Strength assessment of stiffened blast walls in offshore installations under explosions

Offshore installations are exposed to hydrocarbon explosions and/or fire accidents. Especially, explosions lead to serious damages to human, safety, and environment. To minimise and prevent the damage from explosions, blast walls are generally installed in oil and gas production structures. Typical blast walls are classified into flat, corrugated, and stiffened types. Among them, corrugated blast walls are frequently used for reasons such as construction, cost, and energy absorption. However, it has been known that a corrugated type of blast wall buckles between the web and flange under the explosion loads, and loses its stiffness. It means that the buckling phenomenon of a blast wall is closely related to the structural strength. This study investigates on the structural characteristics of a blast wall under quasi-static and dynamic (explosion) loads with or without a flat-plated stiffener. Finally, it can be concluded that the flat type of stiffeners are located at the buckling region to delay the buckling and improve the strength of blast walls

Methods for determining the optimal arrangement of water deluge systems on offshore installations

Offshore installations are prone to fire and/or explosion accidents. Fires have particularly serious consequences due to their high temperatures and heat flux, which affect humans, structures and environments alike. Due to the hydrocarbon explosions caused by delayed ignition following gas dispersion, fires can be the result of immediate ignition after gas release. Accordingly, it can be difficult to decrease their frequency, which is an element of risk (risk=frequency×consequence), using an active protection system (APS) such as gas detectors capable of shutting down the operation. Thus, it is more efficient to reduce the consequence using a passive protection system (PSS) such as water spray. It is important to decide the number and location of water deluge systems, thus the aim of this study is to introduce a new procedure for optimising the locations of water deluge systems using the water deluge location index (WLI) proposed herein. The locations of water deluge systems are thus optimised based on the results of credible fire scenarios using a three-dimensional computational fluid dynamics (CFD) tool. The effects of water spray and the effectiveness of the WLI are investigated in comparison with uniformly distributed sprays

Interaction imaging with amplitude-dependence force spectroscopy

Knowledge of surface forces is the key to understanding a large number of processes in fields ranging from physics to material science and biology. The most common method to study surfaces is dynamic atomic force microscopy (AFM). Dynamic AFM has been enormously successful in imaging surface topography, even to atomic resolution, but the force between the AFM tip and the surface remains unknown during imaging. Here, we present a new approach that combines high accuracy force measurements and high resolution scanning. The method, called amplitude-dependence force spectroscopy (ADFS) is based on the amplitude-dependence of the cantilever's response near resonance and allows for separate determination of both conservative and dissipative tip-surface interactions. We use ADFS to quantitatively study and map the nano-mechanical interaction between the AFM tip and heterogeneous polymer surfaces. ADFS is compatible with commercial atomic force microscopes and we anticipate its wide-spread use in taking AFM toward quantitative microscopy

An RxLR effector from phytophthora infestans prevents re-localisation of two plant NAC transcription factors from the endoplasmic reticulum to the nucleus

The plant immune system is activated following the perception of exposed, essential and invariant microbial molecules that are recognised as non-self. A major component of plant immunity is the transcriptional induction of genes involved in a wide array of defence responses. In turn, adapted pathogens deliver effector proteins that act either inside or outside plant cells to manipulate host processes, often through their direct action on plant protein targets. To date, few effectors have been shown to directly manipulate transcriptional regulators of plant defence. Moreover, little is known generally about the modes of action of effectors from filamentous (fungal and oomycete) plant pathogens. We describe an effector, called Pi03192, from the late blight pathogen Phytophthora infestans, which interacts with a pair of host transcription factors at the endoplasmic reticulum (ER) inside plant cells. We show that these transcription factors are released from the ER to enter the nucleus, following pathogen perception, and are important in restricting disease. Pi03192 prevents the plant transcription factors from accumulating in the host nucleus, revealing a novel means of enhancing host susceptibility

