40 research outputs found

    Fill Materials at Integral End Bents

    Get PDF
    Jointless bridge designs have become increasingly popular due to their low construction and maintenance costs. But this design carries risks. Most notably, integral end bents can be displaced and undergo settlement due to soil movement in embankments and loads carried by the superstructure. In response, the Kentucky Transportation Cabinet (KYTC) devised a novel treatment for end bent and abutment backfills on low- and middle-span concrete bridges in which elasticized geofoam is placed between geosynthetically confined soil and an integral end bent (GCS-IEB). However, this design requires modification where the elasticized geofoam and overlying pavement meet. Using elasticized geofoam is also costly. In response, this study identifies less expensive substitutes for elasticized geofoam that would not be damaged by bridge movements and which would reduce the settlement of integral end bents. Two promising materials were evaluated whose properties are similar to elasticized geofoam but which cost significantly less — shredded tire chips and recycled tire granules. Using a new lab procedure, researchers evaluated the recoverable deformation and maximum resistant stress of different samples, ultimately identifying a recycled tire derivative that is the best low-cost alternative to elasticized geofoam. Step-by-step installation methods are provided to guide the onsite installation of alternative materials. One method applies to recycled tire derivatives delivered in bags, while the other applies to materials that delivered in bulk and placed into baskets onsite

    Stabilization of Subgrade Soil using Hydrated Lime Product

    Get PDF
    The Carbide/Graphite Group Inc. requested the University of Kentucky, Kentucky Transportation Center to do a feasibility study to determine if a hydrated lime product produced at their Calvet City, Kentucky facility can be used as a soil subgrade stabilizing agent

    Embankment Construction Using Shale

    Get PDF
    Shales have been used extensively in the construction of highway embankments, and other earthen structures, because of the vast amounts of these materials located in many areas of the country and the lack of economical and alternate available materials. Because shales exhibit a wide range of engineering properties and behaviors, many problems have occurred. Numerous shale embankment failures have occurred generally some 1 to 10 years after construction. Settlements of 1 to 3 feet (0.3 - 0.9 m) have been observed in many old embankments and required numerous asphaltic overlays. Shale embankments that settle continuously have been observed to fail eventually. Each year millions of dollars are spent repairing embankments built with shales. This report presents a discussion of some of the research conducted by the University of Kentucky Transportation Center in the seventies and eighties and attempts to address some of the problems that arise in constructing shale embankments. A brief overview of the engineering properties of shales located in Kentucky is presented. Some important factors that need to be considered in designing and building shale embankments are briefly discussed. Finally, a description of the construction of three experimental shale embankments in 1986 is given. These embankments were constructed to evaluate a special shale compaction provision adopted by the Kentucky Transportation Cabinet to avoid large long-term settlements and instabilities. Observations of long-term settlements of the embankments are presented

    Selection of Design Strengths of Untreated Soil Subgrades and Subgrades Treated with Cement and Hydrated Lime

    Get PDF
    Selection of design strengths of soil subgrades and subgrades treated with cement or hydrated lime is a problem in pavement design analysis and construction because a variety of different types of soils may exist in a highway corridor and a wide range of different strengths may exist after the soils are compacted to form the pavement subgrade. The selected subgrade strength will largely affect the pavement thickness obtained from the design analysis, the future pavement performances, and the overall bearing capacities of the subgrade during construction and the pavement structure after construction. In developing the proposed selection scheme, a newly developed mathematical model, based on limit equilibrium, is used. Relationships between undrained shear strength (and CBR) and tire contact stresses are developed for factors of safety 1.0 and 1.5. The minimum subgrade strength required to sustain anticipated construction tire contact stresses to avoid bearing capacity failures of the subgrade and partially constructed pavements during construction is determined. Also, a criterion is proposed for determining when subgrade stabilization is needed. Methods of selecting the design subgrade strength are examined. A previously published method, based on a least cost analysis, appears to be an appropriate approach as shown by analysis of a case study involving pavement failures during construction. Two case studies show that soaked laboratory strengths appear to be fairly representative of long-term field subgrade strengths. Hence, using soaked laboratory strengths and least cost analysis appears to be reasonable means for selecting the design strength of subgrades for pavement analysis. When chemical stabilization is used, it is suggested that the net strength gain obtained at the end of a 7-day curing period may be used in the pavement design analysis. To avoid failures of chemically stabilized layers, relationships between thicknesses of chemically treated layers and the CBR values of the untreated subgrade for a factor safety of 1.5 are presented. Layer coefficients (a3), based on 7-day strengths, are also presented for hydrated line-and cement-treated subgrades

    Use of Hydrated Lime Byproduct for Stabilization of Subgrade Soils

    Get PDF
    In January 1998, Minteck Resources requested that the Kentucky Transportation Center at the University of Kentucky perform a feasibility study to determine if a hydrated lime byproduct produced at the Carbide/Graphite facility in Calvet City, Kentucky can be used as a substitute for hydrated lime as a soil subgrade stabilizing agent. According to personnel of Carbide/Graphite Group, Incorporated, the byproduct contains a high percentage of hydrated lime

