Laser-induced transient currents in CdZnTe quasi-hemispherical radiation detector

Laser-induced transient currents were measured after applying pulsed or direct-current bias to a CdZnTe quasi-hemispherical radiation detector with gold contacts. The temporal evolution of current transients was analyzed to evaluate the dynamics of the space charge formation and its spatial distribution. The observed effects were explained by a model involving hole injection from positively biased contacts. Experimental results were complemented by numerical simulations, which supported the model. This paper discusses how the detected phenomena affect the detector performance and proposes an improved detector design

Il carcinoma colo-rettale nel giovane. Fattori prognostici

Colorectal carcinoma is the third most frequently diagnosed malignant neoplasm. Usually patients affected by this neoplasia belong to VI decade of life. However approximately 2-8% of tumors arise in patients with age under 40 years. Aim of the study was to analyse the results of surgical treatment of colorectal cancer in patiets aged under forty. From January 1987 to December 2002, 46 patients under forty years with colorectal cancer underwent surgical procedure. No perioperative mortality was registered, and complicantions were evidenced in nine patients (20%). Actuarial five years survival was 33%, and overall mean survival was 53 months. Univariate and multivariate analyses identified as prognostic factors the tumor grade, Dukes' stage, nodal status, and length of symptom

Prediction of Distant Recurrence-Free Survival in Resectable Lung Adenocarcinoma.

OBJECTIVES: Optimal procedures for adjuvant treatment and post-surgical surveillance of resected non-small-cell lung cancer remain under discussion. Pathological features are the main determinant of follow-up therapy but have limited ability to identify patients at risk of recurrence. Increasingly, molecular markers are incorporated into clinical decision-making, including measures of tumor growth. The CCP score is a quantitative, molecular measure of proliferation derived from the RNA expression of 31 cell cycle genes and a component of the molecular prognostic score (mPS). The mPS score is a linear combination of CCP score and pathological stage. CCP score and mPS are independent predictors of survival in resected lung adenocarcinoma. MATERIALS AND METHODS: CCP scores were determined by RT-qPCR for 318 patients diagnosed with stage I-II lung adenocarcinoma. Association of mPS and CCP score with distant recurrence and lung-cancer specific survival was assessed in Cox proportional hazards regression models adjusted for age, gender, tumor size, pathological stage and pleural invasion. Distant recurrence-free survival and lung-cancer specific survival by mPS risk group were calculated by Kaplan-Meier survival analysis. RESULTS: CCP scores were obtained for 205 stage I and 84 stage II patients. CCP score and mPS were independent markers of distant recurrence (CCP: HR 1.62, 95%CI 1.15-2.29, p=0.0055; mPS: HR 2.22, 95%CI 1.11-4.44, p=0.023). Patients with low mPS tumors were at significantly reduced risk of distant recurrence (log-rank p=4.2×10-5). Among stage I patients, stratification by mPS identified a patient group with increased risk of distant recurrence (36%, 95%CI 28-46%, log-rank p=0.0011) CONCLUSIONS: The molecular prognostic score stratifies early-stage, resected lung cancer patients for risk of distant recurrence and could be useful to inform treatment and surveillance decisions

Neuroprotection in a Novel Mouse Model of Multiple Sclerosis

The authors acknowledge the support of the Barts and the London Charity, the Multiple Sclerosis Society of Great Britain and Northern Ireland, the National Multiple Sclerosis Society, USA, notably the National Centre for the Replacement, Refinement & Reduction of Animals in Research, and the Wellcome Trust (grant no. 092539 to ZA). The siRNA was provided by Quark Pharmaceuticals. The funders and Quark Pharmaceuticals had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript

Italo-Mycenaean and other Aegean-influenced pottery in Late Bronze Age Italy: the case for regional production

Decorated Italo-Mycenaean (IM) pottery, a high-status class found and made over three centuries from the Italian Late Middle Bronze Age onwards, was the subject of a large archaeological and archaeometric enquiry published by the present authors in 2014. The present paper focuses on identifying IM’s centres of production. The results of chemical analysis of IM using mainly ICP-ES make a strong case for regional production, irrespective of findspots in several parts of Italy. This accords well with the relative stylistic individuality of IM observed among the finds of IM across many parts of Italy, suggesting that IM is a powerful archaeological indicator of the way local communities were constructing and negotiating their identities at this crucial time of social and economic change at the end of the Bronze Age. A picture of more dispersed intra-regional production emerges from the combined chemical and petrographic analysis of two other pottery classes displaying Aegean influence: wheel-made Grey ware and decorated Final Bronze Age/Early Iron Age (FBA/EIA) pottery from sites in present-day Apulia and from Broglio di Trebisacce in Calabria. Potters manufacturing the former applied their knowledge of the wheel and kiln firing to handmade impasto shapes which were largely shared by local communities within a region. The results obtained for the latter reflect demands of the new elites of the emerging FBA/EIA in southern Italy to create symbols expressing a new cultural identity: this pottery’s style, especially of Protogeometric, was uniform but its production was localised