Assessing the risk of ship hull collapse due to collision

This study proposes a method for assessing the risk of ship hull collapse following a collision. A probabilistic approach is applied to establish the relationship between the exceedance probability of collision and the residual ultimate longitudinal strength index. A set of credible collision scenarios which represent the entire range of possible collision accidents is selected using a sampling technique based on probability density distributions of influencing parameters. The amount and location of collision damage for selected individual collision scenarios are characterised using the LS-DYNA nonlinear finite element method. The ultimate hull girder strength of a ship with predefined collision damage is then calculated using the ALPS/HULL intelligent supersize finite element method. To demonstrate the applicability of the proposed method, applied examples are given, involving collisions with a hypothetical Suezmax-class double-hull oil tanker. Based on the results, design formulations for predicting the residual strength index of damaged ship hulls are derived in an empirical manner. The examples show that the proposed method will be very useful for evaluating the risk of collapse of a ship's hull after sustaining collision damage, which may contribute to a collision risk-based design framework. Moreover, the method will be useful in rescue and salvage operations immediately after a collision by permitting a rapid assessment of the structural safety of a damaged ship

Nonlinear structural response in jet fire in association with the interaction between fire loads and time-variant geometry and material properties

For safety design of structures against fire loads, time-variant geometry and material properties depending on the temperature should be considered with fluid-structure interaction (FSI) analysis. One-way FSI analysis is generally applied due to a time consuming task. But, it has big difference of structural response between conducting oneway and two-way FSI analysis. And two-way analysis is also affected by time increment of analysis for updating the geometry, and fire loads. The aim of this study is to investigate the effect of time increments on two-way FSI analysis of structures subjected to jet fire, and to suggest a proper time increment for two-way FSI analysis. In the present study, geometries and material properties are updated at every time increments, and kinds of two-way FSI analysis are performed with different time increments by using computational fluid dynamics (CFD) and nonlinear finite element analysis (NLFEA) and an interface program between CFD and NLFEA

Past Achievements and Future Challenges in 3D Photonic Metamaterials

Photonic metamaterials are man-made structures composed of tailored micro- or nanostructured metallo-dielectric sub-wavelength building blocks that are densely packed into an effective material. This deceptively simple, yet powerful, truly revolutionary concept allows for achieving novel, unusual, and sometimes even unheard-of optical properties, such as magnetism at optical frequencies, negative refractive indices, large positive refractive indices, zero reflection via impedance matching, perfect absorption, giant circular dichroism, or enhanced nonlinear optical properties. Possible applications of metamaterials comprise ultrahigh-resolution imaging systems, compact polarization optics, and cloaking devices. This review describes the experimental progress recently made fabricating three-dimensional metamaterial structures and discusses some remaining future challenges

Facile solution-phase synthesis of γ-Mn3O4 hierarchical structures

<p>Abstract</p> <p>Background</p> <p>A lot of effort has been focused on the integration of nanorods/nanowire as building blocks into three-dimensional (3D) complex superstructures. But, the development of simple and effective methods for creating novel assemblies of self-supported patterns of hierarchical architectures to designed materials using a suitable chemical method is important to technology and remains an attractive, but elusive goal.</p> <p>Results</p> <p>The hierarchical structure of Mn₃O₄with radiated spherulitic nanorods was prepared via a simple solution-based coordinated route in the presence of macrocycle polyamine, hexamethyl-1,4,8,11-tetraazacyclotetradeca-4,11-diene (CT) with the assistance of thiourea as an additive.</p> <p>Conclusion</p> <p>This approach opens a new and facile route for the morphogenesis of Mn₃O₄material and it might be extended as a novel synthetic method for the synthesis of other inorganic semiconducting nanomaterials such as metal chalcogenide semiconductors with novel morphology and complex form, since it has been shown that thiourea can be used as an effective additive and the number of such water-soluble macrocyclic polyamines also makes it possible to provide various kinds of ligands for different metals in homogeneous water system.</p

Magnetism and its microscopic origin in iron-based high-temperature superconductors

High-temperature superconductivity in the iron-based materials emerges from, or sometimes coexists with, their metallic or insulating parent compound states. This is surprising since these undoped states display dramatically different antiferromagnetic (AF) spin arrangements and N$\rm \acute{e}$el temperatures. Although there is general consensus that magnetic interactions are important for superconductivity, much is still unknown concerning the microscopic origin of the magnetic states. In this review, progress in this area is summarized, focusing on recent experimental and theoretical results and discussing their microscopic implications. It is concluded that the parent compounds are in a state that is more complex than implied by a simple Fermi surface nesting scenario, and a dual description including both itinerant and localized degrees of freedom is needed to properly describe these fascinating materials.Comment: 14 pages, 4 figures, Review article, accepted for publication in Nature Physic