Evaluation of computer-based computer tomography stratification against outcome models in connective tissue disease-related interstitial lung disease: a patient outcome study

Table S1. Lobar visual scores were adjusted using scintigraphic and gas dilution measures of the physiological contribution of each lobe to the total lung volume in health (top row). The figure was divided by the proportion of each lung representing a lobe (16.7%), or in the case of the left upper lobe, which included the lingula, two lobes (33.3%). Table S2. Single determination standard deviation values of visual CT scores for connective tissue disease-related interstitial lung disease cases. Table S3. Patient age, gender, smoking status and measures of pulmonary function indices, CALIPER and visually scored CT parameters and echocardiography data for the four groups of the ILD-GAP index. Data represent mean values with standard deviations. CTD, connective tissue disease; FEV1, forced expiratory volume in one second; FVC, forced vital capacity; DLco, diffusing capacity for carbon monoxide; Kco, carbon monoxide transfer coefficient; TLC, total lung capacity; CPI, composite physiologic index; ILD, interstitial lung disease; GGO, ground glass opacity; PVV, pulmonary vessel volume; TxBx, traction bronchiectasis; PA, pulmonary artery; AAo, ascending aorta; RVSP, right ventricular systolic pressure. Table S4. P values demonstrating differences between automated stratified groups calculated using one-way ANOVA with Bonferroni correction for continuous variables and t-test with Bonferroni correction for categorical variables. ILD, interstitial lung disease; PA, pulmonary artery; Ao, ascending aorta; HC, honeycombing; DLco, diffusing capacity for carbon monoxide; Kco, carbon monoxide transfer coefficient; CPI, composite physiologic index; RVSP, right ventricular systolic pressure. * not significant. Figure S1. CONSORT diagram illustrating the selection of patients for the final study population. ILD, interstitial lung disease; CTD, connective tissue disease; IPAF, interstitial pneumonia with autoimmune features; LCH, Langerhans cell histiocytosis; LAM, lymphangioleiomyomatosis; CT, computed tomography. (DOCX 67 kb

Mortality prediction in idiopathic pulmonary fibrosis: evaluation of computer-based CT analysis with conventional severity measures

Computer-based computed tomography (CT) analysis can provide objective quantitation of disease in idiopathic pulmonary fibrosis (IPF). A computer algorithm, CALIPER, was compared with conventional CT and pulmonary function measures of disease severity for mortality prediction.CT and pulmonary function variables (forced expiratory volume in 1 s, forced vital capacity, diffusion capacity of the lung for carbon monoxide, transfer coefficient of the lung for carbon monoxide and composite physiologic index (CPI)) of 283 consecutive patients with a multidisciplinary diagnosis of IPF were evaluated against mortality. Visual and CALIPER CT features included total extent of interstitial lung disease, honeycombing, reticular pattern, ground glass opacities and emphysema. In addition, CALIPER scored pulmonary vessel volume (PVV) while traction bronchiectasis and consolidation were only scored visually. A combination of mortality predictors was compared with the Gender, Age, Physiology model.On univariate analyses, all visual and CALIPER-derived interstitial features and functional indices were predictive of mortality to a 0.01 level of significance. On multivariate analysis, visual CT parameters were discarded. Independent predictors of mortality were CPI (hazard ratio (95% CI) 1.05 (1.02-1.07), p<0.001) and two CALIPER parameters: PVV (1.23 (1.08-1.40), p=0.001) and honeycombing (1.18 (1.06-1.32), p=0.002). A three-group staging system derived from this model was powerfully predictive of mortality (2.23 (1.85-2.69), p<0.0001).CALIPER-derived parameters, in particular PVV, are more accurate prognostically than traditional visual CT scores. Quantitative tools such as CALIPER have the potential to improve staging systems in IPF

Serial automated quantitative CT analysis in idiopathic pulmonary fibrosis: functional correlations and comparison with changes in visual CT scores

OBJECTIVES: To determine whether computer-based CT quantitation of change can improve on visual change quantification of parenchymal features in IPF. METHODS: Sixty-six IPF patients with serial CT imaging (6-24 months apart) had CT features scored visually and with a computer software tool: ground glass opacity, reticulation and honeycombing (all three variables summed as interstitial lung disease extent [ILD]) and emphysema. Pulmonary vessel volume (PVV) was estimated by computer only. Relationships between changes in CT features and forced vital capacity (FVC) were examined using univariate and multivariate linear regression analyses. RESULTS: On univariate analysis, changes in computer variables demonstrated stronger linkages to FVC change than changes in visual scores (CALIPER ILD:R2=0.53, p<0.0001; Visual ILD:R2=0.16, p=0.001). PVV increase correlated most strongly with relative FVC change (R2=0.57). When PVV constituents (vessel size and location) were examined, an increase in middle zone vessels linked most strongly to FVC decline (R2=0.57) and was independent of baseline disease severity (characterised by CT fibrosis extent, FVC, or DLco). CONCLUSIONS: An increase in PVV, specifically an increase in middle zone lung vessels, was the strongest CT determinant of FVC decline in IPF and was independent of baseline disease severity. KEY POINTS: • Computer analysis improves on visual CT scoring in evaluating deterioration on CT • Increasing pulmonary vessel volume is the strongest CT predictor of functional deterioration • Increasing pulmonary vessel volume predicts functional decline independent of baseline disease severity