Potentialities of High-Resolution 3-D CZT Drift Strip Detectors for Prompt Gamma-Ray Measurements in BNCT

Recently, new high-resolution cadmium–zinc–telluride (CZT) drift strip detectors for room temperature gamma-ray spectroscopic imaging were developed by our group. The CZT detectors equipped with orthogonal anode/cathode collecting strips, drift strips and dedicated pulse processing allow a detection area of 6 × 20 mm2 and excellent room temperature spectroscopic performance (0.82% FWHM at 661.7 keV). In this work, we investigated the potentialities of these detectors for prompt gamma-ray spectroscopy (PGS) in boron neutron capture therapy (BNCT). The detectors, exploiting the measurement of the 478 keV prompt gamma rays emitted by 94%7Li nuclides from the10B(n, α)7Li reaction, are very appealing for the development of single-photon emission computed tomography (SPECT) systems and Compton cameras in BNCT. High-resolution gamma-ray spectra from10B samples under thermal neutrons were measured at the T.R.I.G.A. Mark II research nuclear reactor of the University of Pavia (Italy)

Quantum Statistics of Surface Plasmon Polaritons in Metallic Stripe Waveguides

Single surface plasmon polaritons are excited using photons generated via spontaneous parametric down-conversion. The mean excitation rates, intensity correlations and Fock state populations are studied. The observed dependence of the second order coherence in our experiment is consistent with a linear uncorrelated Markovian environment in the quantum regime. Our results provide important information about the effect of loss for assessing the potential of plasmonic waveguides for future nanophotonic circuitry in the quantum regime.Comment: 21 pages, 6 figures, published in Nano Letters, publication date (web): March 27 (2012

Recent advances in the development of high-resolution 3D cadmium zinc telluride drift strip detectors

In the last two decades, great efforts have been made in the development of 3D cadmium-zinc-Telluride (CZT) detectors operating at room temperature for gamma-ray spectroscopic imaging. This work presents the spectroscopic performance of new high-resolution CZT drift strip detectors, recently developed at IMEM-CNR of Parma (Italy) in collaboration with due2lab (Italy). The detectors (19.4 mm × 19.4 mm × 6 mm) are organized into collecting anode strips (pitch of 1.6 mm) and drift strips (pitch of 0.4 mm) which are negatively biased to optimize electron charge collection. The cathode is divided into strips orthogonal to the anode strips with a pitch of 2 mm. Dedicated pulse processing analysis was performed on a wide range of collected and induced charge pulse shapes using custom 32-channel digital readout electronics. Excellent room-Temperature energy resolution (1.3% FWHM at 662 keV) was achieved using the detectors without any spectral corrections. Further improvements (0.8% FWHM at 662 keV) were also obtained through a novel correction technique based on the analysis of collected-induced charge pulses from anode and drift strips. These activities are in the framework of two Italian research projects on the development of spectroscopic gamma-ray imagers (10-1000 keV) for astrophysical and medical applications

Extending scientific computing system with structural quantum programming capabilities

We present a basic high-level structures used for developing quantum programming languages. The presented structures are commonly used in many existing quantum programming languages and we use quantum pseudo-code based on QCL quantum programming language to describe them. We also present the implementation of introduced structures in GNU Octave language for scientific computing. Procedures used in the implementation are available as a package quantum-octave, providing a library of functions, which facilitates the simulation of quantum computing. This package allows also to incorporate high-level programming concepts into the simulation in GNU Octave and Matlab. As such it connects features unique for high-level quantum programming languages, with the full palette of efficient computational routines commonly available in modern scientific computing systems. To present the major features of the described package we provide the implementation of selected quantum algorithms. We also show how quantum errors can be taken into account during the simulation of quantum algorithms using quantum-octave package. This is possible thanks to the ability to operate on density matrices

Cross-polarized photon-pair generation and bi-chromatically pumped optical parametric oscillation on a chip

Nonlinear optical processes are one of the most important tools in modern optics with a broad spectrum of applications in, for example, frequency conversion, spectroscopy, signal processing and quantum optics. For practical and ultimately widespread implementation, on-chip devices compatible with electronic integrated circuit technology offer great advantages in terms of low cost, small footprint, high performance and low energy consumption. While many on-chip key components have been realized, to date polarization has not been fully exploited as a degree of freedom for integrated nonlinear devices. In particular, frequency conversion based on orthogonally polarized beams has not yet been demonstrated on chip. Here we show frequency mixing between orthogonal polarization modes in a compact integrated microring resonator and demonstrate a bi-chromatically pumped optical parametric oscillator. Operating the device above and below threshold, we directly generate orthogonally polarized beams, as well as photon pairs, respectively, that can find applications, for example, in optical communication and quantum optics