Multi-walled carbon nanotube physicochemical properties predict pulmonary inflammation and genotoxicity

<p>Lung deposition of multi-walled carbon nanotubes (MWCNT) induces pulmonary toxicity. Commercial MWCNT vary greatly in physicochemical properties and consequently in biological effects. To identify determinants of MWCNT-induced toxicity, we analyzed the effects of pulmonary exposure to 10 commercial MWCNT (supplied in three groups of different dimensions, with one pristine and two/three surface modified in each group). We characterized morphology, chemical composition, surface area and functionalization levels. MWCNT were deposited in lungs of female C57BL/6J mice by intratracheal instillation of 0, 6, 18 or 54 μg/mouse. Pulmonary inflammation (neutrophil influx in bronchoalveolar lavage (BAL)) and genotoxicity were determined on day 1, 28 or 92. Histopathology of the lungs was performed on day 28 and 92. All MWCNT induced similar histological changes. Lymphocytic aggregates were detected for all MWCNT on day 28 and 92. Using adjusted, multiple regression analyses, inflammation and genotoxicity were related to dose, time and physicochemical properties. The specific surface area (BET) was identified as a positive predictor of pulmonary inflammation on all post-exposure days. In addition, length significantly predicted pulmonary inflammation, whereas surface oxidation (–OH and –COOH) was predictor of lowered inflammation on day 28. BET surface area, and therefore diameter, significantly predicted genotoxicity in BAL fluid cells and lung tissue such that lower BET surface area or correspondingly larger diameter was associated with increased genotoxicity. This study provides information on possible toxicity-driving physicochemical properties of MWCNT. The results may contribute to safe-by-design manufacturing of MWCNT, thereby minimizing adverse effects.</p

Epoxy composite dusts with and without carbon nanotubes cause similar pulmonary responses, but differences in liver histology in mice following pulmonary deposition

Inorganic chemical composition given as elemental weight% measured by standardless WDXRF. The three epoxy materials were measured as solid disks (4 cm in diameter, 1 cm high). For comparison, the results for CNT powder, previously published in [25], were added to the figure. Displayed axis 99.7 – 100 %. (PPTX 71 kb

MWCNTs of different physicochemical properties cause similar inflammatory responses, but differences in transcriptional and histological markers of fibrosis in mouse lungs

Multi-walled carbon nanotubes (MWCNTs) are extensively produced and used in composite materials and electronic applications, thus increasing risk of worker and consumer exposure. MWCNTs are an inhomogeneous group of nanomaterials that come in various lengths, shapes and with different metal contaminations, which makes hazard evaluation difficult. However, several studies suggest that length plays an important role in the toxicity induced by MWCNTs. How the length influences toxicity at the molecular level is yet to be characterized. Female C57BL/6 mice were exposed by single intratracheal instillation to 18, 54 or 162 µg/mouse of a short MWCNT (NRCWE-026, 847±102 nm in length) or long MWCNT (NM-401, 4048±366 nm in length). The two MWCNTs were extensively characterized. Lung tissues were harvested 24 h, 3 d and 28 d after exposure. We employed DNA microarrays, bronchoalveolar lavage fluid analysis, comet assay and dichlorodihydrofluorescein assay in order to profile the pulmonary responses. Bioinformatics tools were then applied to compare and contrast the expression profiles and to build a length dependent property-response matrix for gene-by-gene comparison. The toxicogenomic analysis of the global mRNA changes after exposure to the short, entangled NRCWE-026 or the longer, stiffer NM-401 showed high degree of similarities. The toxicity of both MWCNTs was driven by strong inflammatory and acute phase responses, which peaked at day 3 and was observed both in bronchoalveolar lavage cell influx and in gene expression profiles. The inflammatory response was sustained at post-exposure day 28. Also, at the sub-chronic level, we identified a sub-set of 14 fibrosis related genes that were uniquely differentially regulated after exposure to NM-401. Acellular ROS production occurred almost exclusively with NRCWE-026, however the longer NM-401 induced in vivo DNA strand breaks and differential regulation of genes involved in free radical scavenging more readily than NRCWE-026. Our results indicate that the global mRNA response after exposure to MWCNTs is length independent at the acute time points, but that fibrosis may be length dependent sub-chronic end point.JRC.H.6-Digital Earth and Reference Dat

