Optimization of Process Parameters for the Manufacturing of Rocket Casings: A Study Using Processing Maps

Maraging steels possess ultrahigh strength combined with ductility and toughness and could be easily fabricated and heat-treated. Bulk metalworking of maraging steels is an important step in the component manufacture. To optimize the hot-working parameters (temperature and strain rate) for the ring rolling process of maraging steel used for the manufacture of rocket casings, a systematic study was conducted to characterize the hot working behavior by developing processing maps for \gamma-iron and an indigenous 250 grade maraging steel. The hot deformation behavior of binary alloys of iron with Ni, Co, and Mo, which are major constituents of maraging steel, is also studied. Results from the investigation suggest that all the materials tested exhibit a domain of dynamic recrystallization (DRX). From the instability maps, it was revealed that strain rates above $10 \hspace {2mm} s^{-1}$ are not suitable for hot working of these materials. An important result from the stress-strain behavior is that while Co strengthens \gamma-iron, Ni and Mo cause flow softening. Temperatures around 1125 °C and strain rate range between 0.001 and $0.1 \hspace {2mm} s^{-1}$ are suitable for the hot working of maraging steel in the DRX domain. Also, higher strain rates may be used in the meta-dynamic recrystallization domain above 1075 °C for high strain rate applications such as ring rolling. The micro-structural mechanisms identified from the processing maps along with grain size analyses and hot ductility measurements could be used to design hot-working schedules for maraging steel

Cross-linked Chitosan/Thermoplastic Starch Reinforced with Multiwalled Carbon Nanotubes Using Maleate Esters as Coupling Agent: Mechanical, Tribological and Thermal Characteristics

Bio-nanocomposites have been developed using cross-linked chitosan and cross-linked thermoplastic starch along with acid functionalized multiwalled carbon nanotubes (f-MWCNT). The nanocomposites developed were characterized for mechanical, wear, and thermal properties. The results revealed that the nanocomposites exhibited enhanced mechanical properties. The composites containing 3% f-MWCNT showed maximum compression strength. Tribological studies revealed that, with the addition of small amount of f-MWCNTs the slide wear loss reduced up to 25%. SEM analysis of the nanocomposites showed predominantly brittle fractured surface. Thermal analysis showed that the incorporation of f-MWCNTs has improved the thermal stability for the nanocomposites

A variant selection mechanism in the deformed and recrystallized matrix of a metastable -titanium alloy

The variant selection criteria during to phase transformations in a metastable -titanium alloy (Ti-5553) in the presence of deformation are examined. Two distinct metallurgical states in the matrix, heavily deformed and fully recrystallized, were obtained from a 90% cold-rolled alloy. The deformed and recrystallized samples were subjected to aging heat treatment for a short time to allow the precipitation of an intragranular phase. Electron backscattered diffraction was used to assess the crystallographic variant occurrence in the deformed as well as in the recrystallized grains. A discrete pole figure analysis revealed that a limited number of variants were evolved in the deformed grains while there was no variant selection in the recrystallized matrix. The results suggest that activation of {112}<111> slip systems determines a strong variant selection in the plastically deformed matrix

Temporal evolution of capped cadmium sulfide nanoparticles

Cadmium sulfide nanoparticles capped with thioglycolic acid as an organic ligand were synthesized by solution chemistry. Temporal evolution was studied by optical absorption, fluorescence, TEM, FTIR and x-ray diffraction measurements to understand the growth and stability of nanocrystals/ligand composites. The results suggest that besides being a good capping agent, thioglycolic acid also acts as an effective passivating ligand for electronically active surface states of CdS nanoparticles. Such binding quenches surface recombination and improves excitonic (band-to-band) recombination. This makes CdS nanoparticles an attractive material for certain applications wherein surfaces states are to be eliminated

Exfoliation of copper hydroxysalt in water and the conversion of the exfoliated layers to cupric and cuprous oxide nanoparticles

P-aminobenzoate- intercalated copper hydroxysalt was prepared by coprecipitation at high pH (similar to 12). As the pH was reduced to similar to 7 on washing with water, the development of partial positive charge on the amine end of the intercalated anion caused repulsion between the layers leading to delamination and colloidal dispersion of monolayers of copper hydroxysalt in water. The dispersed copper hydroxysalt monolayers were used as precursors for the synthesis of copper(I)/(II) oxide nanoparticles at room temperature. While the hydroxysalt layers yielded spindle-shaped CuO particles when left to stand, they formed hollow spherical nanoparticles of Cu(2)O when treated with an alkaline solution of ascorbic acid

Microwave assisted synthesis and UV-Vis spectroscopic studies of silver nanoparticles synthesized using vanillin as a reducing agent

