Formation of pyrene excimers in mesoporous ormosil thin films for visual detection of nitro-explosives

Cataloged from PDF version of article.We report the preparation of mesoporous thin films with bright pyrene excimer emission and their application in visual and rapid detection of nitroaromatic explosive vapors. The fluorescent films were produced by physically encapsulating pyrene molecules in the organically modified silica (ormosil) networks which were prepared via a facile template-free sol-gel method. Formation and stability of pyrene excimer emission were investigated in both porous and nonporous ormosil thin films. Excimer emission was significantly brighter and excimer formation ability was more stable in porous films compared to nonporous films. Rapid and selective quenching was observed in the excimer emission against vapors of nitroaromatic molecules; trinitrotoluene (TNT), dinitrotoluene (DNT), and nitrobenzene (NB). Fluorescence quenching of the films can be easily observed under UV light, enabling the naked-eye detection of nitro-explosives. Furthermore, excimer emission signal can be recovered after quenching and the films can be reused at least five times

Nanoconfinement of pyrene in mesostructured silica nanoparticles for trace detection of TNT in aqueous phase

Cataloged from PDF version of article.This article describes the preparation of pyrene confined mesostructured silica nanoparticles for the trace detection of trinitrotoluene (TNT) in the aqueous phase. Pyrene confined mesostructured silica nanoparticles were prepared using a facile one-pot method where pyrene molecules were first encapsulated in the hydrophobic parts of cetyltrimethylammonium micelles and then silica polymerized around these micelles. The resulting hybrid particles have sizes of around 75 nm with fairly good size distribution. Also, they are highly dispersible and colloidally stable in water. More importantly, they exhibit bright and highly stable pyrene excimer emission. We demonstrated that excimer emission of the particles exhibits a rapid, sensitive and visual quenching response against TNT. The detection limit for TNT was determined to be 12 nM. Furthermore, excimer emission of pyrene shows significantly high selectivity for TNT

A versatile plug microvalve for microfluidic applications

Most of the available microvalves include complicated fabrication steps and multiple materials. We present a microvalve which is inspired from macroplug valves. The plug microvalve is fabricated by boring a hole through a rigid cylindrical rod and inserting it through a microfluidic chip. It simply functions by rotating the rod which aligns or misaligns the valve port with the microchannel. The rod is made up of a rigid material for applying the valve to an elastic polydimethylsiloxane (PDMS) microchannel. The valve can also be used for a rigid channel by inserting the rod into an elastic tubing. Therefore, the presented microvalve can be used for both elastomeric and thermoplastic channels. The plug microvalve can be applied to a prefabricated microchannel and does not require modification of the mold design. We have verified the repeatability and robustness of the valve by repetitive operation cycles using a servo motor. The plug microvalve is adaptable to numerous microfluidic applications. We have shown three modes of operation for the microvalve including fluid flow control across multiple intersecting channels. Integrating the microvalve to some commonly used microfluidic designs, we demonstrated the versatility and the practicality of the microvalve for controlling flow focusing, microdroplet sorting and rapid chemical agent detection. This low-cost microvalve significantly minimizes the prototyping time for microfluidic systems. © 2017 Elsevier B.V

A versatile plug microvalve for microfluidic applications

GULER, MUSTAFA TAHSIN/0000-0002-0478-3183; Elbuken, Caglar/0000-0001-8359-6871WOS: 000413381400027Most of the available microvalves include complicated fabrication steps and multiple materials. We present a microvalve which is inspired from macroplug valves. The plug microvalve is fabricated by boring a hole through a rigid cylindrical rod and inserting it through a microfluidic chip. It simply functions by rotating the rod which aligns or misaligns the valve port with the microchannel. The rod is made up of a rigid material for applying the valve to an elastic polydimethylsiloxane (PDMS) microchannel. The valve can also be used for a rigid channel by inserting the rod into an elastic tubing. Therefore, the presented microvalve can be used for both elastomeric and thermoplastic channels. The plug microvalve can be applied to a prefabricated microchannel and does not require modification of the mold design. We have verified the repeatability and robustness of the valve by repetitive operation cycles using a servo motor. The plug microvalve is adaptable to numerous microfluidic applications. We have shown three modes of operation for the microvalve including fluid flow control across multiple intersecting channels. Integrating the microvalve to some commonly used microfluidic designs, we demonstrated the versatility and the practicality of the microvalve for controlling flow focusing, microdroplet sorting and rapid chemical agent detection. This low-cost microvalve significantly minimizes the prototyping time for microfluidic systems. (C) 2017 Elsevier B.V. All rights reserved.European Union FP7 Marie Curie Career Integration Grant [322019]; TUBITAK-BIDEB graduate fellowshipThis project was partially supported by European Union FP7 Marie Curie Career Integration Grant (no. 322019). P. B. is supported by TUBITAK-BIDEB graduate fellowship. The authors also thank Murat Serhatlioglu for his help on the figures, Ziya Isiksacan and Resul Saritas for critical reading of the manuscript