Novel Syntheses, Structures and Functions of Mesoporous Silica Materials

The field of mesoporous silica has been studied for about 20 years but it is still an area attracting a lot of attention. The use of novel templating molecules and several issues related to the synthesis and fine structural details are still poorly understood. These aspects are of special relevance to the theme of this thesis, which includes novel work on three fronts; the synthesis, characterization and applications of mesoporous materials. The work described in this thesis aims to contribute to the mesoporous field by developing novel methods of mesoporous silica synthesis without relying on surfactant micelles as the templating agent but focusing instead on the stacking arrangement of aromatic molecules such as folic acid. The novel route presented here leads to 2D hexagonal structures with p6mm symmetry possessing high mesoporosity and large surface areas. The versatility of this route at various synthesis temperatures and using hydrothermal treatments has also been investigated. A novel strategy is also proposed for the synthesis of mesocaged materials with Pm3n symmetry structures. The mechanism relies on the penetration of the neutral propylamino moiety of a co-structure directing agent into the hydrophobic core of the surfactant micelles. Beside these novel pathways, the effect of hydrothermal treatment (HT) at 100 oC on the 3D cubic Ia3d structure (AMS-6) over a long period of time was also examined, and the results show a phase transformation from a 3D cubic Ia3d to a 2D hexagonal p6mm structure and a return to the 3D cubic Ia3d structure at a later stage in the synthesis. This unexpected result is discussed. In this work, the detailed structural characterization of mesoporous materials using electron microscopy techniques is an important task. In particular, to extend previous knowledge, the fine structural details of mesocaged materials possessing Pm3n symmetry prepared with various amphiphilic surfactants under acidic and alkaline conditions has been investigated using electron crystallography and sorption studies. The results show subtle fine structural differences with materials prepared under alkaline conditions exhibiting the largest mesocage sizes. The cage and window sizes are primarily determined by the charge density of the surfactant and the thickness of the hydration layer surrounding the surfactant micelles. The relationship between the mesoporous structure and its function has been investigated by evaluating the rate of release of amphiphilic molecules, used as model molecules, from the internal pore structures of mesoporous materials with different pore geometries. In a similar study, the rate of proton diffusion from a liquid surrounding the mesoporous nanoparticles into the pore system of AMS-n was also assessed. The results show that the diffusion coefficients for the proton absorption process are higher than those for the release of the surfactant template molecules, with more complex 3D mesocaged particles showing the highest diffusion coefficients in both cases. Finally, the quantity of CO2 adsorption was measured by modifying the internal surfaces of mesocaged material with n-propylamino groups. Results show that the cage-connecting window sizes limit the surface coverage of n-propylamino groups by pore blocking and affect the volume of CO2 adsorption. In addition, at the molecular level, CO2 adsorption shows physisorption or chemisorption depending on the localized distribution of n-propylamino groups, as studied by in-situ infrared spectroscopy

