67 research outputs found
Fabrication of cellulose fine fiber based membranes embedded with silver nanoparticles via Forcespinning
This study presents the successful development of cellulose fiber based membranes embedded with silver nanoparticles. These fine fiber membranes were developed utilizing the Forcespinning (FS) technique followed by alkaline hydrolysis treatment. The fiber morphology, homogeneity and yield were optimized by varying spinning parameters such as polymer concentration and angular velocity of the spinnerets. The structure, thermal and mechanical properties, and water absorption capability of the developed membranes were investigated. The cellulose acetate (CA) present in the membrane was converted to cellulose in the presence of embedded silver nanoparticles by alkaline hydrolysis. The silver nanoparticles embedded cellulose membrane exhibits outstanding water absorption capacity with fast uptake rate. Its high porosity, three-dimensional network structure with wellinterconnected pores, as well as the intrinsically highly hydrophilic nature of cellulose material greatly favor its potential application as wound dressings. The antimicrobial activity was evaluated by the disk diffusion method. The composite membranes exhibit excellent antimicrobial activity against Gram-negative bacteria Escherichia coli and Pseudomonas aeruginosa, and Gram-positive Staphylococcus aureus, owing to the slow and sustained release of embedded silver nanoparticles
Targeted Next Generation Sequencing Revealed a Novel Homozygous Loss-of-Function Mutation in ILDR1 Gene Causes Autosomal Recessive Nonsyndromic Sensorineural Hearing Loss in a Chinese Family
Hereditary hearing impairment is one of the major and common birth defects in Chinese population. Non-syndromic sensorineural hearing loss (NSHL) is the most common types of hereditary hearing impairment. Genotypically and phenotypically NSHL is extremely heterogenous and follow either autosomal dominant or autosomal recessive or X-linked mode of inheritance. Presently, 127 genes have been identified to be associated with both syndromic and (NSHL). Here, we studied a Chinese family with moderate and profound hearing impairment. The proband is a 30-year old Chinese man. The proband was born with normal hearing and at the age of 5-years, the proband was first noticed with hearing impairment. Gradually and progressively the proband was presented with loss of hearing in his both right and left ears at the age of 30 years. The clinical symptoms, age of onset or progression to loss of hearing was similar in both the proband and his younger brother. The proband’s parents are phenotypically normal and non-consanguineous. Clinical diagnosis of the proband and his younger brother has been done by classical pure tone audiogram (PTA). Computed Tomography (CT) found no abnormality in bilateral external ear, middle ear and inner ear. Targeted next generation sequencing was performed with a panel of 127 genes reported to be associated with hereditary hearing impairment. A novel homozygous single nucleotide deletion (c.427delT) in exon 4 of ILDR1 gene has been identified in proband and in his younger brother. Sanger sequencing confirmed that proband’s father and mother are carrying this mutation in a heterozygous manner. This mutation has not been identified in 100 normal healthy control individuals. This mutation (c.427delT) causes frameshift (p.Tyr143Ilefs∗19) which leads to the formation of a truncated ILDR1 protein of 162 amino acids instead of the wild type ILDR1 protein of 546 amino acids. ILDR1 associated hereditary hearing impairment is very rare and this is the first report of identifying a loss-of-function mutation in ILDR1 gene associated with hereditary hearing impairment in Chinese population. Our present study also emphasized the significance of rapid, accurate and cost-effective screening for the patient with hereditary hearing impairment by targeted next generation sequencing
Differential Expression of Rubisco in Sporophytes and Gametophytes of Some Marine Macroalgae
Rubisco (ribulose-1, 5-bisphosphate carboxylase/oxygenase), a key enzyme of photosynthetic CO2 fixation, is one of the most abundant proteins in both higher plants and algae. In this study, the differential expression of Rubisco in sporophytes and gametophytes of four seaweed species — Porphyra yezoensis, P. haitanensis, Bangia fuscopurpurea (Rhodophyte) and Laminaria japonica (Phaeophyceae) — was studied in terms of the levels of transcription, translation and enzyme activity. Results indicated that both the Rubisco content and the initial carboxylase activity were notably higher in algal gametophytes than in the sporophytes, which suggested that the Rubisco content and the initial carboxylase activity were related to the ploidy of the generations of the four algal species
Multiscale modelling and simulation of single crystal superalloy turbine blade casting during directional solidification process
