Linewidths in bound state resonances for helium scattering from Si(111)-(1x1)H

Helium-3 spin-echo measurements of resonant scattering from the Si(111)–(1 × 1)H surface, in the energy range 4–14 meV, are presented. The measurements have high energy resolution yet they reveal bound state resonance features with uniformly broad linewidths. We show that exact quantum mechanical calculations of the elastic scattering, using the existing potential for the helium/Si(111)–(1 × 1)H interaction, cannot reproduce the linewidths seen in the experiment. Further calculations rule out inelastic and other mechanisms that might give rise to losses from the elastic scattering channels. We show that corrugation in the attractive part of the atom–surface potential is the most likely origin of the experimental lineshapes

An ellipsoidal mirror for focusing neutral atomic and molecular beams

Manipulation of atomic and molecular beams is essential to atom optics applications including atom lasers, atom lithography, atom interferometry and neutral atom microscopy. The manipulation of charge-neutral beams of limited polarizability, spin or excitation states remains problematic, but may be overcome by the development of novel diffractive or reflective optical elements. In this paper, we present the first experimental demonstration of atom focusing using an ellipsoidal mirror. The ellipsoidal mirror enables stigmatic off-axis focusing for the first time and we demonstrate focusing of a beam of neutral, ground-state helium atoms down to an approximately circular spot, (26.8±0.5) μm×(31.4±0.8) μm in size. The spot area is two orders of magnitude smaller than previous reflective focusing of atomic beams and is a critical milestone towards the construction of a high-intensity scanning helium microscope

Circulating Very Small Embryonic-Like Stem Cells in Cardiovascular Disease

Very small embryonic-like cells (VSELs) are a population of stem cells residing in the bone marrow (BM) and several organs, which undergo mobilization into peripheral blood (PB) following acute myocardial infarction and stroke. These cells express markers of pluripotent stem cells (PSCs), such as Oct-4, Nanog, and SSEA-1, as well as early cardiac, endothelial, and neural tissue developmental markers. VSELs can be effectively isolated from the BM, umbilical cord blood, and PB. Peripheral blood and BM-derived VSELs can be expanded in co-culture with C2C12 myoblast feeder layer and undergo differentiation into cells from all three germ layers, including cardiomyocytes and vascular endothelial cells. Isolation of VSLEs using fluorescence-activated cell sorting multiparameter live cell sorting system is dependent on gating strategy based on their small size and expression of PSC and absence of hematopoietic lineage markers. VSELs express early cardiac and endothelial lineages markers (GATA-4, Nkx2.5/Csx, VE-cadherin, and von Willebrand factor), SDF-1 chemokine receptor CXCR4, and undergo rapid mobilization in acute MI and ischemic stroke. Experiments in mice showed differentiation of BM-derived VSELs into cardiac myocytes and effectiveness of expanded and pre-differentiated VSLEs in improvement of left ventricular ejection fraction after myocardial infarction

The epochs of early-type galaxy formation as a function of environment

The aim of this paper is to set constraints of the epochs of early-type galaxy formation through the 'archaeology' of the stellar populations in local galaxies. Using our models of absorption line indices that account for variable abundance ratios, we derive the stellar population parameters of 124 early-type galaxies in high and low density environments. We find that all three parameters age, metallicity, and alpha/Fe ratio are correlated with velocity dispersion. We further find evidence for an influence of the environment on the stellar population properties. Massive early-type galaxies in low-density environments appear on average ~2 Gyrs younger and slightly more metal-rich than their counterparts in high density environments. No offsets in the alpha/Fe ratios, instead, are detected. We translate the derived ages and alpha/Fe ratios into star formation histories. We show that most star formation activity in early-type galaxies is expected to have happened between redshifts 3 and 5 in high density and between redshifts 1 and 2 in low density environments. We conclude that at least 50 per cent of the total stellar mass density must have already formed at z 1, in good agreement with observational estimates of the total stellar mass density as a function of redshift. Our results suggest that significant mass growth in the early-type galaxy population below z 1 must be restricted to less massive objects, and a significant increase of the stellar mass density between redshifts 1 and 2 should be present caused mainly by the field galaxy population. The results of this paper further imply vigorous star formation episodes in massive objects at z 2-5 and the presence of evolved ellipticals around z 1, both observationally identified as SCUBA galaxies and EROs.Comment: 20 pages, 10 figures, plus appendix, accepted by Ap

