19 research outputs found

    Enzymatic Synthesis of Lipophilic Esters of Phenolic Compounds, Evaluation of Their Antioxidant Activity and Effect on the Oxidative Stability of Selected Oils

    No full text
    The aim of the study was to compare the effect of the substituent and its position in the aromatic ring on the antioxidant activity of hexanoic acid esters obtained in reactions catalyzed by immobilized lipase B from Candida antarctica. 4-Hydroxybenzyl hexanoate, 2-hydroxybenzyl hexanoate, 4-methoxybenzyl hexanoate, and vanillyl hexanoate were obtained with conversion yields of 50 to 80%. The antioxidant activity of synthesized esters, their alcohol precursors and BHT (Butylated HydroxyToluene) was compared with DPPH (2,2-diphenyl-1-picrylhydrazyl), CUPRAC (cupric ion reducing antioxidant capacity), and CBA (crocin bleaching assay) methods. Furthermore, it was investigated whether the presence of vanillyl hexanoate in a concentration of 0.01 and 0.1% affected the oxidative stability of sunflower and rapeseed oils in the Rancimat test. It was observed that the antioxidant activity of hexanoic acid esters depends on the presence and position of the hydroxyl group in the aromatic ring. The highest activities were found for vanillyl alcohol, vanillyl hexanoate, and BHT. The addition of the ester and BHT significantly extended the induction times of the tested oils, and these compounds exhibited similar activity. Vanillyl hexanoate increased the induction time from 4.49 to 5.28 h and from 2.73 to 3.12 h in the case of rapeseed and sunflower oils, respectively

    Enzymatic Synthesis of Flavours and Fragrances, Antioxidants and Antimicrobials on the Example of Benzyl Alcohol and Its Selected Derivatives

    No full text
    The aim of the work was the enzymatic synthesis of flavours and fragrances, antioxidants and antimicrobials with the use of benzyl alcohol and its selected derivatives via transesterification with vinyl acetate. The conversion yields of esters were dependent on the structure of alcohols and ranged from about 17% (4-hydroxybenzyl acetate) to approximately 90% (benzyl acetate). The performed reactions allowed the creation of esters with pleasant odours, such as benzyl, 4-methoxybenzyl, and piperonyl acetates. Furthermore, vanillyl acetate was proven to be the best antioxidant with the IC50 value of 0.83 ± 0.04 mM. In the reference to antimicrobial activity the largest inhibition zone diameters were determined for 2-hydroxybenzyl acetate and the values obtained against E. coli PCM 2057 were 19.0 ± 1.0 mm and 20.3 ± 0.6 in the case of S. aureus PCM 2054

    Exploring the Impact of Lipid-Rich Food Industry Waste Carbon Sources on the Growth of Candida cylindracea DSM 2031

    No full text
    The aim of this study was to evaluate the possibility of using several lipid-rich food industry wastes in the culture medium on the growth of Candida cylindracea DSM 2031 yeast strain. Four lipid wastes from the food industry: waste fish oil, rancid ghee, waste pork lard, and waste duck processing oil were investigated. It has been shown in the laboratory scale that the above-mentioned wastes can be used to obtain biomass and produce lipolytic enzymes by the tested strain and the C. cylindracea extracellular lipase is not constitutive. High yields of biomass (12.84, 12.75, and 12.24 g/dm3) were obtained in media containing waste duck processing oil, olive oil, and waste pork lard, respectively. The highest lipolytic activity was obtained in the media containing waste fish oil and rancid ghee (0.050 and 0.047 U/cm3). During 192-h flask cultures the highest extracellular lipase activity and biomass yield were observed in the late logarithmic phase. The study showed that there is a potential for waste management to produce lipolytic enzymes or to produce yeast biomass. The use of waste substrates may contribute to lowering the costs of commercial production, and such a solution is part of the sustainable development strategy

    Investigating Culture Media for Obtaining Lipolytic Biocatalysts Based on Rhizopus oryzae Fungi

