Status and performance of the underground muon detector of the Pierre Auger Observatory

The Auger Muons and Infill for the Ground Array (AMIGA) is an enhancement of the Pierre Auger Observatory, whose purpose is to lower the energy threshold of the observatory down to 1016.5 eV, and to measure the muonic content of air showers directly. These measurements will significantly contribute to the determination of primary particle masses in the range between the second knee and the ankle, to the study of hadronic interaction models with air showers, and, in turn, to the understanding of the muon puzzle. The underground muon detector of AMIGA is concomitant to two triangular grids of water-Cherenkov stations with spacings of 433 and 750 m; each grid position is equipped with a 30 m2 plastic scintillator buried at 2.3 m depth. After the engineering array completion in early 2018 and general improvements to the design, the production phase commenced. In this work, we report on the status of the underground muon detector, the progress of its deployment, and the performance achieved after two years of operation. The detector construction is foreseen to finish by mid-2022

Operations of the Pierre Auger Observatory

The construction of the first stage of the Pierre Auger Observatory, designed for research of ultra-high energy cosmic rays, began in 2001 with a prototype system. The Observatory has been collecting data since early 2004 and was completed in 2008. The Observatory is situated at 1400 m above sea level near Malargüe, (Mendoza province) in western Argentina, covering a vast plain of 3000 km2, known as the Pampa Amarilla. The Observatory consists of a hybrid detector, in which there are 1660 water-Cherenkov stations, forming the Surface Detector (SD) and 27 peripheral atmospheric fluorescence telescopes, comprising the Fluorescence Detector (FD). Over time, the Auger Observatory has been enhanced with different R&D prototypes and is recently being to an important upgrade called AugerPrime. In the present contribution, the general operations of the SD and FD will be described. In particular the FD shift procedure - executable locally in Malargüe or remotely by teams in control rooms abroad within the Collaboration - and the newly SD shifts (operating since 2019) will be explained. Additionally, the SD and FD maintenance campaigns, as well as the data taking and data handling at a basic level, will be reported

Expected performance of the AugerPrime Radio Detector

The AugerPrime Radio Detector will significantly increase the sky coverage of mass-sensitive measurements of ultra-high energy cosmic rays with the Pierre Auger Observatory. The detection of highly inclined air showers with the world’s largest 3000 km2 radio-antenna array in coincidence with the Auger water-Cherenkov detector provides a clean separation of the electromagnetic and muonic shower components. The combination of these highly complementary measurements yields a strong sensitivity to the mass composition of cosmic rays. We will present the first results of an end-to-end simulation study of the performance of the AugerPrime Radio Detector. The study features a complete description of the AugerPrime radio antennas and reconstruction of the properties of inclined air showers, in particular the electromagnetic energy. The performance is evaluated utilizing a comprehensive set of simulated air showers together with recorded background. The estimation of an energy- and direction-dependent aperture yields an estimation of the expected 10-year event statistics. The potential to measure the number of muons in air showers with the achieved statistics is outlined. Based on the achieved energy resolution, the potential to discriminate between different cosmic-ray primaries is presented

Adjustments to Model Predictions of Depth of Shower Maximum and Signals at Ground Level using Hybrid Events of the Pierre Auger Observatory

We present a new method to explore simple ad-hoc adjustments to the predictions of hadronic interaction models to improve their consistency with observed two-dimensional distributions of the depth of shower maximum, Xmax, and signal at ground level, as a function of zenith angle. The method relies on the assumption that the mass composition is the same at all zenith angles, while the atmospheric shower development and attenuation depend on composition in a correlated way. In the present work, for each of the three leading LHC-tuned hadronic interaction models, we allow a global shift ΔXmax of the predicted shower maximum, which is the same for every mass and energy, and a rescaling RHad of the hadronic component at ground level which depends on the zenith angle. We apply the analysis to 2297 events reconstructed by both fluorescence and surface detectors at the Pierre Auger Observatory with energies 1018.5 − 1019.0 eV. Given the modeling assumptions made in this analysis, the best fit reaches its optimum value when shifting the Xmax predictions of hadronic interaction models to deeper values and increasing the hadronic signal at both extreme zenith angles. The resulting change in the composition towards heavier primaries alleviates the previously identified model deficit in the hadronic signal (commonly called the muon deficit), but does not remove it. Because of the size of the required corrections ΔXmax and RHad and the large number of events in the sample, the statistical significance of the corrections is large, greater than 5σstat even for the combination of experimental systematic shifts within 1σsys that are the most favorable for the models