The present investigation explores the adaptability of a microwave assisted route to obtain silver nanoparticles by the reduction of AgNO3 with vanillin, an environmentally benign material. Anionic surfactants such as AOT and SDS were used separately for encapsulating AgNPs and their role was compared. The UV-Visible absorption spectra present a broad SPR band consisting of two peaks suggesting the formation of silver nanoparticle with bimodal size distribution. The TEM image shows particles with spherical and hexagonal morphologies which confirms the results of UV-Vis studies. The anisotropy in the particle morphology can be attributed to the surface oxidation which in turn produces Ag@Ag2O core-shell nanostructures. Thus an intriguing feature of this system is that the obtained colloid is a mixture of AgNPs with and without Ag2O layers. Studies on the influence of pH on the stability of the synthesized nanoparticles revealed that the presence of excess Ag2O layers has a profound influence on it. Ag2O layers can be removed from AgNPs' surface by changing the solution pH to the acidic regime. The present study attests the enhanced ability of AOT in stabilizing the AgNPs in aqueous media. (C) 2011 Elsevier B.V. All rights reserved

Surface modification and paclitaxel drug delivery of folic acid modified polyethylene glycol functionalized hydroxyapatite nanoparticles

Nanoparticles are used for a number of biomedical applications. In this work we report the synthesis of folic acid (FA) modified polyethylene glycol (PEG) functionalized hydroxyapatite (HAp) nanoparticles. The anticancer drug, paclitaxel, is attached to the folic acid modified polyethylene glycol functionalized hydroxyapatite nanoparticles and the in vitro drug release is analyzed. The surface modification and functionalization is confirmed by Fourier transform infrared spectroscopy (FTIR), thermo gravimetric analysis (TGA) and UV spectroscopy. The importance of the paper is the investigation of the release behavior of paclitaxel conjugated folic acid modified polyethylene glycol functionalized hydroxyapatite nanoparticles. The results show an initial rapid release and then a sustained release. (C) 2012 Elsevier B.V. All rights reserved

Microwave-irradiation-assisted hybrid chemical approach for titanium dioxide nanoparticle synthesis: microbial and cytotoxicological evaluation

Titanium dioxide nanoparticles (TNPs) are widely used in the pharmaceutical and cosmetics industries. It is used for protection against UV exposure due to its light-scattering properties and high refractive index. Though TNPs are increasingly used, the synthesis of TNPs is tedious and time consuming; therefore, in the present study, microwave-assisted hybrid chemical approach was used for TNP synthesis. In the present study, we demonstrated that TNPs can be synthesized only in 2.5 h; however, the commonly used chemical approach using muffle furnace takes 5 h. The activity of TNP depends on the synthetic protocol; therefore, the present study also determined the effect of microwave-assisted hybrid chemical approach synthetic protocol on microbial and cytotoxicity. The results showed that TNP has the best antibacterial activity in decreasing order from Escherichia coli, Bacillus subtilis, and Staphylococcus aureus. The IC50 values of TNP for HCT116 and A549 were found to be 6.43 and 6.04 ppm, respectively. Cell death was also confirmed from trypan blue exclusion assay and membrane integrity loss was observed. Therefore, the study determines that the microwave-assisted hybrid chemical approach is time-saving; hence, this technique can be upgraded from lab scale to industrial scale via pilot plant scale. Moreover, it is necessary to find the mechanism of action at the molecular level to establish the reason for greater bacterial and cytotoxicological toxicity

Thermal co-reduction approach to vary size of silver nanoparticle: its microbial and cellular toxicology

In recent years, silver nanoparticles (AgNPs) have attracted considerable interest in the field of food, agriculture and pharmaceuticals mainly due to its antibacterial activity. AgNPs have also been reported to possess toxic behavior. The toxicological behavior of nanomaterials largely depends on its size and shape which ultimately depend on synthetic protocol. A systematic and detailed analysis for size variation of AgNP by thermal co-reduction approach and its efficacy toward microbial and cellular toxicological behavior is presented here. With the focus to explore the size-dependent toxicological variation, two different-sized NPs have been synthesized, i.e., 60 nm (Ag60) and 85 nm (Ag85). A detailed microbial toxicological evaluation has been performed by analyzing minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), diameter of inhibition zone (DIZ), growth kinetics (GrK), and death kinetics (DeK). Comparative cytotoxicological behavior was analyzed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. It has been concluded by this study that the size of AgNPs can be varied, by varying the concentration of reactants and temperature called as ``thermal co-reduction'' approach, which is one of the suitable approaches to meet the same. Also, the smaller AgNP has shown more microbial and cellular toxicity