State-of-the-art in aerodynamic shape optimisation methods

Aerodynamic optimisation has become an indispensable component for any aerodynamic design over the past 60 years, with applications to aircraft, cars, trains, bridges, wind turbines, internal pipe flows, and cavities, among others, and is thus relevant in many facets of technology. With advancements in computational power, automated design optimisation procedures have become more competent, however, there is an ambiguity and bias throughout the literature with regards to relative performance of optimisation architectures and employed algorithms. This paper provides a well-balanced critical review of the dominant optimisation approaches that have been integrated with aerodynamic theory for the purpose of shape optimisation. A total of 229 papers, published in more than 120 journals and conference proceedings, have been classified into 6 different optimisation algorithm approaches. The material cited includes some of the most well-established authors and publications in the field of aerodynamic optimisation. This paper aims to eliminate bias toward certain algorithms by analysing the limitations, drawbacks, and the benefits of the most utilised optimisation approaches. This review provides comprehensive but straightforward insight for non-specialists and reference detailing the current state for specialist practitioners

Semi-span wind tunnel testing without conventional peniche

Low-speed wind tunnel tests of a flexible wing semi-span model have been implemented in the 9×79×7 ft de Havilland wind tunnel at the University of Glasgow. The main objective of this investigation is to quantify the effect of removing the traditional peniche boundary layer spacer utilised in this type of testing. Removal of the peniche results in a stand-off gap between the wind tunnel wall and the model’s symmetry plane. This offers the advantage of preventing the development of a horseshoe vortex in front of the model, at the peniche/wall juncture. The formation of the horseshoe vortex is known to influence the flow structures around the entire model and thus alters the model’s aerodynamic behaviours. To determine the influence of the stand-off gap, several gap heights have been tested for a range of angles of attack at Re=1.5×106Re=1.5×106 , based on the wing mean aerodynamic chord (MAC). Force platform data have been used to evaluate aerodynamic coefficients, and how they vary with stand-off heights. Stereoscopic Particle Imaging Velocimetry (sPIV) was used to examine the interaction between the tunnel boundary layer and model’s respective stand-off gap. In addition, clay and tuft surface visualisation enhanced the understanding of how local flow structures over the length of the fuselage vary with stand-off height and angle of attack. The presented results show that a stand-off gap of four-to-five times the displacement thickness of the tunnel wall boundary layer is capable of achieving a flow field around the model fuselage that is representative of what would be expected for an equivalent full-span model in free-air—this cannot be achieved with the application of a peniche

Pseudo-shock waves and their interactions in high-speed intakes

In an air-breathing engine the flow deceleration from supersonic to subsonic conditions takes places inside the isolator through a gradual compression consisting of a series of shock waves. The wave system, referred to as a pseudo-shock wave or shock train, establishes the combustion chamber entrance conditions, and therefore influences the performance of the entire propulsion system. The characteristics of the pseudo-shock depend on a number of variables which make this flow phenomenon particularly challenging to be analysed. Difficulties in experimentally obtaining accurate flow quantities at high speeds and discrepancies of numerical approaches with measured data have been readily reported. Understanding the flow physics in the presence of the interaction of numerous shock waves with the boundary layer in internal flows is essential to developing methods and control strategies. To counteract the negative effects of shock wave/boundary layer interactions, which are responsible for the engine unstart process, multiple flow control methodologies have been proposed. Improved analytical models, advanced experimental methodologies and numerical simulations have allowed a more in-depth analysis of the flow physics. The present paper aims to bring together the main results, on the shock train structure and its associated phenomena inside isolators, studied using the aforementioned tools. Several promising flow control techniques that have more recently been applied to manipulate the shock wave/boundary layer interaction are also examined in this review

Experimental investigation on shock wave diffraction over sharp and curved splitters

Shock wave diffraction occurs when a normal travelling wave passes through a sudden area expansion. Turbulent, compressible, and vortical are the characterising adjectives that describe the flow features, which are slowly smeared out due to the dissipative nature of turbulence. The study of this phenomenon provides insight into several flow structures such as shear layer formation, vortex development, and vortex/shock interaction whose applications include noise control, propulsion or wing aerodynamics. A large amount of research has been carried out in the analysis of shock wave diffraction mainly around sharp wedges, but only few studies have considered rounded corners. This project has the aim to examine and compare the flow features which develop around three different geometries, ramp, symmetric and rounded, with experimental incident shock Mach numbers of 1.31 and 1.59, and Reynolds numbers of 1.08×106 and 1.68×106. Schlieren photography is used to obtain qualitative information about the evolution of the flow field. The results show that ramp and symmetrical wedges with a tip angle of 172° behave in the same manner, which exhibit clear dissimilarities with a curved corner. The flow field evolves more rapidly for a higher incoming Mach number which is also responsible for the development of stronger structures

