30,737 research outputs found
Rotorcraft digital advanced avionics system (RODAAS) functional description
A functional design of a rotorcraft digital advanced avionics system (RODAAS) to transfer the technology developed for general aviation in the Demonstration Advanced Avionics System (DAAS) program to rotorcraft operation was undertaken. The objective was to develop an integrated avionics system design that enhances rotorcraft single pilot IFR operations without increasing the required pilot training/experience by exploiting advanced technology in computers, busing, displays and integrated systems design. A key element of the avionics system is the functionally distributed architecture that has the potential for high reliability with low weight, power and cost. A functional description of the RODAAS hardware and software functions is presented
Defect Formation and Kinetics of Atomic Terrace Merging
Pairs of atomic scale terraces on a single crystal metal surface can be made
to merge controllably under suitable conditions to yield steps of double height
and width. We study the effect of various physical parameters on the formation
of defects in a kinetic model of step doubling. We treat this manifestly non-
equilibrium problem by mapping the model onto a 1-D random sequential
adsorption problem and solving this analytically. We also do simulations to
check the validity of our treatment. We find that our treatment effectively
captures the dynamic evolution and the final state of the surface morphology.
We show that the number and nature of the defects formed is controlled by a
single dimensionless parameter . For close to one we show that the
fraction of defects rises linearly with as . We also show that one can arrive at the final state faster and with
fewer defects by changing the parameter with time.Comment: 17 pages, 8 figures. To be submitted to Phys. Rev.
Dynamics and Steady States in excitable mobile agent systems
We study the spreading of excitations in 2D systems of mobile agents where
the excitation is transmitted when a quiescent agent keeps contact with an
excited one during a non-vanishing time. We show that the steady states
strongly depend on the spatial agent dynamics. Moreover, the coupling between
exposition time () and agent-agent contact rate (CR) becomes crucial to
understand the excitation dynamics, which exhibits three regimes with CR: no
excitation for low CR, an excited regime in which the number of quiescent
agents (S) is inversely proportional to CR, and for high CR, a novel third
regime, model dependent, here S scales with an exponent , with
being the scaling exponent of with CR
GRID2D/3D: A computer program for generating grid systems in complex-shaped two- and three-dimensional spatial domains. Part 2: User's manual and program listing
An efficient computer program, called GRID2D/3D, was developed to generate single and composite grid systems within geometrically complex two- and three-dimensional (2- and 3-D) spatial domains that can deform with time. GRID2D/3D generates single grid systems by using algebraic grid generation methods based on transfinite interpolation in which the distribution of grid points within the spatial domain is controlled by stretching functions. All single grid systems generated by GRID2D/3D can have grid lines that are continuous and differentiable everywhere up to the second-order. Also, grid lines can intersect boundaries of the spatial domain orthogonally. GRID2D/3D generates composite grid systems by patching together two or more single grid systems. The patching can be discontinuous or continuous. For continuous composite grid systems, the grid lines are continuous and differentiable everywhere up to the second-order except at interfaces where different single grid systems meet. At interfaces where different single grid systems meet, the grid lines are only differentiable up to the first-order. For 2-D spatial domains, the boundary curves are described by using either cubic or tension spline interpolation. For 3-D spatial domains, the boundary surfaces are described by using either linear Coon's interpolation, bi-hyperbolic spline interpolation, or a new technique referred to as 3-D bi-directional Hermite interpolation. Since grid systems generated by algebraic methods can have grid lines that overlap one another, GRID2D/3D contains a graphics package for evaluating the grid systems generated. With the graphics package, the user can generate grid systems in an interactive manner with the grid generation part of GRID2D/3D. GRID2D/3D is written in FORTRAN 77 and can be run on any IBM PC, XT, or AT compatible computer. In order to use GRID2D/3D on workstations or mainframe computers, some minor modifications must be made in the graphics part of the program; no modifications are needed in the grid generation part of the program. The theory and method used in GRID2D/3D is described
GRID2D/3D: A computer program for generating grid systems in complex-shaped two- and three-dimensional spatial domains. Part 1: Theory and method
An efficient computer program, called GRID2D/3D was developed to generate single and composite grid systems within geometrically complex two- and three-dimensional (2- and 3-D) spatial domains that can deform with time. GRID2D/3D generates single grid systems by using algebraic grid generation methods based on transfinite interpolation in which the distribution of grid points within the spatial domain is controlled by stretching functions. All single grid systems generated by GRID2D/3D can have grid lines that are continuous and differentiable everywhere up to the second-order. Also, grid lines can intersect boundaries of the spatial domain orthogonally. GRID2D/3D generates composite grid systems by patching together two or more single grid systems. The patching can be discontinuous or continuous. For continuous composite grid systems, the grid lines are continuous and differentiable everywhere up to the second-order except at interfaces where different single grid systems meet. At interfaces where different single grid systems meet, the grid lines are only differentiable up to the first-order. For 2-D spatial domains, the boundary curves are described by using either cubic or tension spline interpolation. For 3-D spatial domains, the boundary surfaces are described by using either linear Coon's interpolation, bi-hyperbolic spline interpolation, or a new technique referred to as 3-D bi-directional Hermite interpolation. Since grid systems generated by algebraic methods can have grid lines that overlap one another, GRID2D/3D contains a graphics package for evaluating the grid systems generated. With the graphics package, the user can generate grid systems in an interactive manner with the grid generation part of GRID2D/3D. GRID2D/3D is written in FORTRAN 77 and can be run on any IBM PC, XT, or AT compatible computer. In order to use GRID2D/3D on workstations or mainframe computers, some minor modifications must be made in the graphics part of the program; no modifications are needed in the grid generation part of the program. This technical memorandum describes the theory and method used in GRID2D/3D
A Dual Read-Out Assay to Evaluate the Potency of Compounds Active against Mycobacterium tuberculosis
PMCID: PMC3617142This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
Solution of an infection model near threshold
We study the Susceptible-Infected-Recovered model of epidemics in the
vicinity of the threshold infectivity. We derive the distribution of total
outbreak size in the limit of large population size . This is accomplished
by mapping the problem to the first passage time of a random walker subject to
a drift that increases linearly with time. We recover the scaling results of
Ben-Naim and Krapivsky that the effective maximal size of the outbreak scales
as , with the average scaling as , with an explicit form for
the scaling function
- …