7,138 research outputs found

    Building Design and Construction over Organic Soil

    Get PDF
    A lowrise office building was constructed on a mat foundation over a thick peat deposit that had been preconsolidated beneath surface fill. Environmental restrictions prevented use of deep foundations for fear that penetration through an aquaclude would permit contamination of a deeper water table. This paper describes the laboratory testing and field instrumentation programs, as well as the special geotechnical and structural analysis undertaken for the design and construction of this project. Included in the program were long-term consolidation tests, pressuremeter tests, use of heave markers, inclinometers and pore pressure piezometers. A site history was also developed to define the extent and nature of the surficial fill. To achieve much of the anticipated initial settlement, the basement was temporarily flooded, thus preloading with the full building weight. Water was removed as construction proceeded so that the full building weight was always maintained. Actual settlement was observed to agree fairly well with predicted settlements

    Unexpected Caisson Problems, Soil Structure Interaction Predictions and Required Ground Modification

    Get PDF
    Recent advances in strain measurement using optical fibers provide new opportunities for monitoring the performance of geotechnical structures during and after construction. Brillouin optical time-domain reflectometry (BOTDR) is an innovative technique that allows measurement of full strain profiles using standard optical fibers. In this paper, two case studies illustrating the application of the distributed optical fiber strain sensors are presented. One is monitoring of an old masonry tunnel when a new tunnel was constructed nearby and the other is monitoring the behavior of secant piled walls for basement construction. Both sites are located in London. The advantages and limitations of this new sensor technology for monitoring geotechnical structures are discussed. The paper describes the caisson construction problems encountered and the required modification necessary for a 55-story residential high-rise in Chicago’s near north side. Belled caissons were planned on a very thin hardpan bearing layer which was underlain by water bearing dense silt that extended to dolomite bedrock. Three filtered dewatering wells extending into the fractured rock surface were planned to reduce the hydrostatic pressure head within the silt to permit the belled construction. A complete collapse of the dense silt layer during the installation of the first dewatering well undermined the planned belled caisson foundation system. An additional subsurface investigation, a compaction grouting program and further in-situ pressuremeter testing was then performed. Subsequent modified performance predictions required the addition of selective micropile underpinning after completion of the planned system of grade beams and belled caisson installation. Settlement monitoring during building construction confirmed settlements within or less than the predicted settlement range

    Improved Quantum Hard-Sphere Ground-State Equations of State

    Full text link
    The London ground-state energy formula as a function of number density for a system of identical boson hard spheres, corrected for the reduced mass of a pair of particles in a sphere-of-influence picture, and generalized to fermion hard-sphere systems with two and four intrinsic degrees of freedom, has a double-pole at the ultimate \textit{regular} (or periodic, e.g., face-centered-cubic) close-packing density usually associated with a crystalline branch. Improved fluid branches are contructed based upon exact, field-theoretic perturbation-theory low-density expansions for many-boson and many-fermion systems, appropriately extrapolated to intermediate densities, but whose ultimate density is irregular or \textit{random} closest close-packing as suggested in studies of a classical system of hard spheres. Results show substantially improved agreement with the best available Green-function Monte Carlo and diffusion Monte Carlo simulations for bosons, as well as with ladder, variational Fermi hypernetted chain, and so-called L-expansion data for two-component fermions.Comment: 15 pages and 7 figure

    Complexity and Inapproximability Results for Parallel Task Scheduling and Strip Packing

    Full text link
    We study the Parallel Task Scheduling problem PmsizejCmaxPm|size_j|C_{\max} with a constant number of machines. This problem is known to be strongly NP-complete for each m5m \geq 5, while it is solvable in pseudo-polynomial time for each m3m \leq 3. We give a positive answer to the long-standing open question whether this problem is strongly NPNP-complete for m=4m=4. As a second result, we improve the lower bound of 1211\frac{12}{11} for approximating pseudo-polynomial Strip Packing to 54\frac{5}{4}. Since the best known approximation algorithm for this problem has a ratio of 43+ε\frac{4}{3} + \varepsilon, this result narrows the gap between approximation ratio and inapproximability result by a significant step. Both results are proven by a reduction from the strongly NPNP-complete problem 3-Partition

    A novel thiol-labile cysteine protecting group for peptide synthesis based on a pyridazinedione (PD) scaffold

    Get PDF
    Herein we report a thiol-labile cysteine protecting group based on an unsaturated pyridazinedione (PD) scaffold. We establish compatibility of the PD in conventional solid phase peptide synthesis (SPPS), showcasing this in the on-resin synthesis of biologically relevant oxytocin. Furthermore, we establish the applicability of the PD protecting group towards both microwave-assisted SPPS and native chemical ligation (NCL) in a model system

