Observation of EGRET Gamma-Ray Sources by an Extensive Air Shower Experiment

Ultra-high-energy (E$>$100 Tev) Extensive Air Showers (EASs) have been monitored for a period of five years (1997 - 2003), using a small array of scintillator detectors in Tehran, Iran. The data have been analyzed to take in to account of the dependence of source counts with respect to the zenith angle. During a calendar year different sources come in the field of view of the detector at varying zenith angles. Because of varying thickness of the overlaying atmosphere, the shower count rate is extremely dependent on zenith angle which have been carefully analyzed over time. High energy gamma-ray sources from EGRET third catalogue where observed and the data were analyzed using an excess method. A number of upper limits for a number of EGRET sources were obtained, including 6 AGNs or probably AGNs and 4 unidentified sources.Comment: 14 pages, 8 figures, Astronomy and Astrophysics, accepte

A Study on anisotropy of cosmic ray distribution with a small array of water-cherenkov detectors

The study of the anisotropy of the arrival directions is an essential tool to investigate the origin and propagation of cosmic rays primaries. A simple way of recording many cosmic rays is to record coincidences between a number of detectors. We have monitored multi-TeV cosmic rays by a small array of water cherenkov detectors in Tehran(35 43 N, 51 20 E, 1200m a.s.l). More than 1.1*10^6 extensive air shower events were recorded. In addition to the Compton- Getting effect due to the motion of the earth in the Galaxy, an anisotropy has been observed which is due to a unidirectional anisotropy of cosmic ray flow along the Galactic arms.Comment: 16 pages 9 figs and one tabl

Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

Abstract. In this article, the effect of nano-clay particles and heat-treating on thermo-mechanical fatigue (TMF) behaviors and failures of piston aluminum-silicon (AlSi) alloys was investigated. For this purpose, thermo-mechanical fatigue tests were conducted under out-of-phase (OP) loading conditions. Two loading conditions were checked based on different maximum temperatures (250, 300, and 350 °C) and various thermo-mechanical loading factors (100, 125, and 150%). The minimum temperature was constant in all tests at 50 °C under a heating/cooling rate of 10 °C/s and a dwell time of 5 s. Results showed that the nano-composites had a longer fatigue lifetime, at least 2 times higher, compared to the Al alloy, when the maximum temperature was 250 °C and the thermo-mechanical loading factor was 100%. However, no effective change was seen for the stress value and the plastic strain. At higher maximum temperatures, the change in the material behavior was lower. The fracture analysis by scanning electron microscopy (SEM) demonstrated that both materials had a brittle behavior due to cleavage and quasi-cleavage marks. The damage mechanism was also due to the Si-rich phase and intermetallics, respectively for the crack propagation and the micro-crack initiation

Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

Abstract. In this article, the effect of nano-clay particles and heat-treating on thermo-mechanical fatigue (TMF) behaviors and failures of piston aluminum-silicon (AlSi) alloys was investigated. For this purpose, thermo-mechanical fatigue tests were conducted under out-of-phase (OP) loading conditions. Two loading conditions were checked based on different maximum temperatures (250, 300, and 350 °C) and various thermo-mechanical loading factors (100, 125, and 150%). The minimum temperature was constant in all tests at 50 °C under a heating/cooling rate of 10 °C/s and a dwell time of 5 s. Results showed that the nano-composites had a longer fatigue lifetime, at least 2 times higher, compared to the Al alloy, when the maximum temperature was 250 °C and the thermo-mechanical loading factor was 100%. However, no effective change was seen for the stress value and the plastic strain. At higher maximum temperatures, the change in the material behavior was lower. The fracture analysis by scanning electron microscopy (SEM) demonstrated that both materials had a brittle behavior due to cleavage and quasi-cleavage marks. The damage mechanism was also due to the Si-rich phase and intermetallics, respectively for the crack propagation and the micro-crack initiation

An introduction of photobioreactor technology in mass culture of algea in order to improve the shrimp culture in Iran

Algae production in controlled condition is one one the most important subject that ought to studying . This kind of algae production can use for biosynthesis great syuffs like as vtamines and unsaturated fatty acids. For achieving this goal < this project was designed and done. At this project some procedures like steril cultivation < light controlling, remove and dissolving gases as oxygen and carbon dioxide, mixturing tank, intelligent sensor, biofilter purifying, dechloration vessel and dosing pumps are new phenomenas are used. Finally, chlorella sp from Gilan institute were culativated more than 16000000 cells per one millimeter

Supply and protected different population of Litopenaeus vannamei subadult zero foster (F0) from difference provinces Iran

Nowadays, Litopenaeus vannamei are the most important species of farmed penaeidae shrimp in the world that is rapidly replacing native species in areas aquaculture. Due to demand increase for this species culture, shrimp displacement to different areas may be associated with some potential pathogens transferred to new areas farmed. Therefore, in this study were prepared bi-osecurity conditions for specific disease-free production of L. vannamei. Thereafter, three populations (Molokaei, High health and mix of Molokaei and High health) of the shrimp various reserves were detected base on origin and genetic indexes such as: observed heterozygosity, expected heterozygosity, allele frequency, coefficient inbreeding, genetic differentiation, genetic distance and genetic identity. On the other hand, epidemiological studies indicate non pathogens (viral, bacterial, fungal and parasitic) recognition of different populations selected in the quarantine salon. The bioassay results showed that the average weight and length of the populations of High health and Mix significantly greater than was a population of Molokaei. The shrimp populations were stocked in fiberglass tank (five ton) and were kept separated in the quarantine salon. During maintenance shrimp of populations in the quarantine salon were evaluated living and non-living pathogens with PCR, microbiology and biochemical methods. There is not any pathogens detection from shrimp populations stocking in the quarantine salon, so the shrimps were carried over to pond for broodstock culture of specific pathogenic free