Electron-Deficient N-Alkyloyl Derivatives of Thienopyrrole-4,6-dione Yield Efficient Polymer Solar Cells with Open-Circuit Voltages > 1 V

Poly(benzo[1,2-b:4,5-b′]dithiophene–thieno[3,4-c]pyrrole-4,6-dione) (PBDTTPD) polymer donors yield some of the highest open-circuit voltages (VOC, ca. 0.9 V) and fill factors (FF, ca. 70%) in conventional bulk-heterojunction (BHJ) solar cells with PCBM acceptors. Recent work has shown that the incorporation of ring substituents into the side chains of the BDT motifs in PBDTTPD can induce subtle variations in material properties, resulting in an increase of the BHJ device VOC to ∼1 V. In this contribution, we report on the synthesis of N-alkyloyl-substituted TPD motifs (TPD(CO)) and show that the electron-deficient motifs can further lower both the polymer LUMO and HOMO levels, yielding device VOC > 1 V (up to ca. 1.1 V) in BHJ solar cells with PCBM. Despite the high VOC achieved (i.e., low polymer HOMO), BHJ devices cast from TPD(CO)-based polymer donors can reach power conversion efficiencies (PCEs) of up to 6.7%, making these promising systems for use in the high-band-gap cell of tandem solar cells

Transrectal ultrasound appearance of granulomatous prostatitis.

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/135293/1/jum1990912677.pd

Sequential use of ammonium and leucine as nitrogen sources during growth of Geotrichum candidum on a glucose based medium

Geotrichum candidum growth on ammonium and leucine as nitrogen sources and glucose as a carbon source was examined. A clear preference of G. candidum for ammonium over leucine as a nitrogen source was shown. Indeed, ammonium was completely exhausted at the end of exponential growth after less than 35 hrs of culture; in contrast only 5% of leucine was concomitantly assimilated. Growth continued at slower rates on glucose and leucine as carbon and nitrogen sources respectively, and at the end of culture (185 hrs), leucine was completely exhausted

Impact Ionization in ZnS

The impact ionization rate and its orientation dependence in k space is calculated for ZnS. The numerical results indicate a strong correlation to the band structure. The use of a q-dependent screening function for the Coulomb interaction between conduction and valence electrons is found to be essential. A simple fit formula is presented for easy calculation of the energy dependent transition rate.Comment: 9 pages LaTeX file, 3 EPS-figures (use psfig.sty), accepted for publication in PRB as brief Report (LaTeX source replaces raw-postscript file

Imaging of joints with laser‐based photoacoustic tomography: An animal study

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/134964/1/mp4166.pd

The effect of lattice temperature on surface damage in fused silica optics

We examine the effect of lattice temperature on the probability of surface damage initiation for 355nm, 7ns laser pulses for surface temperatures below the melting point to temperatures well above the melting point of fused silica. At sufficiently high surface temperatures, damage thresholds are dramatically reduced. Our results indicate a temperature activated absorption and support the idea of a lattice temperature threshold of surface damage. From these measurements, we estimate the temperature dependent absorption coefficient for intrinsic silica

A novel, aerosol-nanocrystal floating-gate device for non-volatile memory applications

This paper describes the fabrication, and structural and electrical characterization of a new, aerosol-nanocrystal floating-gate FET, aimed at non-volatile memory (NVM) applications. This aerosol-nanocrystal NVM device features program/erase characteristics comparable to conventional stacked gate NVM devices, excellent endurance (>l0^5 P/E cycles), and long-term non-volatility in spite of a thin bottom oxide (55-60Å). In addition, a very simple fabrication process makes this aerosol-nanocrystal NVM device a potential candidate for low cost NVM applications

