Photoelectrochemical Hydrogen Evolution Using Si Microwire Arrays

Arrays of B-doped p-Si microwires, diffusion-doped with P to form a radial n+ emitter and subsequently coated with a 1.5-nm-thick discontinuous film of evaporated Pt, were used as photocathodes for H_2 evolution from water. These electrodes yielded thermodynamically based energy-conversion efficiencies >5% under 1 sun solar simulation, despite absorbing less than 50% of the above-band-gap incident photons. Analogous p-Si wire-array electrodes yielded efficiencies <0.2%, largely limited by the low photovoltage generated at the p-Si/H_2O junction

Thermally Stable N_2-Intercalated WO_3 Photoanodes for Water Oxidation

We describe stable intercalation compounds of the composition xN_2•WO_3 (x = 0.034–0.039), formed by trapping N_2 in WO_3. The incorporation of N_2 significantly reduced the absorption threshold of WO_3; notably, 0.039N_2•WO_3 anodes exhibited photocurrent under illumination at wavelengths ≤640 nm with a faradaic efficiency for O_2 evolution in 1.0 M HClO_4(aq) of nearly unity. Spectroscopic and computational results indicated that deformation of the WO3 host lattice, as well as weak electronic interactions between trapped N_2 and the WO_3 matrix, contributed to the observed red shift in optical absorption. Noble-gas-intercalated WO_3 materials similar to xN_2•WO_3 are predicted to function as photoanodes that are responsive to visible light

Electrical Junction Behavior of Poly(3,4-ethylenedioxythiophene) (PEDOT) Contacts to H‑Terminated and CH_3‑Terminated p‑, n‑, and n^+‑Si(111) Surfaces

The electronic and photovoltaic properties of junctions between the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and Si(111) surfaces have been investigated for a range of doping types, doping levels, and surface functionalization of the Si. PEDOT–poly(styrenesulfonate) (PSS) formed ohmic, low resistance contacts to H-terminated and CH_3-terminated p-type Si(111) surfaces. In contrast, PEDOT formed high barrier height (0.8–1.0 V) contacts to n-Si(111) surfaces, with CH_3-terminated n-Si(111)/PEDOT contacts showing slightly higher barrier heights (1.01 eV) than H-terminated n-Si(111)/PEDOT contacts (0.89 V). PEDOT contacts to CH_3-terminated and H-terminated n-Si(111) surfaces both produced photovoltages under illumination in accord with the Shockley diode limit based on bulk/recombination diffusion in the semiconductor. Such devices produced solar energy-conversion efficiencies of 5.7% under 100 mW cm^(–2) of simulated air mass 1.5 illumination. The electrical properties of PEDOT contacts to CH_3-terminated Si surfaces were significantly more stable in an air ambient than the electrical properties of PEDOT contacts to H-terminated Si surfaces. PEDOT films produced a low resistance, tunnel-barrier type of ohmic contact to n^+-Si(111) surfaces. Hence, through various combinations of doping type, doping level, and surface functionalization, the PEDOT/Si contact system offers a wide range of opportunities for integration into monolithic photovoltaic and/or artificial photosynthetic systems

In situ probe of photocarrier dynamics in water-splitting hematite (α-Fe_(2)O_3) electrodes

The spectra and dynamics of photogenerated electrons and holes in excited hematite (α-Fe_(2)O_3) electrodes are investigated by transient absorption (from visible to infrared and from femto- to micro-seconds), bias-dependent differential absorption and Stark spectroscopy. Comparison of results from these techniques enables the assignment of the spectral signatures of photogenerated electrons and holes. Under the pulse illumination conditions of transient absorption (TA) measurement, the absorbed photon to electron conversion efficiency (APCE) of the films at 1.43 V (vs. reversible hydrogen electrode, RHE) is 0.69%, significantly lower than that at AM 1.5. TA kinetics shows that under these conditions, >98% of the photogenerated electrons and holes have recombined by 6 μs. Although APCE increases with more positive bias (from 0.90 to 1.43 V vs. RHE), the kinetics of holes up to 6 μs show negligible change, suggesting that the catalytic activity of the films is determined by holes with longer lifetimes

