6,220 research outputs found

    An asymptotic theory for the re-equilibration of a micellar surfactant solution

    Get PDF
    Micellar surfactant solutions are characterized by a distribution of aggregates comprised predominantly of pre-micellar aggregates (monomers, dimers, trimers, etc.) and a region of proper micelles close to the peak aggregation number, connected by an intermediate region containing a very low concentration of aggregates. Such a distribution gives rise to a distinct two-timescale re-equilibration following a system dilution, known as the 1 and 2 processes, whose dynamics may be described by the Becker–Döring equations. We use a continuum version of these equations to develop a reduced asymptotic description that elucidates the behavior during each of these processes

    On the predictions and limitations of the BeckerDoring model for reaction kinetics in micellar surfactant solutions

    Get PDF
    We investigate the breakdown of a system of micellar aggregates in a surfactant solution following an order-one dilution. We derive a mathematical model based on the Becker–Döring system of equations, using realistic expressions for the reaction constants fit to Molecular Dynamics simulations. We exploit the largeness of typical aggregation numbers to derive a continuum model, substituting a large system of ordinary differential equations for a partial differential equation in two independent variables: time and aggregate size. Numerical solutions demonstrate that re-equilibration occurs in two distinct stages over well-separated time-scales, in agreement with experiment and with previous theories. We conclude by exposing a limitation in the Becker–Döring theory for re-equilibration and discuss potential resolutions

    Dynamics of perpendicular recording heads

    Get PDF
    3D modeling and inductance measurements were used to design an ultra-high frequency perpendicular system. Kerr microscopy and spin-stand experiments with focused ion beam (FI-B) trimmed perpendicular heads and perpendicular media directly verified the high frequency concepts

    Experiment K-6-09. Morphological and biochemical investigation of microgravity-induced nerve and muscle breakdown. Part 1: Investigation of nerve and muscle breakdown during spaceflight; Part 2: Biochemical analysis of EDL and PLT muscles

    Get PDF
    The present findings on rat hindlimb muscles suggest that skeletal muscle weakness induced by prolonged spaceflight can result from a combination of muscle fiber atrophy, muscle fiber segmental necrosis, degeneration of motor nerve terminals and destruction of microcirculatory vessels. Damage was confined to the red adductor longus (AL) and soleus muscles. The midbelly region of the AL muscle had more segmental necrosis and edema than the ends. Macrophages and neutrophils were the major mononucleated cells infiltrating and phagocytosing the cellular debris. Toluidine blue-positive mast cells were significantly decreased in Flight AL muscles compared to controls; this indicated that degranulation of mast cells contributed to tissue edema. Increased ubiquitination of disrupted myofibrils may have promoted myofilament degradation. Overall, mitochondria content and SDH activity were normal, except for a decrease in the subsarcolemmal region. The myofibrillar ATPase activity shifted toward the fast type in the Flight AL muscles. Some of the pathological changes may have occurred or been exacerbated during the 2 day postflight period of readaptation to terrestrial gravity. While simple atrophy should be reversible by exercise, restoration of pathological changes depends upon complex processes of regeneration by stem cells. Initial signs of muscle and nerve fiber regeneration were detected. Even though regeneration proceeds on Earth, the space environment may inhibit repair and cause progressive irreversible deterioration during long term missions. Muscles obtained from Flight rats sacrificed immediately (within a few hours) after landing are needed to distinguish inflight changes from postflight readaptation

    The structure of causal sets

    Get PDF
    More often than not, recently popular structuralist interpretations of physical theories leave the central concept of a structure insufficiently precisified. The incipient causal sets approach to quantum gravity offers a paradigmatic case of a physical theory predestined to be interpreted in structuralist terms. It is shown how employing structuralism lends itself to a natural interpretation of the physical meaning of causal sets theory. Conversely, the conceptually exceptionally clear case of causal sets is used as a foil to illustrate how a mathematically informed rigorous conceptualization of structure serves to identify structures in physical theories. Furthermore, a number of technical issues infesting structuralist interpretations of physical theories such as difficulties with grounding the identity of the places of highly symmetrical physical structures in their relational profile and what may resolve these difficulties can be vividly illustrated with causal sets.Comment: 19 pages, 4 figure