    Thermodynamics of low dimensional spin-1/2 Heisenberg ferromagnets in an external magnetic field within Green function formalism

    Full text link
    The thermodynamics of low dimensional spin-1/2 Heisenberg ferromagnets (HFM) in an external magnetic field is investigated within a second-order two-time Green function formalism in the wide temperature and field range. A crucial point of the proposed scheme is a proper account of the analytical properties for the approximate transverse commutator Green function obtained as a result of the decoupling procedure. A good quantitative description of the correlation functions, magnetization, susceptibility, and heat capacity of the HFM on a chain, square and triangular lattices is found for both infinite and finite-sized systems. The dependences of the thermodynamic functions of 2D HFM on the cluster size are studied. The obtained results agree well with the corresponding data found by Bethe ansatz, exact diagonalization, high temperature series expansions, and quantum Monte Carlo simulations.Comment: 11 pages, 14 figure

    One-pot thiol–amine bioconjugation to maleimides: simultaneous stabilisation and dual functionalisation

    Get PDF
    Maleimide chemistry is widely used in the site-selective modification of proteins. However, hydrolysis of the resultant thiosuccinimides is required to provide robust stability to the bioconjugates. Herein, we present an alternative approach that affords simultaneous stabilisation and dual functionalisation in a one pot fashion. By consecutive conjugation of a thiol and an amine to dibromomaleimides, we show that aminothiomaleimides can be generated extremely efficiently. Furthermore, the amine serves to deactivate the electrophilicity of the maleimide, precluding further reactivity and hence generating stable conjugates. We have applied this conjugation strategy to peptides and proteins to generate stabilised trifunctional conjugates. We propose that this stabilisation-dual modification strategy could have widespread use in the generation of diverse conjugates

    Families of Graphs with W_r({G},q) Functions That Are Nonanalytic at 1/q=0

    Full text link
    Denoting P(G,q)P(G,q) as the chromatic polynomial for coloring an nn-vertex graph GG with qq colors, and considering the limiting function W({G},q)=limnP(G,q)1/nW(\{G\},q) = \lim_{n \to \infty}P(G,q)^{1/n}, a fundamental question in graph theory is the following: is Wr({G},q)=q1W({G},q)W_r(\{G\},q) = q^{-1}W(\{G\},q) analytic or not at the origin of the 1/q1/q plane? (where the complex generalization of qq is assumed). This question is also relevant in statistical mechanics because W({G},q)=exp(S0/kB)W(\{G\},q)=\exp(S_0/k_B), where S0S_0 is the ground state entropy of the qq-state Potts antiferromagnet on the lattice graph {G}\{G\}, and the analyticity of Wr({G},q)W_r(\{G\},q) at 1/q=01/q=0 is necessary for the large-qq series expansions of Wr({G},q)W_r(\{G\},q). Although WrW_r is analytic at 1/q=01/q=0 for many {G}\{G\}, there are some {G}\{G\} for which it is not; for these, WrW_r has no large-qq series expansion. It is important to understand the reason for this nonanalyticity. Here we give a general condition that determines whether or not a particular Wr({G},q)W_r(\{G\},q) is analytic at 1/q=01/q=0 and explains the nonanalyticity where it occurs. We also construct infinite families of graphs with WrW_r functions that are non-analytic at 1/q=01/q=0 and investigate the properties of these functions. Our results are consistent with the conjecture that a sufficient condition for Wr({G},q)W_r(\{G\},q) to be analytic at 1/q=01/q=0 is that {G}\{G\} is a regular lattice graph Λ\Lambda. (This is known not to be a necessary condition).Comment: 22 pages, Revtex, 4 encapsulated postscript figures, to appear in Phys. Rev.

    Corrections to scaling in 2--dimensional polymer statistics

    Full text link
    Writing =AN2ν(1+BNΔ1+CN1+...) = AN^{2\nu}(1+BN^{-\Delta_1}+CN^{-1}+ ...) for the mean square end--to--end length of a self--avoiding polymer chain of NN links, we have calculated Δ1\Delta_1 for the two--dimensional {\em continuum} case from a new {\em finite} perturbation method based on the ground state of Edwards self consistent solution which predicts the (exact) ν=3/4\nu=3/4 exponent. This calculation yields Δ1=1/2\Delta_1=1/2. A finite size scaling analysis of data generated for the continuum using a biased sampling Monte Carlo algorithm supports this value, as does a re--analysis of exact data for two--dimensional lattices.Comment: 10 pages of RevTex, 5 Postscript figures. Accepted for publication in Phys. Rev. B. Brief Reports. Also submitted to J. Phys.
    corecore