Release Properties and Electrochemical Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

The NASA Kennedy Space Center's Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion indicators, inhibitors and self-healing agents. This allows for the incorporation of autonomous corrosion control functionalities, such as corrosion detection and inhibition as well as the self-healing of mechanical damage, into coatings. This paper presents technical details on the characterization of inhibitor-containing particles and their corrosion inhibitive effects using electrochemical and mass loss methods. Three organic environmentally friendly corrosion inhibitors were encapsulated in organic microparticles that are compatible with desired coatings. The total inhibitor content and the release of one of the inhibitors from the microparticles in basic solution was measured. Particles with inhibitor contents of up 60 wt% were synthesized. Fast release, for immediate corrosion protection, as well as long-term release for continued protection, was observed. The inhibition efficacy of the inhibitors, both as the pure materials and in microparticles, on carbon steel was evaluated. Polarization curves and mass loss measurements showed that, in the case of 2MBT, its corrosion inhibition effectiveness was greater when it was delivered from microparticles

Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

The NASA Kennedy Space Center's Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion indicators, inhibitors and self-healing agents. This allows the incorporation of autonomous corrosion control functionalities, such as corrosion detection and inhibition as well as the self-healing of mechanical damage, into coatings. This paper presents technical details on the characterization of inhibitor-containing particles and their corrosion inhibitive effects using electrochemical and mass loss methods. Three organic environmentally friendly corrosion inhibitors were encapsulated in organic microparticles that are compatible with desired coatings. The release of the inhibitors from the microparticles in basic solution was studied. Fast release, for immediate corrosion protection, as well as long-term release for continued protection, was observed. The inhibition efficacy of the inhibitors, incorporated directly and in microparticles, on carbon steel was evaluated. Polarization curves and mass loss measurements showed that, in the case of 2MBT, its corrosion inhibition effectiveness was greater when it was delivered from microparticles

Porosity microstructures of a sandstone affected by a normal fault

Dans un système de failles normales de la bordure du fossé rhénan, les interactions eaux-roches de part et d’autre de ces failles peuvent contrôler les conditions des circulations fluides. L’objectif de ce travail est de caractériser les structures du réseau poreux dans la zone endommagée autour d’une de ces failles. Il est intéressant d’étudier la relation entre porosité et perméabilité dans cette zone. Des études pétrographiques et pétrophysiques, des mesures microthermométriques sur des inclusions fluides et la composition isotopique de l’oxygène ont permis de caractériser les structures de porosité des roches et notamment des ciments primaires et secondaires. Le couplage de ces approches montre qu’une faille normale peut à la fois jouer le rôle de drain et de barrière à la circulation des fluides. En fonction de la direction de circulation, la faille joue le rôle de drain en laissant remonter les fluides parallèlement au plan de faille et le rôle de barrière, en focalisant les circulations dans le toit. L’anisotropie, notamment des propriétés de transfert héritées des conditions de dépôts fluviatiles, est profondément modifiée par les transferts subits dans le matériau. Ainsi les modifications des transferts dépendent des modifications du réseau poreux : l’hétérogénéité de la structure du réseau et l’anisotropie d’orientation ou de connectivité. Ce modèle de circulation est contrôlé par une interaction entre les modifications des structures du réseau poreux et les circulations fluides, entraînant des modifications de l’anisotropie de certaines propriétés du matériau autour de la faille

A Case-Based Approach to Business Process Monitoring

International audienceThe agile workflow technology deals with flexible workflow adaptation and overriding, in case of foreseen as well as unforeseen changes and problems in the operating business environment. One key issue that an agile workflow system should address is Business Process (BP) monitoring. This consists in properly highlighting and organizing non-compliances and adaptations with respect to the default process schema. Such an activity can be the starting point for other very critical tasks, such as quality assessment and process reengineering. In this paper, we introduce an automated support to BP monitoring, which exploits the Case-based Reasoning (CBR) methodology. CBR is particularly well suited for managing exceptional situations, and has been proposed in the literature for process change reuse and workflow adaptation support. Our work extends these functionalities by retrieving traces of process execution similar to the current one, which can then be automatically clustered. Retrieval and clustering results can provide support both to end users, in the process instance execution phase, and to process engineers, in (formal) process quality evaluation and long term process schema redefinition. Our approach in practice is illustrated by means of a case study in the field of stroke management