The XY Scanner – A Versatile Method of the Absolute End-to-End Calibration of Fluorescence Detectors

One of the crucial detector systems of the Pierre Auger Observatory is the fluorescence detector composed of 27 large-aperture wide-angle Schmidt telescopes. In the past, these telescopes were absolutely calibrated by illuminating the whole aperture with a uniform large-diameter light source. This absolute calibration was performed roughly once every three years, while a relative calibration was performed on a nightly basis. In this contribution, a new technique for an absolute end-to-end calibration of the fluorescence telescopes is presented. For this technique, a portable, calibrated light source mounted on a rail system is moved across the aperture of each telescope instead of illuminating the whole aperture at once. A dedicated setup using a combination of NIST traceable photodiodes to measure the mean intensity and a PMT for pulse-to-pulse stability tracking has been built for the absolute calibration of the light source. As a result of these complementary measurements, the pulse-to-pulse light source intensity can be known to the 3.5% uncertainty level. The analysis of the readout of the PMT camera at each position of the light source together with the knowledge of the light source emission provides an absolute end-to-end calibration of the telescope. We will give a brief overview of this novel calibration method and its current status as well as show preliminary results from the measurement campaigns performed so far

The ultra-high-energy cosmic-ray sky above 32 EeV viewed from the Pierre Auger Observatory

The region of the toe in the cosmic-ray spectrum, located at about 45 EeV by the Pierre Auger Collaboration, is of primary interest in the search for the origin of ultra-high energy cosmic rays (UHECRs). The suppression of the flux with increasing energy can be explained by the interaction of UHECRs with intergalactic photons, resulting in a shrinking of the observable universe, and/or by cut-offs in acceleration potential at the astrophysical sources, yielding a high-rigidity sample of single (or few) UHECR species around the toe. The predominance of foreground sources combined with reduced deflections could thus offer a path towards localizing ultra-high energy accelerators, through the study of UHECR arrival directions. In this contribution, we present the results of blind and astrophysically-motivated searches for anisotropies with data collected above 32 EeV during the first phase of the Pierre Auger Observatory, i.e. prior to the AugerPrime upgrade, for an exposure of over 120,000 km2 yr sr. We have conducted model-independent searches for overdensities at small and intermediate angular scales, correlation studies with several astrophysical structures, and cross-correlation analyses with catalogs of candidate extragalactic sources. These analyses provide the most important evidence to date for anisotropy in UHECR arrival directions around the toe as measured from a single observatory

Performance of the 433 m surface array of the Pierre Auger Observatory

The Pierre Auger Observatory, located in western Argentina, is the world’s largest cosmic-ray observatory. While it was originally built to study the cosmic-ray flux above 1018.5 eV, several enhancements have reduced this energy threshold. One such enhancement is a surface array composed of a triangular grid of 19 water-Cherenkov detectors separated by 433 m (SD-433) to explore the energies down to about 1016 eV. We are developing two research lines employing the SD-433. Firstly, we will measure the energy spectrum in a region where previous experiments have shown evidence of the second knee. Secondly, we will search for ultra-high energy photons to study PeV cosmic-ray sources residing in the Galactic center. In this work, we introduce the SD-433 and we show that it is fully efficient above 5×1016 eV for hadronic primaries with θ < 45°. Using seven years of data, we present the parametrization of the lateral distribution function of measured signals. Finally, we show that an angular resolution of 1.8° (0.5°) can be attained at the lowest (highest) primary energies. Our study lays the goundmark for measurements in the energy range above 1016 eV by utilizing the SD-433 and thus expanding the scientific output of the Auger surface detector

