Removal of Copper (II) from Wastewater Using Modified Carbon Nanotubes

In the present work, carbon nanotubes were prepared by Chemical Vapor Deposition (CVD) method, acetylene gas was used as a carbon source. In CVD system, a catalytic growth of CNTs is carried out by decomposition of acetylene (C2H2 ) at a temperature of 750 0C for one hour ,argon is used as an oxidation protection gas. The carbon nanotubes produced are purified to remove impurities such as metal catalyst and then functionalized by treating with HNO3. Scanning Electron Microscopy (SEM), FT-IR spectra and BET for Surface Area measurement technique were used for characterization of CNTs. CNTs with about 30 nm in diameter and with length of several microns were obtained. The effects of initial concentration of metal (ppm), pH, carbon nanotube (CNT) dosage (mg) and contact time (min) on the adsorption of Cu+2 ion were studied. The results show that the pH of aqueous solution is one of the major parameters that control the adsorption of ion at the solid-water interfaces. Maximum removal percentage of Cu+2 species is achieved at pH 8, CNT dosage of 50 mg/L and initial concentration of 50 mg/L and it is 98.39%. The constants of Langmuir and Freundlich models are obtained from fitting the adsorption equilibrium data. The correlation coefficients of Langmuir and Freundlich models are 0.75 and 1, respectively, indicating that the Freundlich model is more appropriate to describe the adsorption characteristics of Cu+2 onto CNTs

Non-Isothermal Crystallization Kinetics Model of PBT/ MWCNTs Nanocomposites

The non-isothermal crystallization kinetics and crystalline properties of nanocomposites poly butyleneterephthalate, [PBT] /multiwalled-carbon nanotubes (MWCNTs) were tested by differential scanning calorimetry (DSC). PBT/(MWCNTs) nanocomposite was prepared by ultrasonicated of MWCNTs (0.5, 1, 2, 4 wt %) in dichloromethane (DCM) and after that the powdered PBT polymer was added to the MWCNTs solution. The non-isothermal crystallization results show that increasing the MWCNTs contents, decreased the melting temperature (Tm) of PBT/(MWCNTs) nanocomposite as compared with pure PBT, while resulting in improving the degree of crystallinity. These results indicated that a little amount of MWCNTs can be evident strong nucleating agent in PBT nanocomposites. Avrami kinetics model results given a good agreement with the frequent investigation. The Kissinger method shows the MWCNTs had a well nucleation effect on the crystallization of PBT, and the enhancement activation energy (Ea) with increased the MWCNTs in PBT/ (MWCNTs) nanocomposite