    Flow Coupling Effects in Jet-in-Crossflow Flowfields

    Get PDF
    The combustor designer is typically required to design liner orifices that effectively mix air jets with crossflow effluent. CFD combustor analysis is typically used in the design process; however the jets are usually assumed to enter the combustor with a uniform velocity and turbulence profile. The jet-mainstream flow coupling is usually neglected because of the computational expense. This CFD study was performed to understand the effect of jet-mainstream flow coupling, and to assess the accuracy of jet boundary conditions that are commonly used in combustor internal calculations. A case representative of a plenum-fed quick-mix section of a Rich Burn/Quick Mix/Lean Burn combustor (i.e. a jet-mainstream mass-flow ratio of about 3 and a jet-mainstream momentum-flux ratio of about 30) was investigated. This case showed that the jet velocity entering the combustor was very non-uniform, with a low normal velocity at the leading edge of the orifice and a high normal velocity at the trailing edge of the orifice. Three different combustor-only cases were analyzed with uniform inlet jet profile. None of the cases matched the plenum-fed calculations. To assess liner thickness effects, a thin-walled case was also analyzed. The CFD analysis showed the thin-walled jets had more penetration than the thick-walled jets

    Mixing of Multiple Jets With a Confined Subsonic Crossflow

    Get PDF
    This paper summarizes experimental and computational results on the mixing of opposed rows of jets with a confined subsonic crossflow in rectangular ducts. The studies from which these results were excerpted investigated flow and geometric variations typical of the complex 3-D flowfield in the combustion chambers in gas turbine engines. The principal observation was that the momentum-flux ratio, J, and the orifice spacing, S/H, were the most significant flow and geometric variables. Jet penetration was critical, and penetration decreased as either momentum-flux ratio or orifice spacing decreased. It also appeared that jet penetration remained similar with variations in orifice size, shape, spacing, and momentum-flux ratio when the orifice spacing was inversely proportional to the square-root of the momentum-flux ratio. It was also seen that planar averages must be considered in context with the distributions. Note also that the mass-flow ratios and the offices investigated were often very large (jet-to-mainstream mass-flow ratio greater than 1 and the ratio of orifices-area-to-mainstream-cross-sectional-area up to 0.5 respectively), and the axial planes of interest were often just downstream of the orifice trailing edge. Three-dimensional flow was a key part of efficient mixing and was observed for all configurations

    Performance, Nutrient Digestibility, and Meat Quality of Bali Cattle Fed a Ration Supplemented with Soybean Oil Calcium Soap and Cashew Fruit Flour

    Get PDF
    The study to evaluate growth performance, nutrient digestibility, blood metabolites profile and meat fatty acid of Bali cattle treated with 3 different types of rations were conducted using a completely randomized block design with 4 replications. Ration treatments were R1: 40% native grass (NG) + 60% concentrate, R2: 40% NG + 60% concentrate supplemented with 5% soybean oil calcium soap (SOCS), and R3: (40% NG + 60% concentrate supplemented with 5% SOCS + 10% cashew fruit flour (CFF). Variables measured were growth performance, nutrients digestibility, blood metabolites, and meat fatty acid profile. Data were analyzed using analysis of variance (ANOVA) and the differences between treatment means were examined by Duncan Multiple Range Test. Results of the study showed that the 3 different feed treatments did not have any significant effect on dry matter intake and organic matter intake, daily body weight gain, feed efficiency, crude fiber, ADF and NDF digestibilities, cholesterol, triglycerides, low density lipoprotein (LDL), high density lipoprotein (HDL), total fatty acid contents and content of unsaturated and saturated meat fatty  acids of Bali cattle meat. Different treatment rations also did not affect dry matter digestibility, however the treatments significantly affect the organic matter, crude protein, and fat digestibility (P<0.05). Bali cattle fed 5% SOCS (R2) and 5% SOCS + 10% CFF (R3) had higher organic matter and ether extract digestibilities and linoleic acid content of meat (P<0.05) compared with the control (R1). The Bali cattle fed with R1 and R2 had higher crude protein digestibility (P<0.05) compared with that of R3. It is concluded that the supplementation of 5% SOCS and 10% CFF in the ration improved the digestibility of organic matter, ether extract and linoleic fatty acids content in Bali cattle meat

    D-branes in PP-Waves and Massive Theories on Worldsheet with Boundary

    Get PDF
    We investigate the supersymmetric D-brane configurations in the pp-wave backgrounds proposed by Maldacena and Maoz. We study the surviving supersymmetry in a D-brane configuration from the worldvolume point of view. When we restrict ourselves to the background with N=(2,2) supersymmetry and no holomorphic Killing vector term, there are two types of supersymmetric D-branes: A-type and B-type. An A-type brane is wrapped on a special Lagrangian submanifold, and the imaginary part of the superpotential should be constant on its worldvolume. On the other hand, a B-type brane is wrapped on a complex submanifold, and the superpotential should be constant on its worldvolume. The results are almost consistent with the worldsheet theory in the lightcone gauge. The inclusion of gauge fields is also discussed and found BPS D-branes with the gauge field excitations. Furthermore, we consider the backgrounds with holomorphic Killing vector terms and N=(1,1) supersymmetric backgrounds.Comment: 27 pages, LaTeX, no figure. v2: typos corrected, comments added, references added. v3: typos corrected, comments added, references added. v4:typos correcte
    • …
    corecore