7 research outputs found
Two glaciers and one sedimentary sink: the competing role of the Aare and the Valais glaciers in filling an overdeepened trough inferred from provenance analysis
The extent and distribution of glaciers on the Swiss Plateau during the Last Glacial Maximum (LGM) can be determined from the geological record. However, similar reconstructions for the glaciations that preceded the LGM are far more difficult to be made due to the destruction of suitable sedimentary
records through recurring glaciations or due to the inaccessibility of preserved records. Here, we explored Quaternary sediments that were deposited during the Marine Isotope Stage (MIS) 8 glaciation at least around 250 ka, and which were recovered in a drilling that was sunk into an overdeepened
bedrock trough west of Bern (Switzerland). We analyzed the sediment bulk chemical composition of the deposits to investigate the supply of the material to the area by either the Aare Glacier, the Saane Glacier, or the Valais Glacier, and we complement this investigation with the results of heavy mineral analyses and geochemical information from detrital garnet. The potential confluence of the Valais and the Aare glaciers in the Bern area makes this location ideal for such an analysis. We determined the sediment bulk chemical signal of the various lithological units in the central Swiss Alps where the glaciers originated, which we used as endmembers for our provenance analysis. We then combined the results of this fingerprinting with the existing information on the sedimentary succession and its deposition history. This sedimentary suite is composed of two sequences, Sequence A (lower) and Sequence B (upper), both of which comprise a basal till that is overlain by lacustrine sediments. The till at the base of Sequence A was formed by the Aare Glacier. The overlying lacustrine deposits of an ice-contact lake were mainly supplied by the Aare Glacier. The basal till in Sequence B was also
formed by the Aare Glacier. For the lacustrine deposits in Sequence B, the heavy mineral and garnet geochemical data indicate that the sediment was supplied by the Aare and the Saane glaciers. We use these findings for a paleogeographic reconstruction. During the time when Sequence A and the basal till in Sequence B were deposited, the Aare Glacier dominated the area. This strongly contrasts with the situation during the LGM, when the Aare Glacier was deflected by the Valais Glacier towards the northeast. The Valais Glacier was probably less extensive during MIS 8, but it was potentially presentin the area, and it could have been essential for damming a lake in which the material supplied by the Aare and the Saane glaciers accumulated. In conclusion, combining provenance with sedimentological data, we could document how sediment was supplied to the investigated overdeepened basin during the MIS 8 glacial period and how glaciers were arranged in a way that was markedly different from the LGM
Overdeepenings in the Swiss plateau: U-shaped geometries underlain by inner gorges
We investigated the mechanisms leading to the formation of tunnel valleys in the Swiss foreland near Bern. We proceeded through producing 3D maps of the bedrock topography based on drillhole information and a new gravimetric survey combined with modelling. In this context, the combination of information about the densities of the sedimentary fill and of the bedrock, together with published borehole data and the results of gravity surveys along 11 profiles across the valleys, served as input for the application of our 3D gravity modelling software referred to as PRISMA. This ultimately allowed us to model the gravity effect of the Quaternary fill of the overdeepenings and to produce cross-sectional geometries of these troughs. The results show that 2–3 km upstream of the city of Bern, the overdeepenings are approximately 3 km wide. They are characterized by steep to oversteepened lateral flanks and a wide flat base, which we consider as a U-shaped cross-sectional geometry. There, the maximum residual gravity anomaly ranges between − 3 to − 4 mGal for the Aare valley, which is the main overdeepening of the region. Modelling shows that this corresponds to a depression, which reaches a depth of c. 300 m a.s.l. Farther downstream approaching Bern, the erosional trough narrows by c. 1 km, and the base gets shallower by c. 100 m as revealed by drillings. This is supported by the results of our gravity surveys, which disclose a lower maximum gravity effect
of c. − 0.8 to − 1.3 mGal. Interestingly, in the Bern city area, these shallow troughs with maximum gravity anomalies ranging from − 1.4 to − 1.8 mGal are underlain by one or multiple inner gorges, which are at least 100 m deep (based on drilling information) and only a few tens of meters wide (disclosed by gravity modelling). At the downstream end of the Bern area, we observe that the trough widens from 2 km at the northern border of Bern to c. 4 km approximately 2 km farther downstream, while the bottom still reaches c. 300 to 200 m a.s.l. Our gravity survey implies
that this change is associated with an increase in the maximum residual anomaly, reaching values of − 2.5 mGal. Interestingly, the overdeepening’s cross-sectional geometry in this area has steeply dipping flanks converging to a narrow base, which we consider as V-shaped. We attribute this shape to erosion by water either underneath or at the snout of a glacier, forming a gorge. This narrow bedrock depression was subsequently widened by glacial carving. In this context, strong glacial erosion upstream of the Bern area appears to have overprinted these traces. In contrast,
beneath the city of Bern and farther downstream these V-shaped features have been preserved. Available chronological data suggest that the formation of this gorge occurred prior to MIS 8 and possibly during the aftermath of one of the largest glaciations when large fluxes of meltwater resulted in the fluvial carving into the bedrock