As the key parts of an aero-engine, single crystal (SX) superalloy turbine blades have been the focus of much attention. However, casting defects often occur during the manufacturing process of the SX turbine blades. Modeling and simulation technology can help to optimize the manufacturing process of SX blades. Multiscale coupled models were proposed and used to simulate the physical phenomena occurring during the directional solidification (DS) process. Coupled with heat transfer (macroscale) and grain growth (meso-scale), 3D dendritic grain growth was calculated to show the competitive grain growth at micro-scale. SX grain selection behavior was studied by the simulation and experiments. The results show that the geometrical structure and technical parameters had strong influences on the grain selection effectiveness. Based on the coupled models, heat transfer, grain growth and microstructure evolution of a complex hollow SX blade were simulated. Both the simulated and experimental results show that the stray grain occurred at the platform of the SX blade when a constant withdrawal rate was used in manufacturing process. In order to avoid the formation of the stray crystal, the multi-scale coupled models and the withdrawal rate optimized technique were applied to the same SX turbine blade. The modeling results indicated that the optimized variable withdrawal rate can achieve SX blade castings with no stray grains, which was also proved by the experiments
Development of hierarchical structured carbon nanotube-nylon nanofiber mats
A hierarchical nanofiber (NF) structure featuring carbon nanotubes (CNTs) densely attached on the surface of NFs is presented. Nonwoven NF mats made of Nylon 6 (Nylon) were mass produced using the forcespinning® (FS) technology, followed by depositing functionalized CNTs (f-CNTs) on the surface of NFs. Strong interfacial adhesion between CNTs and Nylon NFs was developed by the formation of covalent bonds. The morphology, structure, conductivity, and mechanical properties of the developed CNT-Nylon NFs were analyzed. The hierarchical NFs have a 338% improvement in tensile strength without compromising its strain at break. The shielding effectiveness (SE) of electromagnetic interference (EMI) was recorded to be 30 dB. These promising characteristics endow novel flexible hierarchical NF mats for applications as EMI shielding materials or smart textiles to mention some
Numerical Simulation and Optimization of Directional Solidification Process of Single Crystal Superalloy Casting
The rapid development of numerical modeling techniques has led to more accurate results in modeling metal solidification processes. In this study, the cellular automaton-finite difference (CA-FD) method was used to simulate the directional solidification (DS) process of single crystal (SX) superalloy blade samples. Experiments were carried out to validate the simulation results. Meanwhile, an intelligent model based on fuzzy control theory was built to optimize the complicate DS process. Several key parameters, such as mushy zone width and temperature difference at the cast-mold interface, were recognized as the input variables. The input variables were functioned with the multivariable fuzzy rule to get the output adjustment of withdrawal rate (v) (a key technological parameter). The multivariable fuzzy rule was built, based on the structure feature of casting, such as the relationship between section area, and the delay time of the temperature change response by changing v, and the professional experience of the operator as well. Then, the fuzzy controlling model coupled with CA-FD method could be used to optimize v in real-time during the manufacturing process. The optimized process was proven to be more flexible and adaptive for a steady and stray-grain free DS process
Mass production of carbon nanotube-reinforced polyacrylonitrile fine composite fibers
A facile and large-scale production method of polyacrylonitrile (PAN) fibers and carboxyl functionalized carbon nanotube reinforced PAN composite fibers was demonstrated by the use of Forcespinning® technology. The developed polymeric fibers and carbon nanotube-reinforced composite fibers were subsequently carbonized to obtain carbon fiber systems. Analysis of the fiber diameter, homogeneity, alignment of carbon nanotube and bead formation was conducted with scanning electron microscopy. Thermogravimetric analysis, electrical, and mechanical characterization were also conducted. Raman and FTIR analyses of the developed fiber systems indicate interactions between carbon nanotubes and the carbonized PAN fibers through π–π stacking. The carbonized carbon nanotube-reinforced PAN composite fibers possess promising applications in energy storage applications
The effectiveness and safety of tranexamic acid in primary total knee arthroplasty between topical intra-articular and intravenous, a meta-analysis
- …