Characterization of the Mass-Transport Phenomena in a Superconcentrated LiTFSI:Acetonitrile Electrolyte

Superconcentration of aprotic electrolytes has recently emerged as a way to stabilize solvents that otherwise would be impossible to use, in e.g. lithium-ion batteries (LIBs). As demanding applications, such as hybrid electric vehicles and fast charging, become increasingly important, battery manufacturers are struggling to find a suitable electrolyte able to deliver high power with low polarization. Electrolyte characterizations able to accurately predict the high-power performance of such electrolytes are also of utmost importance. This study reports a full.characterization of the mass-transport phenomena for a superconcentrated LiTFSL-acetonitrile electrolyte in concentrations ranging from 2.7 M to 4.2 M. The method obtains the ionic conductivity, cationic transport number, diffusion coefficient, and the thermodynamic enhancement factor, by combining mathematical modeling and three electrochemical experiments. Furthermore, the density and the viscosity were measured. The transport number with respect to the room is found to be very high compared to other liquid LIB electrolytes, but a low diffusion coefficient lowers overall performance. The ionic conductivity decreases quickly with concentration, dropping from 12.7 mS/cm at 2.7 M to 0.76 mS/cm at 4.2 M. Considering all the effects in terms of the mass-transport of the electrolyte, the lower end of the studied concentration range is favorable

Model-Based Lithium-Ion Battery Resistance Estimation From Electric Vehicle Operating Data

State-of-health estimates of batteries are essential for onboard electric vehicles in order to provide safe, reliable, and cost-effective battery operation. This paper suggests a method to estimate the 10-s discharge resistance, which is an established battery figure of merit from laboratory testing, without performing the laboratory test. Instead, a state-of-health estimate of batteries is obtained using data directly from their operational use, e.g., onboard electric vehicles. It is shown that simple dynamical battery models, based on a current input and a voltage output, with model parameters dependent on temperature and state of charge, can be derived using AutoRegressive with eXogenous input models, whose order can be adjusted to describe the complex battery behavior. Then, the 10-s discharge resistance can be conveniently computed from the identified model parameters. Moreover, the uncertainty of the estimated resistance values is provided by the method. The suggested method is validated with usage data from emulated electric vehicle operation of an automotive lithium-ion battery cell. The resistance values are estimated accurately for a state-of-charge and temperature range spanning typical electric vehicle operating conditions. The identification of the model parameters and the resistance computation are very fast, rendering the method suitable for onboard application

The effect of O2 concentration on the reaction mechanism in Li-O2 batteries

The promising lithium-oxygen battery chemistry presents a set of challenges that need to be solved if commercialization is ever to be realized. This study focuses on how the O2 reaction path is effected by the O2 concentration in the electrolyte. An electrochemical quartz crystal microbalance system was used to measure current, potential, and change in electrode mass simultaneously. It is concluded that the mass reversibility is O2 concentration dependent while the coulombic efficiency is not. The mass reversibility is higher at low O2 concentration meaning that more of the deposited Li2O2 is removed during oxidation in relation to the amount deposited during reduction. The first step of the reduction is the formation of soluble LiO2, which is then either reacting further at the electrode or being transported away from the electrode resulting in low current efficiency and low deposited mass per electrons transferred. During the oxidation, the first step involves de-lithiation of Li2O2 at low potential followed by bulk oxidation. The oxidation behavior is O2 concentration dependent, and this dependence is likely indirect as the O2 concentration effects the amount of discharge product formed during the reduction. The O2 concentration at different saturation pressures was determined using a mass spectrometer. It was found that the electrolyte follows Henry\u27s law at the pressures used in the study. In conclusion, this study provides insight to the O2 concentration dependence and the preferred path of the O2 electrochemical reactions in lithium-oxygen batteries

Energy storage activities in the swedish hybrid vehicle centre

Significant efforts are put worldwide on developing new concepts for vehicle propulsion with the hybrid electric vehicle (HEV) being a prominent example. Hybrid technology is clearly a strategic future activity for automotive industries and in response to the rapid development in the area; the Swedish Hybrid Vehicle Centre (SHC) was formed in 2007 to join forces between Swedish industry and academia in the field. The centre emphasizes a holistic view to meet the environmental and societal needs with new technological solutions. The research within SHC is currently divided into three different themes where of we here describe the Energy Storage theme with emphasis on the activities carried out at the involved universities in the current main project areas: Cell Properties, Electrode Materials and Electrolyte Additives. Examples are given on how these projects attacks the problems at hand separately, but also how we create synergy effects between the projects. As an example cell modelling is performed given a specific chemistry and cycling scheme, the same parameters are used for electrochemical experiments which provide macroscopic data that are connected with molecular level actions in the electrodes, the electrolyte, and the interfaces. All this is done using our base-line chemistry and a subsequent route is to investigate the role of different additives to overcome the limitations that are observed

Energy storage activities in the Swedish hybrid vehicle centre

Significant efforts are put worldwide on developing new concepts for vehicle propulsion with the hybrid electric vehicle (HEV) being a prominent example. Hybrid technology is clearly a strategic future activity for automotive industries and in response to the rapid development in the area; the Swedish Hybrid Vehicle Centre (SHC) was formed in 2007 to join forces between Swedish industry and academia in the field. The centre emphasizes a holistic view to meet the environmental and societal needs with new technological solutions. The research within SHC is currently divided into three different themes whereof we here describe the Energy Storage theme with emphasis on the activities carried out at the involved universities in the current main project areas: Cell Properties, Electrode Materials and Electrolyte Additives. Examples are given on how these projects attacks the problems at hand separately, but also how we create synergy effects between the projects. As an example cell modelling is performed given a specific chemistry and cycling scheme, the same parameters are used for electrochemical experiments which provide macroscopic data that are connected with molecular level actions in the electrodes, the electrolyte, and the interfaces. All this is done using our base-line chemistry and a subsequent route is to investigate the role of different additives to overcome the limitations that are observed