Coupling leeside grainfall to avalanche characteristics in aeolian dune dynamics

Avalanche (grainflow) processes are fundamental drivers of dune morphodynamics and are typically initiated by grainfall accumulations. In sedimentary systems, however, the dynamism between grainfall and grainflow remains unspecified because simple measurements are hampered by the inherent instability of lee slopes. Here, for the first time, terrestrial laser scanning is used to quantify key aspects of the grainfall process on the lee (slip face) of a barchan sand dune. We determine grainfall zone extent and flux and show their variability under differing wind speeds. The increase in the downwind distance from the brink of peak grainfall under stronger winds provides a mechanism that explains the competence of large avalanches to descend the entire lee slope. These findings highlight important interactions between wind speed, grainfall, and subsequent grainflow that influence dune migration rates and are important for correct interpretation of dune stratigraphy

Preferential dust sources: A geomorphological classification designed for use in global dust-cycle models

We present a simple theoretical land-surface classification that can be used to determine the location and temporal behavior of preferential sources of terrestrial dust emissions. The classification also provides information about the likely nature of the sediments, their erodibility and the likelihood that they will generate emissions under given conditions. The scheme is based on the dual notions of geomorphic type and connectivity between geomorphic units. We demonstrate that the scheme can be used to map potential modern-day dust sources in the Chihuahuan Desert, the Lake Eyre Basin and the Taklamakan. Through comparison with observed dust emissions, we show that the scheme provides a reasonable prediction of areas of emission in the Chihuahuan Desert and in the Lake Eyre Basin. The classification is also applied to point source data from the Western Sahara to enable comparison of the relative importance of different land surfaces for dust emissions. We indicate how the scheme could be used to provide an improved characterization of preferential dust sources in global dust-cycle models.Griffith Sciences, Griffith Institute for Drug DiscoveryFull Tex

Methodology and recruitment for a randomised controlled trial to evaluate the safety of wahakurafor infant bedsharing

BACKGROUND: Sudden Unexpected Death in Infancy (SUDI) has persistent high rates in deprived indigenous communities and much of this mortality is attributable to unsafe sleep environments. Whilst health promotion worldwide has concentrated on avoidance of bedsharing, the indigenous Māori community in New Zealand has reproduced a traditional flax bassinet (wahakura) designed to be used in ways that include bedsharing. To date there has been no assessment of the safety of this traditional sleeping device. METHODS/DESIGN: This two arm randomised controlled trial is being conducted with 200 mother-baby dyads recruited from Māori communities in areas of high deprivation in the Hawkes Bay, New Zealand. They are randomised to wahakura or bassinet use and investigation includes questionnaires at baseline (pregnancy), when baby is 1, 3, and 6 months, and an overnight video sleep study at 1 month with monitoring of baby temperature and oxygen saturation, and measurement of baby urinary cotinine and maternal salivary oxytocin. Outcome measures are amount of time head covered, amount of time in thermal comfort zone, number of hypoxic events, amount of time in the assigned sleep device, amount of time breastfeeding, number of parental (non-feed related) touching infant events, amount of time in the prone sleep position, the number of behavioural arousals and the amount of time infant is awake overnight. Survey data will compare breastfeeding patterns at 1, 3, and 6 months as well as data on maternal mind-mindedness, maternal wellbeing, attachment to baby, and maternal sleep patterns. DISCUSSION: Indigenous communities require creative SUDI interventions that fit within their prevailing world view. This trial, and its assessment of the safety of a wahakura relative to a standard bassinet, is an important contribution to the range of SUDI prevention research being undertaken worldwide. TRIALS REGISTRATION: Australian New Zealand Clinical Trials Registry: ACTRN12610000993099 Registered 16(th) November 201

Groundwater prospectivity in the Midlands area

As part of the Water For Food Midlands project, Department of Primary Industry and Regional Development (DPIRD) is undertaking mapping of high-quality agricultural land (HQAL) to identify areas of agricultural value. This mapping utilises data relating to soils, land capability and rainfall, that is being integrated into a GIS-format that is easy to comprehend and can be incorporated into planning processes. This report details the development and results of a GIS-based product that represents groundwater resource prospectivity for irrigated agriculture in the Midlands project area. The output maps will be useful for landowners and developers highlighting the opportunities and risks for accessing groundwater resources. It is envisaged that the final groundwater prospectivity and HQAL datasets will be combined to identify areas with suitable water and land conditions for irrigated agriculture. There has been no previous attempt to develop a groundwater prospectivity layer for groundwater resources in Western Australia. As such, this methodology has been progressively developed with ongoing discussion and review between Hydrogeoscience, Hydroconcept and Department of Water and Environmental Regulation (DWER). The primary reference for this work is the northern Perth Basin Groundwater Bulletin entitled Northern Perth Basin: Geology, Hydrogeology and Groundwater Resources (Department of Water 2017) and associated digital data

