Correlation effects during liquid infiltration into hydrophobic nanoporous mediums

Correlation effects arising during liquid infiltration into hydrophobic porous medium are considered. On the basis of these effects a mechanism of energy absorption at filling porous medium by nonwetting liquid is suggested. In accordance with this mechanism, the absorption of mechanical energy is a result expenditure of energy for the formation of menisci in the pores on the shell of the infinite cluster and expenditure of energy for the formation of liquid-porous medium interface in the pores belonging to the infinite cluster of filled pores. It was found that in dependences on the porosity and, consequently, in dependences on the number of filled pores neighbors, the thermal effect of filling can be either positive or negative and the cycle of infiltration-defiltration can be closed with full outflow of liquid. It can occur under certain relation between percolation properties of porous medium and the energy characteristics of the liquid-porous medium interface and the liquid-gas interface. It is shown that a consecutive account of these correlation effects and percolation properties of the pores space during infiltration allow to describe all experimental data under discussion

Unfolding of differential energy spectra in the MAGIC experiment

The paper describes the different methods, used in the MAGIC experiment, to unfold experimental energy distributions of cosmic ray particles (gamma-rays). Questions and problems related to the unfolding are discussed. Various procedures are proposed which can help to make the unfolding robust and reliable. The different methods and procedures are implemented in the MAGIC software and are used in most of the analyses.Comment: Submitted to NIM

The Formation and Decay of an Unstable State of a Suspension of Hydrophobic Nanoporous Particles under Rapid Compression

The study of non-wetting liquid transport in a nanoporous medium is stimulated by the possible use of this process to absorb or accumulate mechanical energy. The filling of nanopores of suspended particles with a non-wetting liquid under decay of the unstable state, when the pressure increase rate is much higher than the rate of volume change, is studied. Based on the new experimental data and a theoretical model of the interacting modes of the spontaneous filling and filling under rapid compression, a picture of the percolation transition and a mechanism of liquid transport under such conditions are proposed. It is shown that a new dynamic filling threshold P0 is reached. It is shown that the filling of the porous medium is the result of the slow mode of impact compression when the fast mode of spontaneous filling is continuously adjusted to the slow mode on a small time scale. The theoretical model of the interacting modes is based on the solving of a system of kinetic equations for the distribution functions f(n,t) and F(n,t) clusters of filled pores under rapid compression, respectively. It is shown that filling at P=const corresponds to the non-dissipative transport of liquid on a time scale smaller than the characteristic filling time. The proposed model quantitatively describes the experimental data. So, the response of suspension to impact is characterized by the positive feedback

Percolation Effects in Mixed Matrix Membranes with Embedded Carbon Nanotubes

Polymeric membranes with embedded nanoparticles, e.g., nanotubes, show a significant increase in permeability of the target component while maintaining selectivity. However, the question of the reasons for this behavior of the composite membrane has not been unequivocally answered to date. In the present work, based on experimental data on the permeability of polymer membranes based on Poly(vinyl trimethylsilane) (PVTMS) with embedded CNTs, an approach to explain the abnormal behavior of such composite membranes is proposed. The presented model considered the mass transfer of gases and liquids through polymeric membranes with embedded CNTs as a parallel transport of gases through the polymeric matrix and a “percolation” cluster—bound regions around the embedded CNTs. The proposed algorithm for modeling parameters of a percolation cluster of embedded tubular particles takes into account an agglomeration and makes it possible to describe the threshold increase and subsequent decrease permeability with increasing concentration of embedded particles. The numerical simulation of such structures showed: an increase in the particle length leads to a decrease in the percolation concentration in a matrix of finite size, the power of the percolation cluster decreases significantly, but the combination of these effects leads to a decrease in the influence of the introduced particles on the properties of the matrix in the vicinity of the percolation threshold; an increase in the concentration of embedded particles leads to an increase in the probability of the formation of agglomerates and the characteristic size of the elements that make up the percolation cluster, the influence of individual particles decreases and the characteristics of the percolation transition determine the ratio of the sizes of agglomerates and matrix; and an increase in the lateral linear dimensions of the matrix leads to a nonlinear decrease in the proportion of the matrix, which is affected by the introduced particles, and the transport characteristics of such MMMs deteriorate

Multiplicity of metastable nonergodic states of a dispersed nonwetting liquid in a disordered nanoporous medium

Three different metastable nonergodic states of a dispersed nonwetting liquid (water) in the Fluka 100 C8 and Fluka 100 C18 disordered porous media, as well as transitions between these states under variation of the temperature and the degree of filling, have been qualitatively described. It has been shown that the appearance of such states is due to spatial variations of the number of the nearest neighbors because of the broadening of the pore size distribution function f(R), fluctuations of various local configurations of neighbors in the system of pores, and fluctuations of a configuration of a pore and its environment consisting of filled and empty pores on a percolation cluster. These states and transitions are caused by the competition between the effective repulsion of the nonwetting liquid from the wall of the pore, which is responsible for the “extrusion” of the liquid from the pore, and the effective collective multiparticle attraction of the liquid cluster in the pore to clusters in the neighboring connected pores. The theoretical dependences obtained make it possible to qualitatively describe experimental data

Interphase Surface Stability in Liquid-Liquid Membrane Contactors Based on Track-Etched Membranes

A promising solution for the implementation of extraction processes is liquid–liquid membrane contactors. The transfer of the target component from one immiscible liquid to another is carried out inside membrane pores. For the first time, highly asymmetric track-etched membranes made of polyethylene terephthalate (PET) of the same thickness but with different pore diameters (12.5–19 nm on one side and hundreds of nanometers on the other side) were studied in the liquid–liquid membrane contactor. For analysis of the liquid–liquid interface stability, two systems widely diverging in the interfacial tension value were used: water–pentanol and water–hexadecane. The interface stability was investigated depending on the following process parameters: the porous structure, the location of the asymmetric membrane in the contactor, the velocities of liquids, and the pressure drop between them. It was shown that the stability of the interface increases with decreasing pore size. Furthermore, it is preferable to supply the aqueous phase from the side of the asymmetric membrane with the larger pore size. The asymmetry of the porous structure of the membrane makes it possible to increase the range of pressure drop values between the phases by at least two times (from 5 to 10 kPa), which does not lead to mutual dispersion of the liquids. The liquid–liquid contactor based on the asymmetric track-etched membranes allows for the extraction of impurities from the organic phase into the aqueous phase by using a 1% solution of acetone in hexadecane as an example