Formation of Pyrene Excimers in Mesoporous Ormosil Thin Films for Visual Detection of Nitro-explosives

We report the preparation of mesoporous thin films with bright pyrene excimer emission and their application in visual and rapid detection of nitroaromatic explosive vapors. The fluorescent films were produced by physically encapsulating pyrene molecules in the organically modified silica (ormosil) networks which were prepared via a facile template-free sol–gel method. Formation and stability of pyrene excimer emission were investigated in both porous and nonporous ormosil thin films. Excimer emission was significantly brighter and excimer formation ability was more stable in porous films compared to nonporous films. Rapid and selective quenching was observed in the excimer emission against vapors of nitroaromatic molecules; trinitrotoluene (TNT), dinitrotoluene (DNT), and nitrobenzene (NB). Fluorescence quenching of the films can be easily observed under UV light, enabling the naked-eye detection of nitro-explosives. Furthermore, excimer emission signal can be recovered after quenching and the films can be reused at least five times

Robust superhydrophilic patterning of superhydrophobic ormosil surfaces for high-throughput on-chip screening applications

This article describes a facile method for the preparation of two-dimensionally patterned superhydrophobic hybrid coatings with controlled wettability. Superhydrophobic coatings were deposited from nanostructured organically modified silica (ormosil) colloids that were synthesized via a simple sol-gel method. On the defined areas of the superhydrophobic ormosil coatings, stable wetted micropatterns were produced using Ultraviolet/Ozone (UV/O) treatment which modifies the surface chemistry from hydrophobic to hydrophilic without changing the surface morphology. The degree of wettability can be precisely controlled depending on the UV/O exposure duration; extremely wetted spots with water contact angle (WCA) of nearly 0° can be obtained. Furthermore, we demonstrated high-throughput biomolecular adsorption and mixing using the superhydrophilic patterns. The proposed superhydrophilic-patterned nanostructured ormosil surfaces with their simple preparation, robust and controlled wettability as well as adaptability on flexible substrates, hold great potential for biomedical and chemical on-chip analysis. © The Royal Society of Chemistry 2016

Vinylsulfide-containing polyesters and copolyesters from fatty acids: Thiol-yne monomer synthesis and thiol-ene functionalization

10.1002/macp.201400191The synthesis of a vinylsulfide-containing hydroxy acid (VSHA) from undecylenic fatty acid via thiol-yne monoaddition is described. Metal- and enzymatic-catalyzed polycondensation of VSHA is investigated to obtain functional polyesters with a view to further modification. Higher molecular weights are obtained when using enzymatic polymerization. Random copolymers are prepared by direct enzymatic copolymerization of VSHA and e-caprolactone (CL) and triblock CL-VSHA-CL copolymers are obtained by consecutive VSHA self-condensation and ring-opening polymerization. The copolymers display semicrystalline behavior and a good thermal stability with no significant weight loss below 300 °C. Thiol-ene chemistry-type crosslinking and surface functionalization are employed to open new application fields. Evidence of the successful reactions is obtained by NMR, IR, and fluorescence measurements

Contactless pulsed and continuous microdroplet release using photothermal liquid crystals

Abstract Targeted, on-demand delivery has been of interest using materials responsive to environmental stimuli. A delivery technique based on precise release of aqueous microdroplets from a liquid crystal (LC) medium with contactless stimulation is presented. A nematic LC is doped with a photothermal dye that produces heat under near IR light exposure. The heat is used to overcome the elastic strains in the LC phase, promoting the release of initially entrapped water droplets to the neighboring aqueous solution. Designing the geometry of LC-based emulsions and tuning the light intensity and position allows for manipulation of the release in two distinct modes defined as pulsated and continuous. In the pulsated mode, water droplets are released transiently from the casted water-in-LC emulsion layer based on sweeping by the moving isotropic-nematic phase boundary controlled by light. In the continuous mode, water droplets are ejected continuously from a droplet-shaped water-in-LC emulsion, due to a heating-induced internal flow controlled by light. The droplet release by contactless stimulation is used for the on-demand dosing of dopamine and its oxidizing reagent from isolated reservoirs to obtain an in situ reaction signal for a hydrogen peroxide assay. A new dual-mode release system developed with photothermal LCs holds potential in drug release, controlled mixing, and photothermal therapy