Large eddy simulation of interacting barchan dunes in a steady, unidirectional flow

We have performed large-eddy simulations of turbulent flow 4 over barchan dunes in a channel with different interdune spacings in the downstream direction at Reynolds number, Re∞ ≃ 26000 (based on the free 6 stream velocity and channel height). Simulations are validated against ex-perimental data (at Re∞ = 55460); the largest interdune spacing (2.38λ, where λ is the length of the barchan model) presents similar characteristics to the isolated dune in the experiment, indicating that at this distance the sheltering effect of the upstream dune is rather weak. We examine 3D realizations of the mean and instantaneous flow to explain features of the flow field relevant to sediment transport. Barchan dunes induce two counter-rotating streamwise vortices, along each of the horns, which direct high-momentum fluid toward the symmetry plane and low-momentum fluid near the bed away from the centerline. The flow near the bed, upstream of the dune, diverges from the centerline plane, decelerates and then rises on the stoss side of the dune while accelerating; the flow close to the centerline plane separates at the crest and reattaches on the bed. Away from the centerline plane and along the horns, flow separation occurs intermittently. The flow in the separation bubble is routed towards the horns and leaves the dune at their tips. The separated flow at the crest reattaches on the bed, except on the centerline symmetry plane of the dune, where a weak saddle point of separation ap- pears at the bed. The distribution of the bed shear-stress, characteristics of the separation and reattachment regions, and instantaneous wall turbulence are discussed. Characteristics of the internal boundary layer developing on the bed after the reattachment region are studied. The interdune spacing isfound to affect significantly the turbulent flow over the stoss side of the downstream dunes; at smaller interdune-spacings, coherent high- and low- speed streaks are shorter but stronger, and the spanwise normal Reynolds stress is larger. The turbulent kinetic energy budgets show the importance of the pressure transport and mean-flow advection in transporting energy from the overlying wake layer to the internal boundary layer over the stoss side of the closely-spaced dunes. The characteristics of the separated-shear layer are altered slightly at smaller interdune spacing; the separation bubble is smaller, the separated-shear layer is stronger, and the bed shear-stress is larger. Away from the dunes, typical wall-turbulence structures are observed, but coher- ent eddies generated in the separated-shear layer due to the Kelvin-Helmholtz instability are dominant near the dune. Coherent structures are generated more frequently at smaller interdune spacing; they move farther away from the bed, towards the free surface, and remain in between the horns. At larger interdune spacings, these coherent structures are advected in the spanwise direction with the mean streamwise vortices and can be observed outside of the dunes

Field evidence for the upwind velocity shift at the crest of low dunes

Wind topographically forced by hills and sand dunes accelerates on the upwind (stoss) slopes and reduces on the downwind (lee) slopes. This secondary wind regime, however, possesses a subtle effect, reported here for the first time from field measurements of near-surface wind velocity over a low dune: the wind velocity close to the surface reaches its maximum upwind of the crest. Our field-measured data show that this upwind phase shift of velocity with respect to topography is found to be in quantitative agreement with the prediction of hydrodynamical linear analysis for turbulent flows with first order closures. This effect, together with sand transport spatial relaxation, is at the origin of the mechanisms of dune initiation, instability and growth.Comment: 13 pages, 6 figures. Version accepted for publication in Boundary-Layer Meteorolog

The dune effect on sand-transporting winds on Mars

Wind on Mars is a significant agent of contemporary surface change, yet the absence of in situ meteorological data hampers the understanding of surface–atmospheric interactions. Airflow models at length scales relevant to landform size now enable examination of conditions that might activate even small-scale bedforms (ripples) under certain contemporary wind regimes. Ripples have the potential to be used as modern ‘wind vanes’ on Mars. Here we use 3D airflow modelling to demonstrate that local dune topography exerts a strong influence on wind speed and direction and that ripple movement likely reflects steered wind direction for certain dune ridge shapes. The poor correlation of dune orientation with effective sand-transporting winds suggests that large dunes may not be mobile under modelled wind scenarios. This work highlights the need to first model winds at high resolution before inferring regional wind patterns from ripple movement or dune orientations on the surface of Mars today

