone resorption, infections and donor-site morbidity. In the present investigation, an effort has been made for the first time to check the feasibility and advantage of using hydroxyapatite (HAp) coated e-glass as component of bone implants. Sol-gel synthesized coatings were found to be purely hydroxyapatite from XRD with graded and interconnected pores all over the surface observable in TEM. The interconnected porous nature of ceramics are found to increase bioactivity by acting to up-regulate the process of osseointegration through enhanced nutrient transfer and induction of angiogenesis. From TEM studies and nano indentation studies, we have shown that pores were considered to be appropriate for nutrient supply without compromising the strength of sample while in contact with physiological fluid. After SBF immersion test, porous surface was found to be useful for nucleation of apatite crystals, hence increasing the feasibility and bioactivity of sample. However, our quasi-dynamic study showed less crystallization but had significant formation of apatite layer. Overall, the in vitro analyses show that HAp coated e-glass leads to significant improvement of implant properties in terms of biocompatibility, cell viability and proliferation, osteoinductivity and osteoconductivity. HAp coating of e-glass can potentially be utilized in fabricating durable and strong bioactive non-metallic implants and tissue engineering scaffolds