50 research outputs found
Effect of protonation state and N-acetylation of chitosan on its interaction with xanthan gum: a molecular dynamics simulation study
Hydrophilic matrices composed of chitosan (CS) and xanthan gum (XG) complexes are of pharmaceutical interest in relation to drug delivery due to their ability to control the release of active ingredients. Molecular dynamics simulations (MDs) have been performed in order to obtain information pertaining to the effect of the state of protonation and degree of N-acetylation (DA) on the molecular conformation of chitosan and its ability to interact with xanthan gum in aqueous solutions. The conformational flexibility of CS was found to be highly dependent on its state of protonation. Upon complexation with XG, a substantial restriction in free rotation around the glycosidic bond was noticed in protonated CS dimers regardless of their DA, whereas deprotonated molecules preserved their free mobility. Calculated values for the free energy of binding between CS and XG revealed the dominant contribution of electrostatic forces on the formation of complexes and that the most stable complexes were formed when CS was at least half-protonated and the DA was ≤50%. The results obtained provide an insight into the main factors governing the interaction between CS and XG, such that they can be manipulated accordingly to produce complexes with the desired controlled-release effect
Comparative analysis of co-processed starches prepared by three different methods
Co-processing is currently of interest in the generation of high-functionality excipients for tablet formulation. In the present study, comparative analysis of the powder and tableting properties of three co-processed starches prepared by three different methods was carried out. The co-processed excipients consisting of maize starch (90%), acacia gum (7.5%) and colloidal silicon dioxide (2.5%) were prepared by co-dispersion (SAS-CD), co-fusion (SAS-CF) and co-granulation (SAS-CG). Powder properties of each co-processed excipient were characterized by measuring particle size, flow indices, particle density, dilution potential and lubricant sensitivity ratio. Heckel and Walker models were used to evaluate the compaction behaviour of the three co-processed starches. Tablets were produced with paracetamol as the model drug by direct compression on an eccentric Tablet Press fitted with 12 mm flat-faced punches and compressed at 216 MPa. The tablets were stored at room temperature for 24 h prior to evaluation. The results revealed that co-granulated co-processed excipient (SAS-CG) gave relatively better properties in terms of flow, compressibility, dilution potential, deformation, disintegration, crushing strength and friability. This study has shown that the method of co-processing influences the powder and tableting properties of the co-processed excipient
Comparative analysis of co-processed starches prepared by three different methods
Co-processing is currently of interest in the generation of high-functionality excipients for tablet formulation. In the present study, comparative analysis of the powder and tableting properties of three co-processed starches prepared by three different methods was carried out. The co-processed excipients consisting of maize starch (90%), acacia gum (7.5%) and colloidal silicon dioxide (2.5%) were prepared by co-dispersion (SAS-CD), co-fusion (SAS-CF) and co-granulation (SAS-CG). Powder properties of each co-processed excipient were characterized by measuring particle size, flow indices, particle density, dilution potential and lubricant sensitivity ratio. Heckel and Walker models were used to evaluate the compaction behaviour of the three co-processed starches. Tablets were produced with paracetamol as the model drug by direct compression on an eccentric Tablet Press fitted with 12 mm flat-faced punches and compressed at 216 MPa. The tablets were stored at room temperature for 24 h prior to evaluation. The results revealed that co-granulated co-processed excipient (SAS-CG) gave relatively better properties in terms of flow, compressibility, dilution potential, deformation, disintegration, crushing strength and friability. This study has shown that the method of co-processing influences the powder and tableting properties of the co-processed excipient
High-altitude and high-latitude O<sup>+</sup> and H<sup>+</sup> outflows: the effect of finite electromagnetic turbulence wavelength
The energization of ions, due to interaction with electromagnetic turbulence (i.e. wave-particle interactions), has an important influence on H<sup>+</sup> and O<sup>+</sup> ions outflows in the polar region. The effects of altitude and velocity dependent wave-particle interaction on H<sup>+</sup> and O<sup>+</sup> ions outflows in the auroral region were investigated by using Monte Carlo method. The Monte Carlo simulation included the effects of altitude and velocity dependent wave-particle interaction, gravity, polarization electrostatic field, and divergence of auroral geomagnetic field within the simulation tube (1.2–10 earth radii, <i>R<sub>E</sub></i>). As the ions are heated due to wave-particle interactions (i.e. ion interactions with electromagnetic turbulence) and move to higher altitudes, the ion gyroradius ρ<sub><i>i</i></sub> may become comparable to the electromagnetic turbulence wavelength λ<sub>⊥</sub> and consequently (<i>k</i><sub>⊥ρ<sub>i</sub></sub>) becomes larger than unity. This turns the heating rate to be negligible and the motion of the ions is described by using Liouville theorem. The main conclusions are as follows: (1) the formation of H<sup>+</sup> and O<sup>+</sup> conics at lower altitudes and for all values of λ<sub>⊥</sub>; (2) O<sup>+</sup> toroids appear at 3.72 <i>R<sub>E</sub></i>, 2.76 <i>R<sub>E</sub></i> and 2 <i>R<sub>E</sub></i>, for λ<sub>⊥</sub>=100, 10, and 1 km, respectively; however, H<sup>+</sup> toroids appear at 6.6 <i>R<sub>E</sub></i>, 4.4 <i>R<sub>E</sub></i> and 3 <i>R<sub>E</sub></i>, for λ<sub>⊥</sub>=100, 10, and 1 km, respectively; and H<sup>+</sup> and O<sup>+</sup> ion toroids did not appear for the case λ<sub>⊥</sub> goes to infinity, i.e. when the effect of velocity dependent wave-particle interaction was not included; (3) As λ<sub>⊥</sub> decreases, H<sup>+</sup> and O<sup>+</sup> ion drift velocity decreases, H<sup>+</sup> and O<sup>+</sup> ion density increases, H<sup>+</sup> and O<sup>+</sup> ion perpendicular temperature and H<sup>+</sup> and O<sup>+</sup> ion parallel temperature decrease; (4) Finally, including the effect of finite electromagnetic turbulence wavelength, i.e. the effect of velocity dependent diffusion coefficient and consequently, the velocity dependent wave-particle interactions produce realistic H<sup>+</sup> and O<sup>+</sup> ion temperatures and H<sup>+</sup> and O<sup>+</sup> toroids, and this is, qualitatively, consistent with the observations of H<sup>+</sup> and O<sup>+</sup> ions in the auroral region at high altitudes