Accidental hepatic artery ligation in humans

Despite the vast amount of information from experimental animals, it has been difficult to obtain a clear-cut picture of the effects of ligation of the hepatic artery in humans with relatively normal livers. The last complete review of this subject in 1933 indicated that a mortality in excess of 50 per cent could be expected in non-cirrhotic patients with injury of the hepatic artery or its principal branches. Five cases of dearterialization of the normal human liver have been observed. These were due to accidental interruption of the right hepatic artery in four and the proper hepatic artery in one. The injured vessel was repaired in one case and ligated in the others. In four of the five patients the vascular disruption was the sole injury. In the other the common bile duct was also lacerated. There was no evidence of hepatic necrosis in any case although one patient died from complications of common duct repair. Transient changes in SGOT and temporary low grade bilirubinemia were commonly noted. In addition, all cases of ligation of the hepatic artery reported since 1933 have been compiled. On the basis of reviewed, as well as the presently reported cases, it is concluded that ligation of the hepatic artery or one of its branches in the patient with relatively normal hepatic function is not ordinarily fatal in the otherwise uncomplicated case. Adequate perfusion of the liver can usually be provided by the remaining portal venous flow and whatever arterial collaterals are present, unless additional factors further reduce the portal venous flow or increase hepatic oxygen need. These factors include fever, shock and anoxia. The key to therapy in unreconstructed injuries to the hepatic artery is avoidance of these secondary influences. © 1964

Stable solar-driven oxidation of water by semiconducting photoanodes protected by transparent catalytic nickel oxide films

Reactively sputtered nickel oxide (NiO_x) films provide transparent, antireflective, electrically conductive, chemically stable coatings that also are highly active electrocatalysts for the oxidation of water to O_2(g). These NiO_x coatings provide protective layers on a variety of technologically important semiconducting photoanodes, including textured crystalline Si passivated by amorphous silicon, crystalline n-type cadmium telluride, and hydrogenated amorphous silicon. Under anodic operation in 1.0 M aqueous potassium hydroxide (pH 14) in the presence of simulated sunlight, the NiO_x films stabilized all of these self-passivating, high-efficiency semiconducting photoelectrodes for >100 h of sustained, quantitative solar-driven oxidation of water to O_2(g)

Diquat Derivatives: Highly Active, Two-Dimensional Nonlinear Optical Chromophores with Potential Redox Switchability

In this article, we present a detailed study of structure−activity relationships in diquaternized 2,2′-bipyridyl (diquat) derivatives. Sixteen new chromophores have been synthesized, with variations in the amino electron donor substituents, π-conjugated bridge, and alkyl diquaternizing unit. Our aim is to combine very large, two-dimensional (2D) quadratic nonlinear optical (NLO) responses with reversible redox chemistry. The chromophores have been characterized as their PF_6^− salts by using various techniques including electronic absorption spectroscopy and cyclic voltammetry. Their visible absorption spectra are dominated by intense π → π^* intramolecular charge-transfer (ICT) bands, and all show two reversible diquat-based reductions. First hyperpolarizabilities β have been measured by using hyper-Rayleigh scattering with an 800 nm laser, and Stark spectroscopy of the ICT bands affords estimated static first hyperpolarizabilities β_0. The directly and indirectly derived β values are large and increase with the extent of π-conjugation and electron donor strength. Extending the quaternizing alkyl linkage always increases the ICT energy and decreases the E_(1/2) values for diquat reduction, but a compensating increase in the ICT intensity prevents significant decreases in Stark-based β_0 responses. Nine single-crystal X-ray structures have also been obtained. Time-dependent density functional theory clarifies the molecular electronic/optical properties, and finite field calculations agree with polarized HRS data in that the NLO responses of the disubstituted species are dominated by ‘off-diagonal’ β_(zyy) components. The most significant findings of these studies are: (i) β_0 values as much as 6 times that of the chromophore in the technologically important material (E)-4′-(dimethylamino)-N-methyl-4-stilbazolium tosylate; (ii) reversible electrochemistry that offers potential for redox-switching of optical properties over multiple states; (iii) strongly 2D NLO responses that may be exploited for novel practical applications; (iv) a new polar material, suitable for bulk NLO behavior

