19 research outputs found
Experimental-based energy performance evaluation of low-cost retrofit strategy for aging low-rise residential building for carbon neutrality
The CO2 reduction policy has driven the remodeling policy to reduce the energy consumption of buildings, which can be implemented by insulating and replacing windows to reduce the energy consumption of buildings. However, due to energy poverty, many residents have limited opportunities for these projects. Therefore, economically accessible technologies were evaluated in this study. Specifically, practical technologies were applied and evaluated in practice, and a survey of 107 households was conducted to analyze the behavior of energy consumption behavior in the residential areas with buildings. The airtight performance of the window was improved by approximately 15% without replacing it, and energy consumption was reduced by 25%. In the case of electric energy consumption, the use of high-efficiency lighting showed the most direct reduction. However, the introduction of renewable energy into buildings that are not insulated can contribute to relative climate-dependent reductions, but whether direct reductions are possible needs to be examined more closely. Relatively inexpensive technologies have improved insulation performance and have a shorter payback period compared to window replacement, further solidifying economic feasibility
Simulation analysis of Macro-Packed Phase Change Materials (MPPCM) to reduce building energy use
Manufacture of optimized PCM within thermal comfort range to improve building energy performance
Smart heat storage building material development with Loess and SSPCM for building energy saving
Dynamic heat transfer analysis on hwangtoh with PCM/eco-material for improving thermal inertia
Simulation-based analysis of optimized PCM to improve building energy performance and indoor thermal environment
CO2 Reforming of CH4 Using Coke Oven Gas over Ni/MgO-Al2O3 Catalysts: Effect of the MgO:Al2O3 Ratio
Research is being actively conducted to improve the carbon deposition and sintering resistance of Ni-based catalysts. Among them, the Al2O3-supported Ni catalyst has been broadly studied for the dry reforming reaction due to its high CH4 activity at the beginning of the reaction. However, there is a problem of deactivation due to carbon deposition of Ni/Al2O3 catalyst and sintering of Ni, which is a catalytically active material. Supplementing MgO in Ni/Al2O3 catalyst can result in an improved MgAl2O4 spinel structure and basicity, which can be helpful for the activation of methane and carbon dioxide molecules. In order to confirm the optimal supports’ ratio in Ni/MgO-Al2O3 catalysts, the catalysts were prepared by supporting Ni after controlling the MgO:Al2O3 ratio stepwise, and the prepared catalysts were used for CO2 reforming of CH4 (CDR) using coke oven gas (COG). The catalytic reaction was conducted at 800 °C and at a high gas hourly space velocity (GHSV = 1,500,000 h−1) to screen the catalytic performance. The Ni/MgO-Al2O3 (MgO:Al2O3 = 3:7) catalyst showed the best catalytic performance between prepared catalysts. From this study, the ratio of MgO:Al2O3 was confirmed to affect not only the basicity of the catalyst but also the dispersion of the catalyst and the reducing property of the catalyst surface
CO<sub>2</sub> Reforming of CH<sub>4</sub> Using Coke Oven Gas over Ni/MgO-Al<sub>2</sub>O<sub>3</sub> Catalysts: Effect of the MgO:Al<sub>2</sub>O<sub>3</sub> Ratio
Research is being actively conducted to improve the carbon deposition and sintering resistance of Ni-based catalysts. Among them, the Al2O3-supported Ni catalyst has been broadly studied for the dry reforming reaction due to its high CH4 activity at the beginning of the reaction. However, there is a problem of deactivation due to carbon deposition of Ni/Al2O3 catalyst and sintering of Ni, which is a catalytically active material. Supplementing MgO in Ni/Al2O3 catalyst can result in an improved MgAl2O4 spinel structure and basicity, which can be helpful for the activation of methane and carbon dioxide molecules. In order to confirm the optimal supports’ ratio in Ni/MgO-Al2O3 catalysts, the catalysts were prepared by supporting Ni after controlling the MgO:Al2O3 ratio stepwise, and the prepared catalysts were used for CO2 reforming of CH4 (CDR) using coke oven gas (COG). The catalytic reaction was conducted at 800 °C and at a high gas hourly space velocity (GHSV = 1,500,000 h−1) to screen the catalytic performance. The Ni/MgO-Al2O3 (MgO:Al2O3 = 3:7) catalyst showed the best catalytic performance between prepared catalysts. From this study, the ratio of MgO:Al2O3 was confirmed to affect not only the basicity of the catalyst but also the dispersion of the catalyst and the reducing property of the catalyst surface