AugerPrime Upgraded Electronics

Since 2015, the Pierre Auger Observatory has been undergoing an important upgrade. It consists of the addition of Scintillator Surface Detectors (SSD) on top of the existing Water-Cherenkov Detectors (WCDs), as well as a small Photo-Multiplier Tube (sPMT) inside the WCDs (both excluding the outer crown of the array), an Underground Muon Detectors (UMD) in the limited higher density area, denominated Infill, where the stations are installed at a distance of 750 m instead of the standard 1.5 km (SD750 and later also in the SD433), and a Radio Detector antenna array (RD) at each of the 1660 surface detector stations. To process the signals of all these detector systems and to increase the dynamic range and time resolution, new electronics, Upgraded Unified Boards (UUBs) have been developed and are being produced and deployed at the Observatory. The combination of all of these new features of the Surface Detector (SD) will provide an enhanced capability for answering the still many open questions related to the nature of ultra-high energy cosmic rays. In this work the main characteristics, the production and validation chain, the performances and the status of the implementation of the new Upgraded Unified Boards will be illustrated. The first data collected from the already operational upgraded stations in the array will also be presented

First results from the AugerPrime Radio Detector

The Pierre Auger Observatory investigates the properties of the highest-energy cosmic rays with unprecedented precision. The aim of the AugerPrime upgrade is to improve the sensitivity to the primary particle type. The improved mass sensitivity is the key to exploring the origin of the highest-energy particles in the Universe. The purpose of the Radio Detector (as part of AugerPrime) is to extend the sensitivity of the mass measurements to zenith angles in the range from 65° to 85°. A radio antenna, sensitive in two polarization directions and covering a bandwidth from 30 to 80 MHz, will be added to each of the 1661 surface detector stations over the full 3000 km2 area, forming the world’s largest radio array for the detection of cosmic particles. Since November 2019, an engineering array comprised of ten stations has been installed in the field. The radio antennas are calibrated using the Galactic (diffuse) emission. The sidereal modulation of this signal is monitored continuously and is used to obtain an end-to-end calibration from the receiving antenna to the ADC in the read-out electronics. The calibration method and first results will be presented. The engineering array is also fully integrated in the data acquisition of the Observatory and records air showers regularly. The first air showers detected simultaneously with the water-Cherenkov detectors and the Radio Detectors will be presented. Simulations of the detected showers, based on the reconstructed quantities, have been conducted with CORSIKA/CoREAS. A comparison of the measured radio signals with those predicted by simulations exhibits satisfying agreement

Monte Carlo simulations for the Pierre Auger Observatory using the VO auger grid resources

The Pierre Auger Observatory, located near Malargüe, Argentina, is the world’s largest cosmic-ray detector. It comprises a 3000 km2 surface detector and 27 fluorescence telescopes, which measure the lateral and longitudinal distributions of the many millions of air-shower particles produced in the interactions initiated by a cosmic ray in the Earth’s atmosphere. The determination of the nature of cosmic rays and studies of the detector performances rely on extensive Monte Carlo simulations describing the physics processes occurring in extensive air showers and the detector responses. The aim of the Monte Carlo simulations task is to produce and provide the Auger Collaboration with reference libraries used in a wide variety of analyses. All multipurpose detector simulations are currently produced in local clusters using Slurm and HTCondor. The bulk of the shower simulations are produced on the grid, via the Virtual Organization auger, using the DIRAC middleware. The job submission is made via python scripts using the DIRAC-API. The Auger site is undergoing a major upgrade, which includes the installation of new types of detectors, demanding increased simulation resources. The novel detection of the radio component of extensive air showers is the most challenging endeavor, requiring dedicated shower simulations with very long computation times, not optimized for the grid production. For data redundancy, the simulations are stored on the Lyon server and the grid Disk Pool Manager and are accessible to the Auger members via iRODS and DIRAC, respectively. The CERN VM-File System is used for software distribution where, soon, the Auger Offline software will also be made available