Experimental Study of Low-Speed Cavity Flow Using Steady Jets

Open cavity ሺܮ/ܦ = 4ሻ was examined at low speed ሺܷஶ = 26 ݉/ݏሻ. The baseline flow showed a typical open cavity flow. It was also found that a region of relatively high velocity fluctuations (indicated by RMS values) extends along the cavity separated shear layer from the mid of the cavity to the cavity’s trailing edge. Steady jets at an outlet velocity of 1.8 m/s was forced through a narrow slot at the leading edge. The jets modified the profile shape of the averaged ܷ velocity for the shear layer at the close proximity of the leading edge. However, the jet increased the fluctuation in the separated shear layer

Compressible vortex loops: effect of nozzle geometry

Vortex loops are fundamental building blocks of supersonic free jets. Isolating them allows for an easier study and better understanding of such flows. The present study looks at the behaviour of compressible vortex loops of different shapes, generated due to the diffraction of a shock wave from a shock tube with different exit nozzle geometries. These include a 15 mm diameter circular nozzle, two elliptical nozzles with minor to major axis ratios of 0.4 and 0.6, a 30 × 30 mm square nozzle, and finally two exotic nozzles resembling a pair of lips with minor to major axis ratios of 0.2 and 0.5. The experiments were performed for diaphragm pressure ratios of P4/P1=4, 8, and 12, with P4 and P1 being the pressures within the high pressure and low pressure compartments of the shock tube, respectively. High-speed schlieren photography as well as PIV measurements of both stream-wise and head-on flows have been conducted

Application of pressure-sensitive paints to unsteady and high-speed flows

The Pressure-Sensitive Paint (PSP) technique allows the global pressure mapping of surfaces under aerodynamic conditions. The present study involves the application of Tris- Bathophenanthroline Ruthenium Perchlorate based PSP, developed in-house, to two different cases; a) the flow through a sonic nozzle, and b) the examination of the effect of dimples on glancing shock wave turbulent boundary layer interactions at transonic speeds

Detonation driven shock wave interactions with perforated plates

The study of detonations and their interactions is vital for the understanding of the high-speed flow physics involved and the ultimate goal of controlling their detrimental effects. However, producing safe and repeatable detonations within the laboratory can be quite challenging, leading to the use of computational studies which ultimately require experimental data for their validation. The objective of this study is to examine the induced flow field from the interaction of a shock front and accompanying products of combustion, produced from the detonation taking place within a non-electrical tube lined with explosive material, with porous plates with varying porosities, 0.7–9.7%. State of the art high-speed schlieren photography alongside high-resolution pressure measurements is used to visualise the induced flow field and examine the attenuation effects which occur at different porosities. The detonation tube is placed at different distances from the plates' surface, 0–30 mm, and the pressure at the rear of the plate is recorded and compared. The results indicate that depending on the level of porosity and the Mach number of the precursor shock front secondary reflected and transmitted shock waves are formed through the coalescence of compression waves. With reduced porosity, the plates act almost as a solid surface, therefore the shock propagates faster along its surface

Compressible flow structures interaction with a two-dimensional ejector: a cold-flow study

An experimental study has been conducted to examine the interaction of compressible flow structures such as shocks and vortices with a two-dimensional ejector geometry using a shock-tube facility. Three diaphragm pressure ratios ofP4 =P1 = 4, 8, and 12 have been employed, whereP4 is the driver gas pressure andP1 is the pressure within the driven compartment of the shock tube. These lead to incident shock Mach numbers of Ms = 1:34, 1.54, and 1.66, respectively. The length of the driver section of the shock tube was 700 mm. Air was used for both the driver and driven gases. High-speed shadowgraphy was employed to visualize the induced flowfield. Pressure measurements were taken at different locations along the test section to study theflow quantitatively. The induced flow is unsteady and dependent on the degree of compressibility of the initial shock wave generated by the rupture of the diaphragm

Control of Cavity-Induced Drag Using Steady Jets

Separated shear layer oscillations in open cavities can induce drag, noise and vibration. This issue has many aerospace applications such as Landing gears and control surfaces [1]. Recently, phase-cancellation [1] and offinstability frequency excitation [2] & [3] approaches have been incorporated in different open-loop and feedback control systems. Despite the high control performance of these systems, further enhancement is still possible. In this study, steady jets, as shown in fig. 1, are forced through 2mm, two-dimensional slots at the leading and trailing edges of the cavity. In order to study the performance of this novel approach, different cases will be examined, including: jet combination (blowing from cavity leading edge, suction from cavity leading edge and blowing-suction), jet angle (parallel or deflected jet) and jet-to-free stream velocity factor /.