Remote Sensing of Snow Fields from Earth Satellites

Considerable effort has gone into snow line delineation using available satellite data. Furthermore, increasing emphasis is being put on automated extraction of such information and generation of a useable product for hydrologists. Implications are clear that the impact from future satellite and sensors systems will create an increased demand for computer processing before the data can be used by the hydrologist. If the coarse-resolution, broad spectral band data available from current satellites already create a demand by hydrologists for computer processing of the data, it is obvious there will be an even greater demand for computer analysis and evaluation when the future ERTS data become available

Readout system for radiation detector

Improved electrical circuit determines the amount of light detected by a photomultiplier tube when its output signal is in the dark-current range of the tube. The low-intensity light to which the tube responds arises from a thermo-luminescent ionized dosimeter

The Channeled Scabland

The geomorphology and hydrodynamics of high velocity flood erosion in the channeled scabland of the Columbia Basin are discussed

Solid state remote power controllers for 120 VDC power systems

Solid state remote power controllers can be applied to any dc power system up to 120 Vdc and distribute power up to 3.6 kW per hour. Devices have demonstrated total electrical efficiencies of 98.5 percent to 99.0 percent at rated load currents

A star camera aspect system suitable for use in balloon experiments

A balloon-borne experiment containing a star camera aspect system was designed, built, and flown. This system was designed to provide offset corrections to the magnetometer and inclinometer readings used to control an azimuth and elevation pointed experiment. The camera is controlled by a microprocessor, including commendable exposure and noise rejection threshold, as well as formatting the data for telemetry to the ground. As a background program, the microprocessor runs the aspect program to analyze a fraction of the pictures taken so that aspect information and offset corrections are available to the experiment in near real time. The analysis consists of pattern recognition of the star field with a star catalog in ROM memory and a least squares calculation. The performance of this system in ground based tests is described. It is part of the NASA/GSFC High Energy Gamma-Ray Balloon Instrument (2)

Exciton-polaron complexes in pulsed electrically-detected magnetic resonance

Several microscopic pathways have been proposed to explain the large magnetic effects observed in organic semiconductors, but identifying and characterising which microscopic process actually influences the overall magnetic field response is challenging. Pulsed electrically-detected magnetic resonance provides an ideal platform for this task as it intrinsically monitors the charge carriers of interest and provides dynamical information which is inaccessible through conventional magnetoconductance measurements. Here we develop a general time domain theory to describe the spin-dependent reaction of exciton-charge complexes following the coherent manipulation of paramagnetic centers through electron spin resonance. A general Hamiltonian is treated, and it is shown that the transition frequencies and resonance positions of the exciton-polaron complex can be used to estimate inter-species coupling. This work also provides a general formalism for analysing multi-pulse experiments which can be used to extract relaxation and transport rates

Observation of surface charge screening and Fermi level pinning on a synthetic, boron-doped diamond

Spectroscopic current-voltage (I-V) curves taken with a scanning tunneling microscope on a synthetic, boron-doped diamond single crystal indicate that the diamond, boiled in acid and baked to 500 °C in vacuum, does not exhibit ideal Schottky characteristics. These I-V curves taken in ultrahigh vacuum do not fit the traditional theory of thermionic emission; however, the deviation from ideal can be accounted for by charge screening at the diamond surface. At ambient pressure, the I-V curves have a sharp threshold voltage at 1.7 eV above the valence band edge indicating pinning of the Fermi energy. This measurement is in excellent agreement with the 1/3 band gap rule of Mead and Spitzer [Phys. Rev. 134, A713 (1964)]

A hydrogeomorphic approach to evaluating flood potential in central Texas from orbital and suborbital remote sensing imagery

There are no author-identified significant results in this report

Application of a helicopter mathematical model to the Langley differential maneuvering simulator for use in a helicopter/fighter evasive maneuver study

A real time simulation study was conducted using a differential maneuvering simulator to determine and evaluate helicopter evasive maneuvers when attacked by fighter aircraft. A general helicopter mathematical model was modified to represent an H-53 helicopter. The helicopter model was compared to H-53 flight test data to determine any differences between the simulated and actual vehicles. The simulated helicopter was also subjectively validated by participating pilots. Two fighter mathematical models validated in previous studies were utilized for the attacking aircraft. The results of this simulation study have been verified in a flight test program conducted by the U. S. Air Force and were found to closely match the flight results

A generalized vortex lattice method for subsonic and supersonic flow applications

If the discrete vortex lattice is considered as an approximation to the surface-distributed vorticity, then the concept of the generalized principal part of an integral yields a residual term to the vorticity-induced velocity field. The proper incorporation of this term to the velocity field generated by the discrete vortex lines renders the present vortex lattice method valid for supersonic flow. Special techniques for simulating nonzero thickness lifting surfaces and fusiform bodies with vortex lattice elements are included. Thickness effects of wing-like components are simulated by a double (biplanar) vortex lattice layer, and fusiform bodies are represented by a vortex grid arranged on a series of concentrical cylindrical surfaces. The analysis of sideslip effects by the subject method is described. Numerical considerations peculiar to the application of these techniques are also discussed. The method has been implemented in a digital computer code. A users manual is included along with a complete FORTRAN compilation, an executed case, and conversion programs for transforming input for the NASA wave drag program