Evaluation of visual and computer-based CT analysis for the identification of functional patterns of obstruction and restriction in hypersensitivity pneumonitis

BACKGROUND AND OBJECTIVE: To determine whether computer-based quantification (CALIPER software) is superior to visual computed tomography (CT) scoring in the identification of CT patterns indicative of restrictive and obstructive functional indices in hypersensitivity pneumonitis (HP). METHODS: A total of 135 consecutive HP patients had CT parenchymal patterns evaluated quantitatively by both visual scoring and CALIPER. Results were evaluated against: forced vital capacity (FVC), total lung capacity (TLC), diffusing capacity for carbon monoxide (DLCO ) and a composite physiological index (CPI) to identify which CT scoring method better correlated with functional indices. RESULTS: CALIPER-derived scores of total interstitial lung disease extent correlated more strongly than visual scores: FVC (CALIPER R = 0.73, visual R = 0.51); DLCO (CALIPER R = 0.61, visual R = 0.48); and CPI (CALIPER R = 0·70, visual R = 0·55). The CT variable that correlated most strongly with restrictive functional indices was CALIPER pulmonary vessel volume (PVV): FVC R = 0.75, DLCO R = 0.68 and CPI R = 0.76. Ground-glass opacity quantified by CALIPER alone demonstrated strong associations with restrictive functional indices: CALIPER FVC R = 0.65; DLCO R = 0.59; CPI R = 0.64; and visual = not significant. Decreased attenuation lung quantified by CALIPER was a better morphological measure of obstructive lung disease than equivalent visual scores as judged by relationships with TLC (CALIPER R = 0.63 and visual R = 0.12). All results were maintained on multivariate analysis. CONCLUSION: CALIPER improved on visual scoring in HP as judged by restrictive and obstructive functional correlations. Decreased attenuation regions of the lung quantified by CALIPER demonstrated better linkages to obstructive lung physiology than visually quantified CT scores. A novel CALIPER variable, the PVV, demonstrated the strongest linkages with restrictive functional indices and could represent a new automated index of disease severity in HP

Automated Quantitative Computed Tomography Versus Visual Computed Tomography Scoring in Idiopathic Pulmonary Fibrosis: Validation Against Pulmonary Function

PURPOSE: The aim of the study was to determine whether a novel computed tomography (CT) postprocessing software technique (CALIPER) is superior to visual CT scoring as judged by functional correlations in idiopathic pulmonary fibrosis (IPF). MATERIALS AND METHODS: A total of 283 consecutive patients with IPF had CT parenchymal patterns evaluated quantitatively with CALIPER and by visual scoring. These 2 techniques were evaluated against: forced expiratory volume in 1 second (FEV1), forced vital capacity (FVC), diffusing capacity for carbon monoxide (DLco), carbon monoxide transfer coefficient (Kco), and a composite physiological index (CPI), with regard to extent of interstitial lung disease (ILD), extent of emphysema, and pulmonary vascular abnormalities. RESULTS: CALIPER-derived estimates of ILD extent demonstrated stronger univariate correlations than visual scores for most pulmonary function tests (PFTs): (FEV1: CALIPER R=0.29, visual R=0.18; FVC: CALIPER R=0.41, visual R=0.27; DLco: CALIPER R=0.31, visual R=0.35; CPI: CALIPER R=0.48, visual R=0.44). Correlations between CT measures of emphysema extent and PFTs were weak and did not differ significantly between CALIPER and visual scoring. Intriguingly, the pulmonary vessel volume provided similar correlations to total ILD extent scored by CALIPER for FVC, DLco, and CPI (FVC: R=0.45; DLco: R=0.34; CPI: R=0.53). CONCLUSIONS: CALIPER was superior to visual scoring as validated by functional correlations with PFTs. The pulmonary vessel volume, a novel CALIPER CT parameter with no visual scoring equivalent, has the potential to be a CT feature in the assessment of patients with IPF and requires further exploration

Functional and prognostic effects when emphysema complicates idiopathic pulmonary fibrosis

