Uncovering selective excitations using the resonant profile of indirect inelastic x-ray scattering in correlated materials: Observing two-magnon scattering and relation to the dynamical structure factor

Resonant inelastic x-ray scattering (RIXS) is a spectroscopic technique which has been widely used to study various elementary excitations in correlated and other condensed matter systems. For strongly correlated materials, besides boosting the overall signal the dependence of the resonant profile on incident photon energy is still not fully understood. Previous endeavors in connecting indirect RIXS, such as Cu K-edge for example where scattering takes place only via the core-hole created as an intermediate state, with the charge dynamical structure factor S(q,\omega) neglected complicated dependence on the intermediate state configuration. To resolve this issue, we performed an exact diagonalization study of the RIXS cross-section using the single-band Hubbard model by fully addressing the intermediate state contribution. Our results are relevant to indirect RIXS in correlated materials, such as high Tc cuprates. We demonstrate that RIXS spectra can be reduced to S(q,\omega) when there is no screening channel for the core-hole potential in the intermediate state. We also show that two-magnon excitations are highlighted at the resonant photon energy when the core-hole potential in the corresponding intermediate state is poorly screened. Our results demonstrate that different elementary excitations can be emphasized at different intermediate states, such that selecting the exact incident energy is critical when trying to capture a particular elementary excitation.Comment: 11 pages, 3 figure

Orbital and spin physics in LiNiO2 and NaNiO2

We derive a spin-orbital Hamiltonian for a triangular lattice of e_g orbital degenerate (Ni^{3+}) transition metal ions interacting via 90 degree superexchange involving (O^{2-}) anions, taking into account the on-site Coulomb interactions on both the anions and the transition metal ions. The derived interactions in the spin-orbital model are strongly frustrated, with the strongest orbital interactions selecting different orbitals for pairs of Ni ions along the three different lattice directions. In the orbital ordered phase, favoured in mean field theory, the spin-orbital interaction can play an important role by breaking the U(1) symmetry generated by the much stronger orbital interaction and restoring the threefold symmetry of the lattice. As a result the effective magnetic exchange is non-uniform and includes both ferromagnetic and antiferromagnetic spin interactions. Since ferromagnetic interactions still dominate, this offers yet insufficient explanation for the absence of magnetic order and the low-temperature behaviour of the magnetic susceptibility of stoichiometric LiNiO_2. The scenario proposed to explain the observed difference in the physical properties of LiNiO_2 and NaNiO_2 includes small covalency of Ni-O-Li-O-Ni bonds inducing weaker interplane superexchange in LiNiO_2, insufficient to stabilize orbital long-range order in the presence of stronger intraplane competition between superexchange and Jahn-Teller coupling.Comment: 33 pages, 12 postscript figures, uses iopams.sty . This article features in New Journal of Physics as part of a Focus Issue on Orbital Physics - all contributions may be freely accessed at (http://stacks.iop.org/1367-2630/6/i=1/a=E05). The published version of this article may be found at http://stacks.iop.org/1367-2630/7/12

The Quadrupole Magnets for the LHC Injection Transfer Lines

Two injection transfer lines, each about 2.8 km long, are being built to transfer protons at 450 GeV from the Super Proton Synchrotron (SPS) to the Large Hadron Collider (LHC). A total of 180 quadrupole magnets are required; they are produced in the framework of the contribution of the Russian Federation to the construction of the LHC. The classical quadrupoles, built from laminated steel cores and copper coils, have a core length of 1.4 m, an inscribed diameter of 32 mm and a strength of 53.5 T/m at a current of 530 A. The total weight of one magnet is 1.1 ton. For obtaining the required field quality at the small inscribed diameter, great care in the stamping of the laminations and the assembly of quadrants is necessary. Special instruments have been developed to measure, with a precision of some mm, the variations of the pole gaps over the full length of the magnet and correlate them to the obtained field distribution. The design has been developed in a collaboration between BINP and CERN. Fabrication and the magnetic measurements are done at BINP and should be finished at the end of the year 2000

Requirements for the LHC collimation system

The LHC requires efficient collimation during all phases of the beam cycle. Collimation plays important roles in prevention of magnet quenches from regular beam diffusion, detection of abnormal beam loss and subsequent beam abort, radiation protection, and passive protection of the superconducting magnets in case of failures. The different roles of collimation and the high beam power in the LHC impose many challenges for the design of the collimation system. In particular, the collimators must be able to withstand the expected particle losses. The requirements for the LHC collimation system are presented

Impact Forecasting to Support Emergency Management of Natural Hazards

Forecasting and early warning systems are important investments to protect lives, properties, and livelihood. While early warning systems are frequently used to predict the magnitude, location, and timing of potentially damaging events, these systems rarely provide impact estimates, such as the expected amount and distribution of physical damage, human consequences, disruption of services, or financial loss. Complementing early warning systems with impact forecasts has a twofold advantage: It would provide decision makers with richer information to take informed decisions about emergency measures and focus the attention of different disciplines on a common target. This would allow capitalizing on synergies between different disciplines and boosting the development of multihazard early warning systems. This review discusses the state of the art in impact forecasting for a wide range of natural hazards. We outline the added value of impact-based warnings compared to hazard forecasting for the emergency phase, indicate challenges and pitfalls, and synthesize the review results across hazard types most relevant for Europe

The trigger system of the NOMAD experiment

The NOMAD trigger system is described in the present paper. It is made up of a largearea plastic scintillator veto system, two trigger scintillator planes inside a 0.4~Tmagnetic field and their associated trigger electronics. Special features of the systemconsist of the use of proximity mesh photomultipliers which allow the trigger scintillators to operate in the magnetic field, and the use of custom-built VME moduleswhich perform the trigger logic decisions, the signal synchronisation and gate generation,event counting and livetime calculations. This paper also includes a description of each of the NOMAD triggers, with their calculated and measured rates, efficiencies and livetimes

Polaron and bipolaron formation in the Hubbard-Holstein model: role of next-nearest neighbor electron hopping

The influence of next-nearest neighbor electron hopping, $t^{\prime}$, on the polaron and bipolaron formation in a square Hubbard-Holstein model is investigated within a variational approach. The results for electron-phonon and electron-electron correlation functions show that a negative value of $t^{\prime}$ induces a strong anisotropy in the lattice distortions favoring the formation of nearest neighbor intersite bipolaron. The role of $t^{\prime}$, electron-phonon and electron-electron interactions is briefly discussed in view of the formation of charged striped domains.Comment: 4 figure