Thermal annealing of laser damage precursors on fused silica surfaces

Previous studies have identified two significant precursors of laser damage on fused silica surfaces at fluenes below {approx} 35 J/cm{sup 2}, photoactive impurities in the polishing layer and surface fractures. In the present work, isothermal heating is studied as a means of remediating the highly absorptive, defect structure associated with surface fractures. A series of Vickers indentations were applied to silica surfaces at loads between 0.5N and 10N creating fracture networks between {approx} 10{micro}m and {approx} 50{micro}m in diameter. The indentations were characterized prior to and following thermal annealing under various times and temperature conditions using confocal time-resolved photo-luminescence (CTP) imaging, and R/1 optical damage testing with 3ns, 355nm laser pulses. Significant improvements in the damage thresholds, together with corresponding reductions in CTP intensity, were observed at temperatures well below the glass transition temperature (T{sub g}). For example, the damage threshold on 05.N indentations which typically initiates at fluences <8 J/cm{sup 2} could be improved >35 J/cm{sup 2} through the use of a {approx} 750 C thermal treatment. Larger fracture networks required longer or higher temperature treatment to achieve similar results. At an annealing temperature > 1100 C, optical microscopy indicates morphological changes in some of the fracture structure of indentations, although remnants of the original fracture and significant deformation was still observed after thermal annealing. This study demonstrates the potential of using isothermal annealing as a means of improving the laser damage resistance of fused silica optical components. Similarly, it provides a means of further understanding the physics associated with optical damage and related mitigation processes

Der diskrete Charme der Bourgeoisie - Ein Beitrag zur Soziologie des modernen Wirtschaftsbürgertums

Entgegen der These der Auflösungserscheinungen des Bürgertums stellt der Autor die Annahme auf den Prüfstand, dass wir es nach wie vor mit gesellschaftlichen Fraktionierungen bürgerlicher Lebensweisen zu tun haben. Am Beispiel autobiographischer Schriften von deutschen Topmanagern stellt der Text ein modernes Verständnis des Wirtschaftsbürgertums vor, das organisational (durch die Karrieremechanismen der Organisation) und institutionell (im Feld der Wirtschaft) verankert ist. Die moderne Sozialformation des Wirtschaftsbürgertums ist nur noch auf der Grundlage von Organisationen denkbar. Sie lässt sich, jenseits von Klasse und Stand, als Positionselite beschreiben. Anhand der Autobiographien lässt sich die Reproduktion dieser Elite auf Basis einer engen Verknüpfung zwischen familialer Herkunft, an organisationale Karrieren gebundene Leistungsbereitschaft und hoher formaler Bildung nachzeichnen. Die Abgrenzung in der Statusreproduktion zwischen Bildungs- und Wirtschaftsbürgertum weist der Autor am jeweiligen Verhältnis zur Bildung nach; zwar können beide einen hohen Bildungsgrad in Form von Bildungspatenten nachweisen, doch im Falle des Wirtschaftsbürgertums herrscht ein instrumentelles Verhältnis zur Bildung vor. Der hohe Bildungsgrad folgt hier dem Bedürfnis, den Status mittels formaler Bildung abzusichern und damit die Gefahr der eigenen Austauschbarkeit - als Personal der Organisation - zu kompensieren. Der Text macht außerdem generationale Effekte sichtbar; insbesondere indem er darlegt, inwieweit der "moderne Manager" einerseits in der Betonung seines Status seinen Vorgängern gleicht und sich doch gleichzeitig in der Art der Unternehmensführung abgrenzt - indem er bspw. die Managementkonzepte seiner Zeit aufgreift

Effects of aversive odour presentation on inhibitory control in the Stroop colour-word interference task

<p>Abstract</p> <p>Background</p> <p>Due to the unique neural projections of the olfactory system, odours have the ability to directly influence affective processes. Furthermore, it has been shown that emotional states can influence various non-emotional cognitive tasks, such as memory and planning. However, the link between emotional and cognitive processes is still not fully understood. The present study used the olfactory pathway to induce a negative emotional state in humans to investigate its effect on inhibitory control performance in a standard, single-trial manual Stroop colour-word interference task. An unpleasant (H₂S) and an emotionally neutral (Eugenol) odorant were presented in two separate experimental runs, both in blocks alternating with ambient air, to 25 healthy volunteers, while they performed the cognitive task.</p> <p>Results</p> <p>Presentation of the unpleasant odorant reduced Stroop interference by reducing the reaction times for incongruent stimuli, while the presentation of the neutral odorant had no effect on task performance.</p> <p>Conclusions</p> <p>The odour-induced negative emotional state appears to facilitate cognitive processing in the task used in the present study, possibly by increasing the amount of cognitive control that is being exerted. This stands in contrast to other findings that showed impaired cognitive performance under odour-induced negative emotional states, but is consistent with models of mood-congruent processing.</p