A Monte Carlo simulation of the effect of ion self-collisions on the ion velocity distribution function in the high-latitude F-region
Non-Maxwellian ion velocity distribution
functions have been theoretically predicted and confirmed by observations, to
occur at high latitudes. These distributions deviate from Maxwellian due to the
combined effect of the EĂ—B drift and
ion-neutral collisions. The majority of previous literature, in which the effect
of ion self-collisions was neglected, established a clear picture for the ion
distribution under a wide range of conditions. At high altitudes and/or for
solar maximum conditions, the ion-to-neutral density ratio increases and, hence,
the role of ion self-collisions becomes appreciable. A Monte Carlo simulation
was used to investigate the behaviour of O+ ions that are EĂ—B-drifting
through a background of neutral O, with the effect of O+ (Coulomb)
self-collisions included. Wide ranges of the ion-to-neutral density ratio ni/nn
and the electrostatic field E were considered in order to investigate the
change of ion behaviour with solar cycle and with altitude. For low altitudes
and/or solar minimum (ni/nn≤ 10-5),
the effect of self-collisions is negligible. For higher values of ni/nn,
the effect of self-collisions becomes significant and, hence, the non-Maxwellian
features of the O+ distribution are reduced. For example, the
parallel temperature Ti\Vert increases, the
perpendicular temperature Ti&bottom; decreases, the
temperature anisotropy approaches unity and the toroidal features of the ion
distribution function become less pronounced. Also, as E increases, the
ion-neutral collision rate increases, while the ion-ion collision rate
decreases. Therefore, the effect of ion self-collisions is reduced. Finally, the
Monte Carlo results were compared to those that used simplified collision models
in order to assess their validity. In general, the simple collision models tend
to be more accurate for low E and for high ni/nn
O+ and H+ ion heat fluxes at high altitudes and high latitudes
Higher order moments, e.g., perpendicular and
parallel heat fluxes, are related to non-Maxwellian plasma
distributions. Such distributions are common when the
plasma environment is not collision dominated. In the polar
wind and auroral regions, the ion outflow is collisionless
at altitudes above about 1.2RE geocentric. In these regions
wave–particle interaction is the primary acceleration mechanism
of outflowing ionospheric origin ions. We present the
altitude profiles of actual and “thermalized” heat fluxes for
major ion species in the collisionless region by using the
Barghouthi model. By comparing the actual and “thermalized”
heat fluxes, we can see whether the heat flux corresponds
to a small perturbation of an approximately bi-
Maxwellian distribution (actual heat flux is small compared
to “thermalized” heat flux), or whether it represents a significant
deviation (actual heat flux equal or larger than “thermalized”
heat flux). The model takes into account ion heating
due to wave–particle interactions as well as the effects of
gravity, ambipolar electric field, and divergence of geomagnetic
field lines. In the discussion of the ion heat fluxes, we
find that (1) the role of the ions located in the energetic tail
of the ion velocity distribution function is very significant
and has to be taken into consideration when modeling the
ion heat flux at high altitudes and high latitudes; (2) at times
the parallel and perpendicular heat fluxes have different signs
at the same altitude. This indicates that the parallel and perpendicular
parts of the ion energy are being transported in
opposite directions. This behavior is the result of many competing
processes; (3) we identify altitude regions where the
actual heat flux is small as compared to the “thermalized”
heat flux. In such regions we expect transport equation solutions
based on perturbations of bi-Maxwellian distributions
to be applicable. This is true for large altitude intervals for
protons, but only the lowest altitudes for oxygen
A comparison study between observations and simulation results of Barghouthi model for O<sup>+</sup> and H<sup>+</sup> outflows in the polar wind
To advance our understanding of the effect of wave-particle interactions on
ion outflows in the polar wind region and the resulting ion heating and
escape from low altitudes to higher altitudes, we carried out a comparison
between polar wind simulations obtained using Barghouthi model with
corresponding observations obtained from different satellites. The
Barghouthi model describes O+ and H+ outflows in the polar wind
region in the range 1.7 RE to 13.7 RE, including the effects of
gravity, polarization electrostatic field, diverging geomagnetic field
lines, and wave-particle interactions. Wave-particle interactions were
included into the model by using a particle diffusion equation, which
depends on diffusion coefficients determined from estimates of the typical
electric field spectral density at relevant altitudes and frequencies. We
provide a formula for the velocity diffusion coefficient that depends on
altitude and velocity, in which the velocity part depends on the
perpendicular wavelength of the electromagnetic turbulence λ⊥.