From glacial erosion to basin overfill: a 240 m-thick overdeepening–fill sequence in Bern, Switzerland
We drilled a 210 m-thick succession of Quaternary sediments and extended it 30 m upsection with information that we collected from an adjacent outcrop. In the 240 m-thick succession we identified 12 different lithofacies, grouped them into five facies assemblages, and distinguished two major sedimentary sequences. A sharp contact at 103 m depth cuts off cross-beds in sequence A and separates them from the overlying horizontal beds in sequence B. Although the lowermost facies assemblage of each sequence includes a till deposited during a period of ice cover, the two tills differ from each other. In particular, the till at the base of sequence A is dominated by large clasts derived from the underlying Molasse bedrock, whereas the till at the base of sequence B has no such Molasse components. Furthermore, the till in sequence A bears evidence of glaciotectonic deformation. Both tills are overlain by thick assemblages of subaqueous, most likely glaciolacustrine and lacustrine facies elements. The cross-bedded and steeply inclined sand, gravel, and diamictic beds of sequence A are interpreted as deposits of density currents in a subaqueous ice-contact fan system within a proglacial lake. In contrast, the lacustrine sediments in sequence B are considered to record a less energetic environment where the material was most likely deposited in a prodelta setting that gradually developed into a delta plain. Towards the top, sequence B evolves into a fluvial system recorded in sequence C, when large sediment fluxes of a possibly advancing glacier resulted in a widespread cover of the region by a thick gravel unit. Feldspar luminescence dating on two samples from a sand layer at the top of sequence B provided uncorrected ages of 250.3 ± 80.2 and 251.3 ± 59.8 ka. The combination of these ages with lithostratigraphic correlations of sedimentary sequences encountered in neighboring scientific drillings suggests that sequence B was deposited between Marine Isotope Stage 8 (MIS 8; 300–243 ka) and MIS 7 (243–191 ka). This depositional age marks the end of one stage of overdeepening–fill in the perialpine Aare Valley near Bern
Palynological investigations reveal Eemian interglacial vegetation dynamics at Spiezberg, Bernese Alps, Switzerland
Interglacial pollen records are valuable archives of past vegetation dynamics and provide important information about vegetation responses to different-than-today climates. Interglacial pollen archives pre-dating the Last Glacial Maximum (LGM) are scarce on the Swiss Plateau in contrast to the many available Late Glacial and Holocene records. This is mainly due to the rapidly changing palaeo- environmental conditions throughout the Quaternary and the low preservation potential of material suitable for palynological investigations. The Spiezberg site offers a palynological record situated most proximal to the Alps in Switzerland. Previous investigations tentatively assigned this record to the Eemian interglacial (MIS 5e). We have conducted additional pollen analytical investigations to increase the quantity of pollen information. Besides biostratigraphic interpretations, we use numerical methods such as distance analysis (distantia) and ordination techniques (PCA) to evaluate the similarities and differences between the Spiezberg record and its geographically and chronostratigraphically closest physically dated (U/Th, luminescence) analogues from the Eemian (MIS 5e) and Meikirch 3 (MIS 7a) interglacials. Our palynological investigations reveal the predominance of closed temperate forests with abundant fir (Abies) and spruce (Picea) as well as evergreen broad-leaved taxa (e.g. Hedera). The attri- bution to the Eemian interglacial relies on the observation of very rare beech (Fagus) occurrences, a phase with prominent yew (Taxus) and the unimportance of hornbeam (Carpinus), all of which are typical Eemian features on the Swiss Plateau. An Eemian age is supported by the numerical comparison with the Beerenmo€sli (MIS 5e) and Meikirch 3 (MIS 7a) reference records. Furthermore, the Picea, Taxus and Fagus dynamics observed on the Swiss Plateau during the Eemian are in excellent agreement with vegetational patterns observed elsewhere in Central Europe. Surprisingly, Carpinus was almost absent on the Swiss Plateau during the Eemian, whereas it was a major component of the forest at other European sites with a similar elevation as Spiezberg. We explain this by environmental conditions and the strong competition with Abies alba. In particular, considering the European Eemian vegetation history and the results of our reconstructions from the Swiss Plateau, we find that Abies alba was a highly competitive tree under natural warmer-than-today conditions. This finding provides further evidence that Abies alba may benefit from future climate warming
Overdeepenings in the Swiss plateau: U-shaped geometries underlain by inner gorges