Dust source identification using MODIS: a comparison of techniques applied to the Lake Eyre Basin, Australia

The impact of mineral aerosol (dust) in the Earth's system depends on particle characteristics which are initially determined by the terrestrial sources from which the sediments are entrained. Remote sensing is an established method for the detection and mapping of dust events, and has recently been used to identify dust source locations with varying degrees of success. This paper compares and evaluates five principal methods, using MODIS Level 1B and MODIS Level 2 aerosol data, to: (a) differentiate dust (mineral aerosol) from non-dust, and (2) determine the extent to which they enable the source of the dust to be discerned. The five MODIS L1B methods used here are: (1) un-processed false colour composite (FCC), (2) brightness temperature difference, (3) Ackerman's (1997: J.Geophys. Res., 102, 17069–17080) procedure, (4) Miller's (2003:Geophys. Res. Lett. 30, 20, art.no.2071) dust enhancement algorithm and (5) Roskovensky and Liou's (2005: Geophys. Res. Lett. 32, L12809) dust differentiation algorithm; the aerosol product is MODIS Deep Blue (Hsu et al., 2004: IEEE Trans. Geosci. Rem. Sensing, 42, 557–569), which is optimised for use over bright surfaces (i.e. deserts). These are applied to four significant dust events from the Lake Eyre Basin, Australia. OMI AI was also examined for each event to provide an independent assessment of dust presence and plume location. All of the techniques were successful in detecting dust when compared to FCCs, but the most effective technique for source determination varied from event to event depending on factors such as cloud cover, dust plume mineralogy and surface reflectance. Significantly, to optimise dust detection using the MODIS L1B approaches, the recommended dust/non-dust thresholds had to be considerably adjusted on an event by event basis. MODIS L2 aerosol data retrievals were also found to vary in quality significantly between events; being affected in particular by cloud masking difficulties. In general, we find that OMI AI and MODIS AQUA L1B and L2 data are complementary; the former are ideal for initial dust detection, the latter can be used to both identify plumes and sources at high spatial resolution. Overall, approaches using brightness temperature difference (BT10–11) are the most consistently reliable technique for dust source identification in the Lake Eyre Basin. One reason for this is that this enclosed basin contains multiple dust sources with contrasting geochemical signatures. In this instance, BTD data are not affected significantly by perturbations in dust mineralogy. However, the other algorithms tested (including MODIS Deep Blue) were all influenced by ground surface reflectance or dust mineralogy; making it impossible to use one single MODIS L1B or L2 data type for all events (or even for a single multiple-plume event). There is, however, considerable potential to exploit this anomaly, and to use dust detection algorithms to obtain information about dust mineralogy

Early-stage aeolian protodunes: bedform development and sand transport dynamics

Early-stage aeolian bedforms, or protodunes, are elemental in the continuum of dune development and act as essential precursors to mature dunes. Despite this, we know very little about the processes and feedback mechanisms that shape these nascent bedforms. Whilst theory and conceptual models have offered some explanation for protodune existence and development, until now, we have lacked the technical capability to measure such small bedforms in aeolian settings. Here, we employ terrestrial laser scanning to measure morphological change at the high frequency and spatial resolution required to gain new insights into protodune behaviour. On a 0.06 m high protodune, we observe vertical growth of the crest by 0.005 m in two hours. Our direct measurements of sand transport on the protodune account for such growth, with a reduction in time-averaged sediment flux of 18% observed over the crestal region. Detailed measurements of form also establish key points of morphological change on the protodune. The position on the stoss slope where erosion switches to deposition is found at a point 0.07 m upwind of the crest. This finding supports recent models that explain vertical dune growth through an upwind shift of this switching point. Observations also show characteristic changes in the asymmetric cross section of the protodune. Flow-form feedbacks result in a steepening of the lee slope and a decline in lower stoss slope steepness (by 3°), constituting a reshaping of protodune form towards more mature dune morphology. The approaches and findings applied here, a) demonstrate an ability to quantify processes at requisite spatial and temporal scales for monitoring early-stage dune evolution, b) highlight the crucial role of form-flow feedbacks in enabling early-stage bedform growth, alluding to a fluctuation in feedbacks that require better representation in dune models, and c) provide a new stimulus for advancing understanding of aeolian bedforms