The Effects of Profile Errors of Microlens Surfaces on Laser Beam Homogenization

Microlens arrays (MLAs) are key optical components in laser beam homogenization. However, due to imperfect surface profiles resulting from microfabrication, the functionalities of MLAs in beam modulation could be compromised to some extent. In order to address this issue, the effects of surface profile mismatches between ideal and fabricated MLAs on beam homogenization were analyzed. Four types of surface profile errors of MLAs were modeled theoretically and numerical simulations were conducted to quantitatively estimate the effects of these profile errors on beam homogenization. In addition, experiments were conducted to validate the simulation results, revealing that profile errors leading to optical deviations located on the apex of microlenses affected beam homogenization less than deviations located further away from it. This study can provide references for the further applications of MLAs in beam homogenization

Enhanced Single-Beam Multiple-Intensity Phase Retrieval Using Holographic Illumination

Single-beam multiple-intensity iterative phase retrieval is a high-precision and lens-free computational imaging method, which reconstructs the complex-valued distribution of the object from a volume of axially captured diffraction intensities using the post-processing algorithm. However, for the object with slowly-varying waves, the method may encounter the problem of convergence stagnation since the lack of diversity between the captured intensity patterns. In this paper, a novel technique to enhance phase retrieval using holographic illumination is proposed. One special computer-generated hologram is designed, which can generate multiple significantly different images at the required distances. The incident plane wave is firstly modulated by the hologram, and then the exit wave is used to illuminate the object. Benefitting from this holographic illumination, remarkable intensity changes in the given detector planes can be produced, which is conducive to fast and high-accuracy reconstruction. Simulation and optical experiments are performed to verify the feasibility of the proposed method

Enhanced Single-Beam Multiple-Intensity Phase Retrieval Using Holographic Illumination

Single-beam multiple-intensity iterative phase retrieval is a high-precision and lens-free computational imaging method, which reconstructs the complex-valued distribution of the object from a volume of axially captured diffraction intensities using the post-processing algorithm. However, for the object with slowly-varying waves, the method may encounter the problem of convergence stagnation since the lack of diversity between the captured intensity patterns. In this paper, a novel technique to enhance phase retrieval using holographic illumination is proposed. One special computer-generated hologram is designed, which can generate multiple significantly different images at the required distances. The incident plane wave is firstly modulated by the hologram, and then the exit wave is used to illuminate the object. Benefitting from this holographic illumination, remarkable intensity changes in the given detector planes can be produced, which is conducive to fast and high-accuracy reconstruction. Simulation and optical experiments are performed to verify the feasibility of the proposed method

Alternative Design of Binary Phase Diffractive Optical Element with Non-π Phase Difference

It was found that binary phase diffractive optical element (DOE) with non-π phase difference had higher diffraction efficiency and adjustable zero-order intensity than a 0-π one. However, existing design methods are all based on the simulated annealing algorithm and thus computationally expensive. In this paper, a simple and efficient method using the iterative Fourier transform algorithm (IFTA) is proposed. In this method, the target pattern is first modified via reducing the zero-order intensity. Then, the IFTA is adopted to design the conventional 0-π DOE. Subsequently, the phase distribution remains unchanged and the phase difference is carefully adjusted to increase the zero-order intensity so that the reconstructed pattern is consistent with the target. To verify this method, several typical DOEs for beam splitting were designed and fabricated, and the result showed that the proposed method is effective

Design and Fabrication of an Artificial Compound Eye for Multi-Spectral Imaging

The artificial compound eye (ACE) structure is a new type of miniaturized, lightweight and intelligent imaging system. This paper has proposed to design a multi-spectral ACE structure to enable the structure to achieve multi-spectral information on the basis of imaging. The sub-eyes in the compound eye structure have been designed as diffractive beam splitting lenses with the same focal length of 20 mm, but with the different designed center wavelengths of 650 nm, 532 nm, and 445 nm, respectively. The proximity exposure lithography and reactive ion etching process were used to prepare the designed multi-spectral ACE structure, and the spectral splitting and multi-spectral imaging experiments were carried out to verify the multi-spectral imaging function of the structure without axial movement. Furthermore, the structure can be designed according to actual requirements, which can be applied to covert reconnaissance, camouflage identification, gas leakage or other fields

Lensless Imaging via Blind Ptychography Modulation and Wavefront Separation

A novel lensless imaging approach based on ptychography and wavefront separation is proposed in this paper, which was characterized by rapid convergence and high-quality imaging. In this method, an amplitude modulator was inserted between the light source and the sample for light wave modulation. By laterally translating this unknown modulator to different positions, we acquired a sequence of modulated intensity images for quantitative object recovery. In addition, to effectively separate the object and modulator wavefront, a couple of diffraction patterns without modulation were recorded. Optical experiments were performed to verify the feasibility of our approach by testing a resolution plate, a phase object, and an agaricus cell

Fabrication of Random Microwell Arrays as Pseudo-Thermal Speckle Light Source

Quantum correlated imaging using the intensity fluctuations of thermal light possesses advantages of high resolution and strong anti-interference ability. The common method to produce pseudo-thermal light source is using a rotary ground glass and transmission of laser beam. In the present work, we propose a method for the fabrication of microwell arrays with randomly varied diameters, which could be used as a new structural element for pseudo-thermal speckle light source. If these are etched with random sizes then they may also have random and complex varying curvatures (diffusion limited etching) leading to random destructive interference of the coherent beam which could be a good thing. The microwell arrays, with diameters randomly varying from 5 μm to 40 μm, height varying from 200 nm to 20 μm, were fabricated by photolithography combined with acid etching. The experimental conditions are simple and can be scaled up to for large structures. The produced microwell arrays can transform the laser beam to a pseudo-thermal light source with a certain divergent angle by rational designing of mask and adjustable process parameters

Enhancing Multi-Distance Phase Retrieval via Unequal Interval Measurements

In the conventional methods of multi-distance phase retrieval, the diffraction intensity patterns are recorded at equal intervals, which can induce slow convergence or stagnation in the subsequent reconstruction process. To solve this problem, a measurement method with unequal intervals is proposed in this paper. The interval spacings between adjacent measurement planes are decreased gradually. A large gap accelerates retrieval progress, and a short span helps to recover detailed information. The proposed approach makes full use of the available measured dataset and simultaneously generates variations in diversity amplitude, which is a crucial issue for the techniques of multi-image phase retrieval. Both computational simulations and experiments are performed. The results demonstrate that this method can improve the convergence speed by 2 to 3 times and enhance the quality of reconstruction results in comparison to that of the conventional methods

Design and Fabrication of Flexible Naked-Eye 3D Display Film Element Based on Microstructure

The naked-eye three-dimensional (3D) display technology without wearing equipment is an inevitable future development trend. In this paper, the design and fabrication of a flexible naked-eye 3D display film element based on a microstructure have been proposed to achieve a high-resolution 3D display effect. The film element consists of two sets of key microstructures, namely, a microimage array (MIA) and microlens array (MLA). By establishing the basic structural model, the matching relationship between the two groups of microstructures has been studied. Based on 3D graphics software, a 3D object information acquisition model has been proposed to achieve a high-resolution MIA from different viewpoints, recording without crosstalk. In addition, lithography technology has been used to realize the fabrications of the MLA and MIA. Based on nanoimprint technology, a complete integration technology on a flexible film substrate has been formed. Finally, a flexible 3D display film element has been fabricated, which has a light weight and can be curled