    No full text
    Rhizopus oryzae is widely distributed in nature and can be isolated from different substrates such as decomposing vegetables, fruits and various soils. It is generally classified as GRAS filamentous fungi and commonly used in the production of oriental traditional food such as tempeh or peka. This microorganism has great industrial potential due to the capability to synthesize enzymes (glucoamylases, cellulases and lipases) and organic acids (lactic acid, fumaric acid). The most studied enzymes of the fungi are lipases (ROL). Therefore, the aim of the study was the selection of growth medium content and initial pH rate, which would provide high lipase synthesis yield in 5 days shaken cultures. Two fractions of lipases were investigated in order to obtain lipase biocatalysts: extracellular enzymes present in supernatant and cell-bound lipases in biomass. The used nutrient-rich media were: YPG (10 g/L yeast extract, 20 g/L peptone, 20 g/L glucose), YPO (10 g/L yeast extract, 20 g/L peptone, 20 g/L olive oil), YMG (3 g/L yeast extract, 3 g/L malt extract, 5 g/L peptone, 20 g/L glucose), YMO (3 g/L yeast extract, 3 g/L malt extract, 5 g/L peptone, 20 g/L olive oil). The mineral media were: SMG (10 g/L peptone, 14 g/L KH2PO4, 2.4 g/L K2HPO4, 0.4 g/L MgSO4, 20 g/L glucose) and SMO (10 g/L peptone, 14 g/L KH2PO4, 2.4 g/L K2HPO4, 0.4 g/L MgSO4, 20 g/L olive oil). Fungi biomass and supernatant were separated and used to measure lipase activity by a spectrophotometric method based on the hydrolysis of p-nitrophenyl laurate. The results showed that the highest lipase activity after 5 days of cultivation was reached in YPO medium for biomass (from 7- to 60-fold higher results depending on the compared variant of culture media) and YMG for supernatant (from 3- to 6.5-fold higher results depending on the used variant of culture media). The addition of citric acid resulted in a two times increase of the activity of produced lipases after 5 days of cultivation

    Bio-Based Materials versus Synthetic Polymers as a Support in Lipase Immobilization: Impact on Versatile Enzyme Activity

    No full text
    To improve enzyme stability, the immobilization process is often applied. The choice of a support on which the enzymes are adsorbed plays a major role in enhancing biocatalysts’ properties. In this study, bio-based (i.e., chitosan, coffee grounds) and synthetic (i.e., Lewatit VP OC 1600) supports were used in the immobilization of lipases of various microbial origins (yeast (Yarrowia lipolytica) and mold (Aspergillus oryzae)). The results confirmed that the enzyme proteins had been adsorbed on the surface of the selected carriers, but not all of them revealed comparably high catalytic activity. Immobilized CALB (Novozym 435) was used as a commercial reference biocatalyst. The best hydrolytic activity (higher than that of CALB) was observed for Novozym 51032 (lipase solution of A. oryzae) immobilized on Lewatit VP OC 1600. In terms of synthetic activity, there were only slight differences between the applied carriers for A. oryzae lipase, and the highest measures were obtained for coffee grounds. All of the biocatalysts had significantly lower activity in the synthesis reactions than the reference catalyst

    Aeration and Stirring in Yarrowia lipolytica Lipase Biosynthesis during Batch Cultures with Waste Fish Oil as a Carbon Source

    No full text
    Yarrowia lipolytica is one of the most studied non-conventional forms of yeast, exhibiting a high secretory capacity and producing many industrially important and valuable metabolites. The yeast conceals a great biotechnological potential to synthesize organic acids, sweeteners, microbial oil, or fragrances. The vast majority of bioprocesses are carried out in bioreactors, where suitable culture conditions are provided. In the current study, the effect of agitation speed (200–600 rpm) and air flow rate (0.0375–2.0 dm3/(dm3 × min)) on the biomass yield and lipase activity of Y. lipolytica KKP 379 is analyzed in a growth medium containing waste fish oil. The increase of aeration intensity limited the period of oxygen deficit in the medium. Simultaneously, an increase in lipolytic activity was observed from 2.09 U/cm3 to 14.21 U/cm3; however, an excessive agitation speed likely caused oxidative or shear stresses, and a reduction in lipolytic activity was observed. Moreover, it is confirmed that the synthesis of lipases is related to oxygen consumption, pH, and the yeast growth phase, and appropriate process selection may provide two advantages, namely, the maximum use of the waste carbon source and the production of lipolytic enzymes that are valuable in many industries

    Studies on the Catalytic Properties of Crude Freeze-Dried Preparations of Yarrowia lipolytica Extracellular Lipases for Geranyl Ester Derivative Synthesis