Novel Syntheses, Structures and Functions of Mesoporous Silica Materials

The field of mesoporous silica has been studied for about 20 years but it is still an area attracting a lot of attention. The use of novel templating molecules and several issues related to the synthesis and fine structural details are still poorly understood. These aspects are of special relevance to the theme of this thesis, which includes novel work on three fronts; the synthesis, characterization and applications of mesoporous materials. The work described in this thesis aims to contribute to the mesoporous field by developing novel methods of mesoporous silica synthesis without relying on surfactant micelles as the templating agent but focusing instead on the stacking arrangement of aromatic molecules such as folic acid. The novel route presented here leads to 2D hexagonal structures with p6mm symmetry possessing high mesoporosity and large surface areas. The versatility of this route at various synthesis temperatures and using hydrothermal treatments has also been investigated. A novel strategy is also proposed for the synthesis of mesocaged materials with Pm3n symmetry structures. The mechanism relies on the penetration of the neutral propylamino moiety of a co-structure directing agent into the hydrophobic core of the surfactant micelles. Beside these novel pathways, the effect of hydrothermal treatment (HT) at 100 oC on the 3D cubic Ia3d structure (AMS-6) over a long period of time was also examined, and the results show a phase transformation from a 3D cubic Ia3d to a 2D hexagonal p6mm structure and a return to the 3D cubic Ia3d structure at a later stage in the synthesis. This unexpected result is discussed. In this work, the detailed structural characterization of mesoporous materials using electron microscopy techniques is an important task. In particular, to extend previous knowledge, the fine structural details of mesocaged materials possessing Pm3n symmetry prepared with various amphiphilic surfactants under acidic and alkaline conditions has been investigated using electron crystallography and sorption studies. The results show subtle fine structural differences with materials prepared under alkaline conditions exhibiting the largest mesocage sizes. The cage and window sizes are primarily determined by the charge density of the surfactant and the thickness of the hydration layer surrounding the surfactant micelles. The relationship between the mesoporous structure and its function has been investigated by evaluating the rate of release of amphiphilic molecules, used as model molecules, from the internal pore structures of mesoporous materials with different pore geometries. In a similar study, the rate of proton diffusion from a liquid surrounding the mesoporous nanoparticles into the pore system of AMS-n was also assessed. The results show that the diffusion coefficients for the proton absorption process are higher than those for the release of the surfactant template molecules, with more complex 3D mesocaged particles showing the highest diffusion coefficients in both cases. Finally, the quantity of CO2 adsorption was measured by modifying the internal surfaces of mesocaged material with n-propylamino groups. Results show that the cage-connecting window sizes limit the surface coverage of n-propylamino groups by pore blocking and affect the volume of CO2 adsorption. In addition, at the molecular level, CO2 adsorption shows physisorption or chemisorption depending on the localized distribution of n-propylamino groups, as studied by in-situ infrared spectroscopy

Self-assembly mechanism of folate-templated mesoporous silica

A method to form ordered mesoporous silica based on the use of folate supramolecular templates has been developed. Evidence based on in situ small-angle X-ray scattering (SAXS), electron microscopy, infrared spectroscopy, and in situ conductivity measurements are used to investigate the organic inorganic interactions and synthesis mechanism. The behavior of folate molecules in solution differs distinctively from that of surfactants commonly used for the preparation of ordered mesoporous silica phases, notably with the absence of a critical micellar concentration. In situ SAXS studies reveal fluctuations in X-ray scattering intensities consistent with the condensation of the silica precursor surrounding the folate template and the growth of the silica mesostructure in the initial stages. High-angle X-ray diffraction shows that the folate template is well-ordered within the pores even after a few minutes of synthesis. Direct structural data for the self-assembly of folates into chiral tetramers within the pores of mesoporous silica provide evidence for the in register stacking of folate tetramers, resulting in a chiral surface of rotated tetramers, with a rotation angle of 30 degrees. Additionally, the self-assembled folates within pores were capable of adsorbing a considerable amount of CO2 gas through the cavity space of the tetramers. The study demonstrates the validity of using a naturally occurring template to produce relevant and functional mesoporous materials.This work was supported by the Swedish Research Council (Project 2009-4716 AGB). Niklas Hedin acknowledges funding from the Swedish Energy Agency. Luis Angel Villaescusa is grateful for support from the Jose Castillejo Program of the Spanish Ministry of Sport and Education (Project JC2009-00141). The authors thank Y. Cerenius and M. Knaapila (MAX-lab Synchrotron Facitlity, Beamline 1711, Lund, Sweden) for assistance with SAXS experiments and beamline time.Atluri, R.; Iqbal, MN.; Bacsik, Z.; Hedin, N.; Villaescusa Alonso, LA.; García Bennet, AE. (2013). Self-assembly mechanism of folate-templated mesoporous silica. Langmuir. 29(38):12003-12012. https://doi.org/10.1021/la401532jS1200312012293

NANoREG framework for the safety assessment of nanomaterials

The NANoREG framework addresses the need to ease the nanomaterials safety assessment in the REACH Regulation context. It offers forward-looking strategies: Safe-by-Design, a Nanospecific Prioritisation and Risk Assessment, and Life Cycle Assessment. It is intended for scientific experts, regulatory authorities and industry.publishedVersio