Because of the shortage of information about λ⊥, it was
included into the model as a parameter. We produce different simulations
(i.e. ion velocity distributions, ions density, ion drift velocity, ion
parallel and perpendicular temperatures) for O+ and H+ ions, and
for different λ⊥. We discuss the simulations in terms of
wave-particle interactions, perpendicular adiabatic cooling, parallel
adiabatic cooling, mirror force, and ion potential energy. The main findings
of the simulations are as follows: (1) O+ ions are highly energized at
all altitudes in the simulation tube due to wave-particle interactions that
heat the ions in the perpendicular direction, and part of this gained energy
transfer to the parallel direction by mirror force, resulting in
accelerating O+ ions along geomagnetic field lines from lower altitudes
to higher altitudes. (2) The effect of wave-particle interactions is
negligible for H+ ions at altitudes below ~7 RE, while it is
important for altitudes above 7 RE. For O+ wave particle
interaction is very significant at all altitudes. (3) For certain λ⊥ and at points, altitudes, where the ion gyroradius is equal to or
less than λ⊥, the effect of wave-particle interactions is
independent of the velocity and it depends only on the altitude part of the
velocity diffusion coefficient; however, the effect of wave-particle
interactions reduce above that point, called saturation point, and the
heating process turns to be self-limiting heating. (4) The most interesting
result is the appearance of O+ conics and toroids at low altitudes and
continue to appear at high altitudes; however, they appear at very high
altitudes for H+ ions. We compare quantitatively and qualitatively
between the simulation results and the corresponding observations. As a
result of many comparisons, we find that the best agreement occurs when
λ⊥ equals to 8 km. The quantitative comparisons show that many
characteristics of the observations are very close to the simulation
results, and the qualitative comparisons between the simulation results for
ion outflows and the observations produce very similar behaviors. To our
knowledge, most of the comparisons between observations (ion velocity
distribution, density, drift velocity, parallel and perpendicular
temperatures, anisotropy, etc.) and simulations obtained from different
models produce few agreements and fail to explain many observations (see Yau
et al., 2007; Lemaire et al., 2007; Tam et al., 2007; Su et al., 1998;
Engwall et al., 2009). This paper presents many close agreements between
observations and simulations obtained by Barghouthi model, for O+ and
H+ ions at different altitudes i.e. from 1.7 RE to 13.7 RE
O<sup>+</sup> and H<sup>+</sup> ion heat fluxes at high altitudes and high latitudes
Higher order moments, e.g., perpendicular and parallel heat fluxes, are
related to non-Maxwellian plasma distributions. Such distributions are common
when the plasma environment is not collision dominated. In the polar wind and
auroral regions, the ion outflow is collisionless at altitudes above about
1.2 RE geocentric. In these regions wave–particle interaction is
the primary acceleration mechanism of outflowing ionospheric origin ions. We
present the altitude profiles of actual and "thermalized" heat fluxes for
major ion species in the collisionless region by using the Barghouthi model. By
comparing the actual and "thermalized" heat fluxes, we can see whether the heat
flux corresponds to a small perturbation of an approximately bi-Maxwellian
distribution (actual heat flux is small compared to "thermalized" heat
flux), or whether it represents a significant deviation (actual heat flux equal or
larger than "thermalized" heat flux). The model takes into account ion
heating due to wave–particle interactions as well as the effects of
gravity, ambipolar electric field, and divergence of geomagnetic field lines.
In the discussion of the ion heat fluxes, we find that (1) the role of the
ions located in the energetic tail of the ion velocity distribution function
is very significant and has to be taken into consideration when modeling the
ion heat flux at high altitudes and high latitudes; (2) at times the parallel
and perpendicular heat fluxes have different signs at the same altitude. This
indicates that the parallel and perpendicular parts of the ion energy are
being transported in opposite directions. This behavior is the result of many
competing processes; (3) we identify altitude regions where the actual heat
flux is small as compared to the "thermalized" heat flux. In such regions
we expect transport equation solutions based on perturbations of
bi-Maxwellian distributions to be applicable. This is true for large altitude
intervals for protons, but only the lowest altitudes for oxygen