    No full text
    The study aimed to evaluate the impact of selected factors of the freeze-drying process on the hydrolytic and synthetic activity of the extracellular lipases of Y. lipolytica KKP 379 and to attempt the use of the crude enzyme preparation as a biocatalyst in the synthesis of geranyl 4-hydroxyphenylpropanoate. Antioxidant and antibacterial properties of the geranyl ester derivative were also investigated in order to evaluate their usefulness as a novel food additive. The studies confirmed that freeze-drying was an effective method of dehydrating yeast supernatant and allowed for obtaining lyophilizates with low water activity from 0.055 to 0.160. The type and concentration of the additive (2–6% whey protein hydrolyzate, 0.5% and 1% ammonium sulphate) had a significant effect on the hydrolytic activity of enzyme preparations, while the selected variants of drying temperature during the freeze-drying process were not significant (10 °C and 50 °C). Low yield of geranyl 4-hydroxyphenylopropionate was shown when the lyophilized supernatant was used (5.3%), but the yield of ester synthesis increased when the freeze-dried Y. lipolytica yeast biomass was applied (47.9%). The study confirmed the antioxidant properties of the synthesized ester by the DPPH• and CUPRAC methods, as well as higher antibacterial activity against tested bacteria than its precursor with 0.125 mM MIC (minimal inhibitory concentration) against L. monocytogenes

    Phosphorus and Nitrogen Limitation as a Part of the Strategy to Stimulate Microbial Lipid Biosynthesis

    No full text
    Microbial lipids called a sustainable alternative to traditional vegetable oils invariably capture the attention of researchers. In this study, the effect of limiting inorganic phosphorus (KH2PO4) and nitrogen ((NH4)2SO4) sources in lipid-rich culture medium on the efficiency of cellular lipid biosynthesis by Y. lipolytica yeast has been investigated. In batch cultures, the carbon source was rapeseed waste post-frying oil (50 g/dm3). A significant relationship between the concentration of KH2PO4 and the amount of lipids accumulated has been revealed. In the shake-flask cultures, storage lipid yield was correlated with lower doses of phosphorus source in the medium. In bioreactor culture in mineral medium with (g/dm3) 3.0 KH2PO4 and 3.0 (NH4)2SO4, the cellular lipid yield was 47.5% (w/w). Simultaneous limitation of both phosphorus and nitrogen sources promoted lipid accumulation in cells, but at the same time created unfavorable conditions for biomass growth (0.78 gd.m./dm3). Increased phosphorus availability with limited cellular access to nitrogen resulted in higher biomass yields (7.45 gd.m./dm3) than phosphorus limitation in a nitrogen-rich medium (4.56 gd.m./dm3), with comparable lipid yields (30% and 32%). Regardless of the medium composition, the yeast preferentially accumulated oleic and linoleic acids as well as linolenic acid up to 8.89%. Further, it is crucial to determine the correlation between N/P molar ratios, biomass growth and efficient lipid accumulation. In particular, considering the contribution of phosphorus as a component of coenzymes in many metabolic pathways, including lipid biosynthesis and respiration processes, its importance as a factor in the cultivation of the oleaginous microorganisms was highlighted

    Mini-Review on the Enzymatic Lipophilization of Phenolics Present in Plant Extracts with the Special Emphasis on Anthocyanins

    No full text
    Different plant extracts have the potential to be important sources of phenolic compounds. Their antibacterial, antifungal and antioxidant properties are of interest to researchers due to various possibilities for use in the pharmacy, cosmetic and food industries. Unfortunately, the direct application of phenolics in food is limited because of their hydrophilic nature and low solubility. The review is devoted to the recent advances in the methods of lipophilization of phenolic extracts along with the use of enzymes. The concept of extract modification instead of single compound modification is based on the expected synergistic effect of many phenolic compounds. The main focus is on the phenolic compounds found in fruits, flowers and leaves of different common and underutilized as well as medicinal, folk-medicinal or endemic plants. The compiled papers point to the great interest in the modification of anthocyanins, highly active but often unstable phenolics. Some examples of other flavonoids are also outlined. The possible applications of the lipophilized plant extracts are presented for improving the stability of edible oils, decreasing the content of acrylamide, exhibiting higher color stability in thermal processing and increasing the nutritional value
    corecore