Crystalline nickel manganese antimonate as a stable water-oxidation catalyst in aqueous 1.0 M H_2SO_4

Water oxidation is a required half-reaction for electrochemical water splitting. To date, the only well-established active oxygen-evolution catalysts stable under operating conditions and at rest in acidic aqueous media contain Ru or Ir, two of the scarcest non-radioactive elements on Earth. We report herein a nickel-manganese antimonate electrocatalyst with a rutile-type crystal structure that requires an initial voltammetric overpotential of 672 ± 9 mV to catalyze the oxidation of water to O_2(g) at a rate corresponding to 10 mA cm^(−2) of current density when operated in contact with 1.0 M sulfuric acid. Under galvanostatic control, the overpotential initially rose from 670 mV but was then stable at 735 ± 10 mV for 168 h of continuous operation at 10 mA cm^(−2). We additionally provide an in-depth evaluation of the stability of the nickel-manganese antimonate electrocatalyst, including elemental characterization of the surface, bulk, and electrolyte before and after electrochemical operation

Strategies for cell membrane functionalization

The ability to rationally manipulate and augment the cytoplasmic membrane can be used to overcome many of the challenges faced by conventional cellular therapies and provide innovative opportunities when combined with new biotechnologies. The focus of this review is on emerging strategies used in cell functionalization, highlighting both pioneering approaches and recent developments. These will be discussed within the context of future directions in this rapidly evolving field

Evolution of Linear Absorption and Nonlinear Optical Properties in V-Shaped Ruthenium(II)-Based Chromophores

In this article, we describe a series of complexes with electron-rich cis-{Ru^(II)(NH_3)_4}^(2+) centers coordinated to two pyridyl ligands bearing N-methyl/arylpyridinium electron-acceptor groups. These V-shaped dipolar species are new, extended members of a class of chromophores first reported by us (Coe, B. J. et al. J. Am. Chem. Soc. 2005, 127, 4845−4859). They have been isolated as their PF_6− salts and characterized by using various techniques including ^1H NMR and electronic absorption spectroscopies and cyclic voltammetry. Reversible Ru^(III/II) waves show that the new complexes are potentially redox-switchable chromophores. Single crystal X-ray structures have been obtained for four complex salts; three of these crystallize noncentrosymmetrically, but with the individual molecular dipoles aligned largely antiparallel. Very large molecular first hyperpolarizabilities β have been determined by using hyper-Rayleigh scattering (HRS) with an 800 nm laser and also via Stark (electroabsorption) spectroscopic studies on the intense, visible d → π^* metal-to-ligand charge-transfer (MLCT) and π → π^* intraligand charge-transfer (ILCT) bands. The latter measurements afford total nonresonant β_0 responses as high as ca. 600 × 10^(−30) esu. These pseudo-C_(2v) chromophores show two substantial components of the β tensor, β_(zzz) and β_(zyy), although the relative significance of these varies with the physical method applied. According to HRS, β_(zzz) dominates in all cases, whereas the Stark analyses indicate that β_(zyy) is dominant in the shorter chromophores, but β_(zzz) and β_(zyy) are similar for the extended species. In contrast, finite field calculations predict that β_(zyy) is always the major component. Time-dependent density functional theory calculations predict increasing ILCT character for the nominally MLCT transitions and accompanying blue-shifts of the visible absorptions, as the ligand π-systems are extended. Such unusual behavior has also been observed with related 1D complexes (Coe, B. J. et al. J. Am. Chem. Soc. 2004, 126, 3880−3891)