This study aimed to investigate whether the combination of fibrosis and emphysema has a greater effect than the sum of its parts on functional indices and outcome in idiopathic pulmonary fibrosis (IPF), using visual and computer-based (CALIPER) computed tomography (CT) analysis.Consecutive patients (n=272) with a multidisciplinary IPF diagnosis had the extent of interstitial lung disease (ILD) scored visually and by CALIPER. Visually scored emphysema was subcategorised as isolated or mixed with fibrotic lung. The CT scores were evaluated against functional indices forced vital capacity (FVC), diffusing capacity of the lungs for carbon monoxide (DLCO), transfer coefficient of the lung for carbon monoxide (KCO), composite physiologic index (CPI)) and mortality.The presence and extent of emphysema had no impact on survival. Results were maintained following correction for age, gender, smoking status and baseline severity using DLCO, and combined visual emphysema and ILD extent. Visual emphysema quantitation indicated that relative preservation of lung volumes (FVC) resulted from tractionally dilated airways within fibrotic lung, ventilating areas of admixed emphysema (p<0.0001), with no independent effect on FVC from isolated emphysema. Conversely, only isolated emphysema (p<0.0001) reduced gas transfer (DLCO).There is no prognostic impact of emphysema in IPF, beyond that explained by the additive extents of both fibrosis and emphysema. With respect to the location of pulmonary fibrosis, emphysema distribution determines the functional effects of emphysema

Automated computer-based CT stratification as a predictor of outcome in hypersensitivity pneumonitis

BACKGROUND: Hypersensitivity pneumonitis (HP) has a variable clinical course. Modelling of quantitative CALIPER-derived CT data can identify distinct disease phenotypes. Mortality prediction using CALIPER analysis was compared to the interstitial lung disease gender, age, physiology (ILD-GAP) outcome model. METHODS: CALIPER CT analysis of parenchymal patterns in 98 consecutive HP patients was compared to visual CT scoring by two radiologists. Functional indices including forced vital capacity (FVC) and diffusion capacity for carbon monoxide (DLco) in univariate and multivariate Cox mortality models. Automated stratification of CALIPER scores was evaluated against outcome models. RESULTS: Univariate predictors of mortality included visual and CALIPER CT fibrotic patterns, and all functional indices. Multivariate analyses identified only two independent predictors of mortality: CALIPER reticular pattern (p = 0.001) and DLco (p < 0.0001). Automated stratification distinguished three distinct HP groups (log-rank test p < 0.0001). Substitution of automated stratified groups for FVC and DLco in the ILD-GAP model demonstrated no loss of model strength (C-Index = 0.73 for both models). Model strength improved when automated stratified groups were combined with the ILD-GAP model (C-Index = 0.77). CONCLUSIONS: CALIPER-derived variables are the strongest CT predictors of mortality in HP. Automated CT stratification is equivalent to functional indices in the ILD-GAP model for predicting outcome in HP. KEY POINTS: • Computer CT analysis better predicts mortality than visual CT analysis in HP. • Quantitative CT analysis is equivalent to functional indices for prognostication in HP. • Prognostication using the ILD-GAP model improves when combined with quantitative CT analysis

Reviews in Radiology Informatics: Establishing a Core Informatics Curriculum

The advent of digital imaging and information management within the radiology department has prompted the growth of a new radiology subspecialty: Radiology Informatics. With appropriate training, radiologists can become leaders in Medical Informatics and guide the growth of this technology throughout the medical enterprise. Radiology Informatics fellowships, as well as radiology residency programs, provide inconsistent exposure to all the elements of this subspecialty, in part because of the lack of a common curriculum. The Society for Computer Applications in Radiology (SCAR) has developed a curriculum intended to guide training in Radiology Informatics. This article is the first in a series presented by SCAR and the Journal of Digital Imaging, titled “Reviews in Radiology Informatics.” The series is designed to sample from each of the major components in the Radiology Informatics Curriculum, to spark further interest in the field and provide content for informatics education

Recombinant human pentraxin-2 therapy in patients with idiopathic pulmonary fibrosis: safety, pharmacokinetics and exploratory efficacy

Abnormal fibrogenic repair response upon alveolar injury is believed to play an important role in the pathogenesis of idiopathic pulmonary fibrosis (IPF). PRM-151 (recombinant human pentraxin-2, also known as serum amyloid P), has been shown to reduce fibrosis in preclinical lung fibrosis models, and was well tolerated with a favourable pharmacokinetic profile in an earlier single-dose phase I study. A randomised, double-blind, placebo-controlled, multiple ascending dose trial was performed to assess the tolerability and pharmacokinetic and pharmacodynamic characteristics of multiple doses of PRM-151 in IPF patients. Subjects in three successive cohorts (1, 5, or 10 mg.kg-(1) versus placebo) received intravenous study drug on days 1, 3, 5, 8 and 15, and were followed-up to day 57. PRM-151 was well tolerated at all dose levels, with no serious adverse reactions. Administration of PRM-151 resulted in two-to eight-fold dose-dependent increases in circulating pentraxin-2 levels. Forced vital capacity and 6-min walk test showed trends towards improvement in the combined PRM-151 dose groups. On high-resolution computed tomography scans, stable or improved lung volume unoccupied by interstitial lung abnormality was noted in some PRM-151 subjects compared to placebo subjects on day 57. The efficacy of PRM-151 in IPF remains to be investigated in dedicated future trials