Solid Deuterium-Tritium Surface Roughness In A Beryllium Inertial Confinement Fusion Shell

Solid deuterium-tritium (D-T) fuel layers for inertial confinement fusion experiments were formed inside of a 2 mm diameter beryllium shell and were characterized using phase-contrast enhanced x-ray imaging. The solid D-T surface roughness is found to be 0.4 {micro}m for modes 7-128 at 1.5 K below the melting temperature. The layer roughness is found to increase with decreasing temperature, in agreement with previous visible light characterization studies. However, phase-contrast enhanced x-ray imaging provides a more robust surface roughness measurement than visible light methods. The new x-ray imaging results demonstrate clearly that the surface roughness decreases with time for solid D-T layers held at 1.5 K below the melting temperature

Pulsed Laser-Based X-Ray Sources for Rapid-Cool DT Layer Characterization

Ignition targets for the National Ignition Facility (NIF) will contain a cryogenically cooled {approx} 75 {micro}m-thick deuterium/tritium (DT) ice layer surrounded by a {approx} 150 {micro}m-thick beryllium (Be) shell [1]. Ignition target design optimization depends sensitively on the achievable inner surface quality of the ice layer and on the pressure of the DT gas inside the ice, which is determined by the temperature of the ice. The inner ice layer surface is smoothest at temperatures just below the DT ice/liquid/gas triple point (3T), but current ignition target designs require central gas pressures of 0.3 mg/cm3, corresponding to an ice layer temperature 1.5 K below the triple point (3T-1.5). At these lower temperatures, the ice layer quality degrades due to the formation of cracks and other features

Fielding the NIF Cryogenic Ignition Target

The United States Department of Energy has embarked on a campaign to conduct credible fusion ignition experiments on the National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory in 2010. The target assembly specified for this campaign requires the formation of a deuterium/tritium (DT) fuel ice layer on the inside of a 2 millimeter diameter capsule positioned at the center of a 9 millimeter long by 5 millimeter diameter cylinder, called a hohlraum. The ice layer requires micrometer level accuracy and must be formed and maintained at temperatures below 19 K. At NIF shot time, the target must be positioned at the center of the NIF 10 meter diameter target chamber, aligned to the laser beam lines and held stable to less than 7 micrometers rms. We have completed the final design and are integrating the systems necessary to create, characterize and field the cryogenic target for ignition experiments. These designs, with emphasis on the challenges of fielding a precision cryogenic positioning system will be presented

High Brightness, Laser-Driven X-ray Source for Nanoscale Metrology and Femtosecond Dynamics

This project developed and demonstrated a new, bright, ultrafast x-ray source based upon laser-driven K-alpha generation, which can produce an x-ray flux 10 to 100 times greater than current microfocus x-ray tubes. The short-pulse (sub-picosecond) duration of this x-ray source also makes it ideal for observing time-resolved dynamics of atomic motion in solids and thin films

Increased ion temperature and neutron yield observed in magnetized indirectly driven D_{2}-filled capsule implosions on the national ignition facility

The application of an external 26 Tesla axial magnetic field to a D_{2} gas-filled capsule indirectly driven on the National Ignition Facility is observed to increase the ion temperature by 40% and the neutron yield by a factor of 3.2 in a hot spot with areal density and temperature approaching what is required for fusion ignition [1]. The improvements are determined from energy spectral measurements of the 2.45 MeV neutrons from the D(d,n)^{3}He reaction, and the compressed central core B field is estimated to be ∼4.9  kT using the 14.1 MeV secondary neutrons from the D(T,n)^{4}He reactions. The experiments use a 30 kV pulsed-power system to deliver a ∼3  μs current pulse to a solenoidal coil wrapped around a novel high-electrical-resistivity AuTa_{4} hohlraum. Radiation magnetohydrodynamic simulations are consistent with the experiment

National Ignition Facility Target Design and Fabrication

The current capsule target design for the first ignition experiments at the NIF Facility beginning in 2009 will be a copper-doped beryllium capsule, roughly 2 mm in diameter with 160-{micro}m walls. The capsule will have a 75-{micro}m layer of solid DT on the inside surface, and the capsule will driven with x-rays generated from a gold/uranium cocktail hohlraum. The design specifications are extremely rigorous, particularly with respect to interfaces, which must be very smooth to inhibit Rayleigh-Taylor instability growth. This paper outlines the current design, and focuses on the challenges and advances in capsule fabrication and characterization; hohlraum fabrication, and D-T layering and characterization

Ignition Target Fabrication and Fielding for the National Ignition Facility

Continued advances in the design of ignition targets have stimulating new development paths for target fabrication, with potentially important simplifications for fielding cryogenic ignition targets for the National Ignition Facility. Including graded dopants in ablators as well as optimizing capsule and fuel layer dimensions increase implosion stability. This has led to developments of micron-scale fill tubes to fill and field the targets. Rapid progress has been made in development of the graded dopant layers in capsules as well as their characterization, in fabrication methods for micro-fill-tubes, and in fuel fill control with these fill tubes. Phase-contrast x-ray radiography has allowed characterization of fuel layers in beryllium targets. This target development program includes participation from General Atomics, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory

Thin Shell, High Velocity Inertial Confinement Fusion Implosions on the National Ignition Facility

Experiments have recently been conducted at the National Ignition Facility utilizing inertial confinement fusion capsule ablators that are 175 and 165  μm in thickness, 10% and 15% thinner, respectively, than the nominal thickness capsule used throughout the high foot and most of the National Ignition Campaign. These three-shock, high-adiabat, high-foot implosions have demonstrated good performance, with higher velocity and better symmetry control at lower laser powers and energies than their nominal thickness ablator counterparts. Little to no hydrodynamic mix into the DT hot spot has been observed despite the higher velocities and reduced depth for possible instability feedthrough. Early results have shown good repeatability, with up to 1/2 the neutron yield coming from α-particle self-heating