Mechanical issues of FIREX target under cryogenic environment

A typical FIREX target is assembled with a 500 ?m diameter PS shell, a glass fill tube and a gold cone guide. Each part is glued together by an epoxy resin. To date, several assembled targets have been cooled down to cryogenic environment. However, they could not survive a cool down process and appeared to rupture around the glued boundary between the PS shell and cone guide. To reveal a crucial factor of the target destruction, its thermal stress after cool down was calculated using the ANSYS code. A two dimensional axisymmetric calculation model is composed of the PS shell and cone guide glued by an epoxy resin which is covered on by an epoxy fillet. A cool down process from 293 K to 10 K was simulated. The calculation showed that the rupture of the shell would start from the PS shell and gold cone guide boundary and the target validity depended on how the epoxy fillet could reinforce the PS shell

Magnetized Fast Isochoric Laser Heating for Efficient Creation of Ultra-High-Energy-Density States

The quest for the inertial confinement fusion (ICF) ignition is a grand challenge, as exemplified by extraordinary large laser facilities. Fast isochoric heating of a pre-compressed plasma core with a high-intensity short-pulse laser is an attractive and alternative approach to create ultra-high-energy-density states like those found in ICF ignition sparks. This avoids the ignition quench caused by the hot spark mixing with the surrounding cold fuel, which is the crucial problem of the currently pursued ignition scheme. High-intensity lasers efficiently produce relativistic electron beams (REB). A part of the REB kinetic energy is deposited in the core, and then the heated region becomes the hot spark to trigger the ignition. However, only a small portion of the REB collides with the core because of its large divergence. Here we have demonstrated enhanced laser-to-core energy coupling with the magnetized fast isochoric heating. The method employs a kilo-tesla-level magnetic field that is applied to the transport region from the REB generation point to the core which results in guiding the REB along the magnetic field lines to the core. 7.7 $\pm$ 1.3 % of the maximum coupling was achieved even with a relatively small radial area density core ($\rho R$ $\sim$ 0.1 g/cm$^2$). The guided REB transport was clearly visualized in a pre-compressed core by using Cu-$K_\alpha$ imaging technique. A simplified model coupled with the comprehensive diagnostics yields 6.2\% of the coupling that agrees fairly with the measured coupling. This model also reveals that an ignition-scale areal density core ($\rho R$ $\sim$ 0.4 g/cm$^2$) leads to much higher laser-to-core coupling ($>$ 15%), this is much higher than that achieved by the current scheme

Opacity effect on extreme ultraviolet radiation from laser-produced tin plasmas

Opacity effects on extreme ultraviolet (EUV) emission from laser-produced tin (Sn) plasma have been experimentally investigated. An absorption spectrum of a uniform Sn plasma generated by thermal x rays has been measured in the EUV range (9-19 nm wavelength) for the first time. Experimental results indicate that control of the optical depth of the laser-produced Sn plasma is essential for obtaining high conversion to 13.5 nm-wavelength EUV radiation; 1.8% of the conversion efficiency was attained with the use of 2.2 ns laser pulses.</p

Demonstration of a spherical plasma mirror for the counter-propagating kilojoule-class petawatt LFEX laser system

A counter-propagating laser-beam platform using a spherical plasma mirror was developed for the kilojoule-class petawatt LFEX laser. The temporal and spatial overlaps of the incoming and redirected beams were measured with an optical interferometer and an x-ray pinhole camera. The plasma mirror performance was evaluated by measuring fast electrons, ions, and neutrons generated in the counter-propagating laser interaction with a Cu-doped deuterated film on both sides. The reflectivity and peak intensity were estimated as ∼50% and ∼5 × 1018 W/cm2, respectively. The platform could enable studies of counter-streaming charged particles in high-energy-density plasmas for fundamental and inertial confinement fusion research.Kojima S., Abe Y., Miura E., et al. Demonstration of a spherical plasma mirror for the counter-propagating kilojoule-class petawatt LFEX laser system. Optics Express 30, 43491 (2022); https://doi.org/10.1364/oe.475945

Hot Electron Spectra in Plain, Cone and Integrated Targets for FIREX-I using Electron Spectrometer

The traditional fast ignition scheme is that a compressed core created by an imploding laser is auxiliary heated and ignited by the hot electrons (produced by a short pulse laser guided through the cone). Here, the most suitable target design for fast ignition can be searched for by comparison of the spectra between varied targets using an electron spectrometer