9 research outputs found
Sleep disorders in patients with juvenile idiopathic arthritis as assessed by the sleep disturbance scale for children
Experiment and Study on Mechanical Property of Sandstone Post-peak Under the Cyclic Loading and Unloading
Tensile fracture strength of Brisbane tuff by static and cyclic loading tests
This research presents the results of laboratory experiments during the investigation of tensile strength-strain characteristics of Brisbane tuff disc specimens under static and diametral cyclic loading. Three different cyclic loading methods were used; namely, sinusoidal cyclic loading, type I and II increasing cyclic loading with various amplitude values. The first method applied the stress amplitude-cycle number (s-n) curve approach to the measurement of the indirect tensile strength (ITS) and fracture toughness (K ) values of rocks for the first time in the literature. The type I and II methods investigated the effect of increasing cyclic loading on the ITS and K of rocks. For Brisbane tuff, the reduction in ITS was found to be 30 % under sinusoidal loading, whereas type I and II increasing cyclic loading caused a maximum reduction in ITS of 36 %. The maximum reduction of the static K of 46 % was obtained for the highest amplitude type I cyclic loading tested. For sinusoidal cyclic loading, a maximum reduction of the static K of 30 % was obtained. A continuous irreversible accumulation of damage was observed in dynamic cyclic tests conducted at different amplitudes and mean stress levels. Scanning electron microscope images showed that fatigue damage in Brisbane tuff is strongly influenced by the failure of the matrix because of both inter-granular fracturing and trans-granular fracturing. The main characteristic was grain breakage under cyclic loading, which probably starts at points of contact between grains and is accompanied by the production of very small fragments, probably due to frictional sliding within the weak matrix