We investigated the mechanisms leading to the formation of tunnel valleys in the Swiss foreland near Bern. We proceeded through producing 3D maps of the bedrock topography based on drillhole information and a new gravimetric survey combined with modelling. In this context, the combination of information about the densities of the sedimentary fill and of the bedrock, together with published borehole data and the results of gravity surveys along 11 profiles across the valleys, served as input for the application of our 3D gravity modelling software referred to as PRISMA. This ultimately allowed us to model the gravity effect of the Quaternary fill of the overdeepenings and to produce cross-sectional geometries of these troughs. The results show that 2–3 km upstream of the city of Bern, the overdeepenings are approximately 3 km wide. They are characterized by steep to oversteepened lateral flanks and a wide flat base, which we consider as a U-shaped cross-sectional geometry. There, the maximum residual gravity anomaly ranges between − 3 to − 4 mGal for the Aare valley, which is the main overdeepening of the region. Modelling shows that this corresponds to a depression, which reaches a depth of c. 300 m a.s.l. Farther downstream approaching Bern, the erosional trough narrows by c. 1 km, and the base gets shallower by c. 100 m as revealed by drillings. This is supported by the results of our gravity surveys, which disclose a lower maximum gravity effect of c. − 0.8 to − 1.3 mGal. Interestingly, in the Bern city area, these shallow troughs with maximum gravity anomalies ranging from − 1.4 to − 1.8 mGal are underlain by one or multiple inner gorges, which are at least 100 m deep (based on drilling information) and only a few tens of meters wide (disclosed by gravity modelling). At the downstream end of the Bern area, we observe that the trough widens from 2 km at the northern border of Bern to c. 4 km approximately 2 km farther downstream, while the bottom still reaches c. 300 to 200 m a.s.l. Our gravity survey implies that this change is associated with an increase in the maximum residual anomaly, reaching values of − 2.5 mGal. Interestingly, the overdeepening’s cross-sectional geometry in this area has steeply dipping flanks converging to a narrow base, which we consider as V-shaped. We attribute this shape to erosion by water either underneath or at the snout of a glacier, forming a gorge. This narrow bedrock depression was subsequently widened by glacial carving. In this context, strong glacial erosion upstream of the Bern area appears to have overprinted these traces. In contrast, beneath the city of Bern and farther downstream these V-shaped features have been preserved. Available chronological data suggest that the formation of this gorge occurred prior to MIS 8 and possibly during the aftermath of one of the largest glaciations when large fluxes of meltwater resulted in the fluvial carving into the bedrock.ISSN:1661-8734ISSN:1661-872
Three-dimensional gravity modelling of a Quaternary overdeepening fill in the Bern area of Switzerland discloses two stages of glacial carving
The geometry of glacial overdeepenings on the Swiss Plateau close to Bern was inferred through a combination of gravity data with a 3D gravity modelling software. The target overdeepenings have depths between 155 and > 270Â m and widths between 860 and 2400Â m. The models show incisions characterized by U-shaped cross-sectional geometries and steep to over-steepened lateral flanks. Existing stratigraphic data reveals that the overdeepenings were formed and then filled during at least two glacial stages, which occurred during the Last Glacial Maximum (LGM) within the Marine Isotope Stage (MIS) 2, and possibly MIS 6 or before. The U-shaped cross-sectional geometries point towards glacial erosion as the main driver for the shaping of the overdeepenings. The combination of the geometries with stratigraphic data suggests that the MIS 6 (or older) glaciers deeply carved the bedrock, whereas the LGM ice sheet only widened the existing valleys but did not further deepen them. We relate this pattern to the different ice thicknesses, where a thicker MIS 6 ice was likely more powerful for wearing down the bedrock than a thinner LGM glacier. Gravity data in combination with forward modelling thus offers robust information on the development of a landscape formed through glaciers.ISSN:2045-232
Overdeepening or tunnel valley of the Aare glacier on the northern margin of the European Alps: Basins, riegels, and slot canyons
This work summarizes the results of an interdisciplinary project where we aimed to explore the origin of overdeepenings or tunnel valleys through a combination of a gravimetry survey, drillings, dating and a synthesis of previously published work. To this end, we focused on the Bern area, Switzerland, situated on the northern margin of the European Alps. In this region, multiple advances of piedmont glaciers during the Quaternary glaciations resulted in the carving of the main overdeepening of the Aare River valley (referred to as Aare main overdeepening). This bedrock depression is tens of km long and up to several hundreds of meters to a few kilometers wide. We found that in the Bern area, this main overdeepening is made up of two >200 m-deep troughs that are separated by a c. 5 km-long and up to 150 m-high transverse rocky ridge, interpreted as a riegel. The basins and the riegel are overlain by a >200 m- and 100 m-thick succession of Quaternary sediments, respectively. The bedrock itself is made up of a Late Oligocene to Early Miocene suite of consolidated clastic deposits, which are part of the Molasse foreland basin, whereas the Quaternary suite comprises a middle Pleistocene to Holocene succession of glacio-lacustrine gravel, sand and mud. A synthesis of published gravimetry data revealed that the upstream stoss side of the bedrock riegel is c. 50 % flatter than the downstream lee side. In addition, information from >100 deep drillings reaching depths >50 m suggests that the bedrock riegel is dissected by an anastomosing network of slot canyons. We propose that these canyons established the hydrological connection between the upstream and downstream basins during their formation. Based on published modelling results, we interpret that the riegels and canyons were formed through incision of subglacial meltwater during a glacier’s decay state, when large volumes of meltwater were released. Such a situation has repeatedly occurred since the Middle Pleistocene Transition approximately 800 ka ago, when large and erosive piedmont glaciers began to advance far into the foreland. This resulted in the deep carving of the inner-Alpine valleys, and additionally in the formation of overdeepenings on the plateau on the northern margin of the Alps