A high degree of direct torque control applied to a grid-connected wind energy system based on a DFIG

This paper presents the performances improvement of a doubly fed induction generator (DFIG) driven by a wind turbine (WT) using direct torque control (DTC). However, the major drawbacks related to DTC are high torque/flux ripples that produce mechanical vibration and disagreeable noise. The use of multilevel inverters seems to be an interesting solution. A three-level voltage source (inverter) converter (3LVSI) connected to the rotor side of the DFIG is considered in this paper. The high freedom degree of the voltage vectors selection in the 3LVSI allows a control with minimal torque and flux ripples. In addition, a fuzzy logic approach is introduced, to ensure an intelligent extraction of the energy sweeping the WT blades. A variable adjustment step enables an optimal extraction in a minimum tracking time with significant reduction of oscillations in the steady state. Simulation results obtained using MATLAB/SIMULINK demonstrate the effectiveness of the 3LVSI-DTC control based on Fuzzy MPPT in the wind energy conversion system (WECS)

Performance Improvement of Hybrid System Based DFIG-Wind/PV/Batteries Connected To DC And AC Grid By Applying Intelligent Control

One of the main causes of CO2 emissions is the production of electrical energy. Therefore, many researchers goal’s is to develop renewable power systems. This paper proposes a new intelligent control development of hybrid PV–Wind-Batteries. Neuro-Fuzzy Direct Power Control (NF-DPC) is invested in order to enhance system performance and generated currents quality. An improved MPPT algorithm based on Fuzzy Controller (FC) is invested for PV power optimization. In addition, a new Modified Fuzzy Direct Power Control (MF-DPC) is developed and applied to the grid side converter to control the active and reactive power by monitoring the involved active power flow and providing a unit power factor by imposing a zero reactive power. An Energy Management Algorithm (EMA) is developed to maintain energy balance, meet the DC load demand, mitigate fluctuations caused by weather condition variations (wind speed and solar irradiance), and minimize battery overcharge and deep discharge. To test the proposed hybrid microgrid system operation, the different parts of the system are modeled, the wind turbine associated to the DFIG, the photovoltaic system as well as the battery storage system. Furthermore, the associated power converters with their control strategies are also presented. Global system simulation, using MATLAB/Simulink, is carried out to validate the effectiveness of both EMA and control techniques. The obtained results show significant reduction of active/reactive power ripples and THD by about 64%, 72%, and 50%, respectively. The EMA ability to manage the energy flow, produced and requested by the load. The THD rate of all injected currents is less than 4%, meaning that the proposed controls will increase the used equipments’ life span, minimize their maintenance and then reduce the hybrid power system cost

Advanced Fuzzy 12 DTC Control of Doubly Fed Induction Generator for Optimal Power Extraction in Wind Turbine System under Random Wind Conditions

A wind turbine (WT)-based doubly fed induction generator (DFIG) is the most often used generator in the wind conversion system market due to its advantages such as the ability of operating under variable wind speed and its high performance. However, nonlinear dynamical and parameter uncertainties of the DFIG make the controller design of this kind of system a challenging work. Thus, in this study, a novel control strategy was proposed to design the desired system dynamics, to highlight the efficacy of the proposed system, and to improve the performance of the closed-loop system. The proposed controller combines the twelve-sector direct torque control (12-DTC) and the fuzzy controller with modified rules to solve the limitations and shortcomings of the usual methods for the WT-DFIG system. All operation modes, successively and continually, were considered to reflect the true operation of WT-DFIG system subject to random wind speeds. The aims of this work was to ensure an optimal operation of the wind generator, extracting maximum power in the zone II of the WT characteristic, and limiting this power in its maximum value in the case (zone III), to transmit the power generated by the DFIG to the grid-side with minimum losses in the disturbances related to DFIG. Extensive numerical simulations were performed under MATALB/Simulink, where the proposed fuzzy twelve direct torque control (F12-DTC) was compared with conventional nonlinear controls: conventional DTC (C-DTC) and 12-DTC. The simulation results demonstrated clearly that the proposed one had the highest performance and robustness, with a significant reduction in rotor flux and electromagnetic torque ripples and better-generated power quality with low currents’ THD over the conventional strategies (C-DTC and 12-DTC)