    Stabilization of an Airport Subgrade using Hydrated Lime and Fly Ash

    Get PDF
    A 457-m (1,500-ft) runway pavement extension is planned for the Georgetown-Scott County Airport (Marshall Field). The clay subgrade of the existing paved runway was stabilized with six percent (dry weight) hydrated lime. A request was made by the Kentucky Transportation Cabinet, Division of Aeronautics, to determine the feasibility of replacing a percentage of the hydrated lime stabilizer with fly ash for the extended runway subgrade. Kentucky Highway Investigative Task No. 27 was issued by the Transportation Cabinet to fund a laboratory study to determine the effects of partially replacing lime with Type F fly ash (FA). Using fly ash to replace lime could potentially, reduce stabilization cost and provide a means of using fly ash as a byproduct in lieu of landfill disposal. The subgrade extension was previously constructed to final grade with clay soils. A thin layer of topsoil and grass currently covers the subgrade. Stabilization of the extended runway is planned during pavement construction

    Full-Depth Reclamation of Asphaltic Concrete Pavements

    Get PDF
    The Kentucky Transportation Cabinet (KYTC) has used a full-depth reclamation (FDR) process over the past few years to rehabilitate asphalt pavements exhibiting widespread base failures. FDR transforms existing hot-mix asphalt (HMA) pavement and underlying granular materials into a stabilized base layer. The stabilized layer is then overlaid with a new pavement surface layer. Until now, deciding when and how to use the FDR process has not been well specified in Kentucky — the Cabinet has commonly used a Special Note for Cement Stabilized Roadbed as guidance and relied on the contractor for acceptable materials design. Previous research conducted by the Kentucky Transportation Center (KTC) and funded by KYTC proposed guidelines for FDR pavements and considered various binding compounds including, cement, asphalt emulsion, and foamed asphalt. Guidance also included a process for identifying potential projects for the FDR process and recommendations for examining material sampling, testing, mixture design, structural design parameters, and selection requirements for FDR treatment established through preconstruction planning activities. It also addressed quality control and quality assurance. This report builds on those guidelines by providing a special note for the use of the FDR in Kentucky

    Rockfall Mitigation Measures

    Get PDF
    Highways in Kentucky contain numerous rock slopes and rockfall from these slopes represent potential dangers to motorists. As these highway rock cut slopes age and deteriorate because of weathering, the potential for rockfall and rock slides increases. Some bodily injuries and traffic fatalities have been reported in past years. The general aims of this study were to establish a highway rock cut slope policy and devise a statewide system of dealing with this problem. This study represents the start of an effort by the Kentucky Transportation Cabinet to develop a proactive stance and policy toward preventing, minimizing, or mitigating the rockfall problem on the Cabinet\u27s highways and to establish a rockfall risk management program. As this study shows, the vast majority of rockfall problems in Kentucky occur in counties located east of Interstate 75. Preliminary rockfall hazardous ratings of all rock cut slopes­ – some 5270 slopes – on the Interstates, Parkways, and most Primary routes were performed using the rockfall hazardous rating system (RHRS) devised by Pierson and Vickle of Oregon DOT. This approach appears to be a good system for rating the potential for rockfall at a given highway rock cut location. Some 180 slopes were identified as hazardous. Detailed numerical ratings were performed at those locations. Differential weathering and structural characteristics – jointing and unfavorable orientations – were the major causes of rockfall. Few mitigation measures have been used on Kentucky\u27s highways. For the sedimentary rock strata in Kentucky, benching of rock slopes appears to be very effective in preventing, or mitigating, rockfall on Kentucky\u27s highways. The rock cut slope design guidelines used by the Cabinet appear to be sound. The basic problem is not design standards, but the fact that many of the highway rock slopes are aging, weathering, and deteriorating. With aging, rockfall problems will continue to increase with time. The computer rockfall simulation program devised by Colorado engineers was used to analyze several case studies of rockfall. This program appears to a very good analytical tool for assessing the stability and safety of existing rock slopes and newly designed rock slopes and will be useful in devising remedial and mitigating plans at rockfall sites

    Long-Term Performance of Flexible Pavements Located on Cement-Treated Soils

    Get PDF
    Long-term performance of flexible pavements located on cement-treated soils and the longevity of soil-cement subgrades are examined at sections of four highway routes. Ages of the soil-cement subgrades range from 6 to 30 years. Field and laboratory studies were conducted at each section. Generally. the soil-cement subgrades were non-plastic and were classified as SM, or sandy silt, according to the Unified Soil Classification System, although the classification of the untreated soil subgrades located below the treated layers ranged from CL (clay) to GC (clayey gravel). Plasticity index of the untreated soils ranged from non-plastic to 44 percent. Generally, the untreated soils were moderately plastic. In situ bearing ratios of the soil-cement subgrades were generally very large. Based on a percentile test curve, the in situ bearing ratios of the cement-treated subgrades at the 90th and 50th percent test values were about 24 and 90, respectively. Based on overlay histories of the routes, flexible pavements located on the soil-cement subgrades have performed well. In the older sections, overlays had been constructed every 11 to 14 years. Use of cement to construct stabilized subgrades represents a good design alternative when compared with other stabilizing methods and other design alternatives
    corecore