Application of nanoparticles and nanomaterials in thermal ablation therapy of cancer

Cancer is one of the major health issues with increasing incidence worldwide. In spite of the existing conventional cancer treatment techniques, the cases of cancer diagnosis and death rates are rising year by year. Thus, new approaches are required to advance the traditional ways of cancer therapy. Currently, nanomedicine, employing nanoparticles and nanocomposites, offers great promise and new opportunities to increase the efficacy of cancer treatment in combination with thermal therapy. Nanomaterials can generate and specifically enhance the heating capacity at the tumor region due to optical and magnetic properties. The mentioned unique properties of nanomaterials allow inducing the heat and destroying the cancerous cells. This paper provides an overview of the utilization of nanoparticles and nanomaterials such as magnetic iron oxide nanoparticles, nanorods, nanoshells, nanocomposites, carbon nanotubes, and other nanoparticles in the thermal ablation of tumors, demonstrating their advantages over the conventional heating methods

Investigation of thermal effects of radiofrequency ablation mediated with iron oxide nanoparticles dispersed in agarose and chitosan solvents

Thermal ablation (TA) is known as an alternative therapy to surgery to treat tumors. However, TA-based therapy requires advanced approaches in order to prevent causing damage to healthy tissue around the tumor and selectively target the desired area. Nanoparticles are considered as a promising tool in biomedicine to fulfill these requirements. This study was carried out in order to analyze the effect of iron oxide nanoparticles on the temperature increment during radiofrequency ablation therapy of porcine liver. In addition, this research aimed to experimentally evaluate the impact of two solvents such as agarose and chitosan on the temperature change, when magnetic nanoparticles were dispersed in them. The iron oxide nanoparticles were synthesized by the solvothermal method demonstrating the magnetic properties by acting to the external magnetic field. To increase the local heat superparamagnetic nanoparticles (iron oxide magnetic nanoparticle (IONPs)) of the average size of 20 nm in size and the concentrations from 1 to 10 mg/mL of MNPs with a step size of 1 mg/mL were tested in 10 replicates for each concentration and solvent. Moreover, the temperature changes for dry liver, and 0 mg/mL concentration was checked for calibration and reference purposes. As a sensing system, advanced 16-FBG optical fiber sensors connected to an interrogator were employed allowing the temperature change to be monitored accurately in real time. A maximum temperature of about 142 °C was recorded by a 5 mg/mL concentration of iron oxide nanoparticles dispersed in the agarose solvent

Optical Fiber Distributed Sensing Network for Thermal Mapping in Radiofrequency Ablation Neighboring a Blood Vessel

Radiofrequency ablation (RFA) is a minimally invasive form of thermotherapy with great potential in cancer care, having the capability of selectively ablating tumoral masses with a surface area of several cm2. When performing RFA in the proximity of a blood vessel, the heating profile changes due to heat dissipation, perfusion, and impedance changes. In this work, we provide an experimental framework for the real-time evaluation of 2D thermal maps in RFA neighboring a blood vessel; the experimental setup is based on simultaneous scanning of multiple fibers in a distributed sensing network, achieving a spatial resolution of 2.5 × 4 mm2 in situ. We also demonstrate an increase of ablating potential when injecting an agarose gel in the tissue. Experimental results show that the heat-sink effect contributes to a reduction of the ablated region around 30–60% on average; however, the use of agarose significantly mitigates this effect, enlarging the ablated area by a significant amount, and ablating an even larger surface (+15%) in the absence of blood vessels

Highly Sensitive Zinc Oxide Fiber-Optic Biosensor for the Detection of CD44 Protein

Currently, significant progress is being made in the prevention, treatment and prognosis of many types of cancer, using biological markers to assess current physiological processes in the body, including risk assessment, differential diagnosis, screening, treatment determination and monitoring of disease progression. The interaction of protein coding gene CD44 with the corresponding ligands promotes the processes of invasion and migration in metastases. The study of new and rapid methods for the quantitative determination of the CD44 protein is essential for timely diagnosis and therapy. Current methods for detecting this protein use labeled assay reagents and are time consuming. In this paper, a fiber-optic biosensor with a spherical tip coated with a thin layer of zinc oxide (ZnO) with a thickness of 100 nm, deposited using a low-cost sol–gel method, is developed to measure the CD44 protein in the range from 100 aM to 100 nM. This sensor is easy to manufacture, has a good response to the protein change with detection limit of 0.8 fM, and has high sensitivity to the changes in the refractive index (RI) of the environment. In addition, this work demonstrates the possibility of achieving sensor regeneration without damage to the functionalized surface. The sensitivity of the obtained sensor was tested in relation to the concentration of the control protein, as well as without antibodies—CD44

Spatial-Division Multiplexing Approach for Simultaneous Detection of Fiber-Optic Ball Resonator Sensors: Applications for Refractometers and Biosensors

Fiber-optic ball resonators are an attractive technology for refractive index (RI) sensing and optical biosensing, as they have good sensitivity and allow for a rapid and repeatable manufacturing process. An important feature for modern biosensing devices is the multiplexing capacity, which allows for interrogating multiple sensors (potentially, with different functionalization methods) simultaneously, by a single analyzer. In this work, we report a multiplexing method for ball resonators, which is based on a spatial-division multiplexing approach. The method is validated on four ball resonator devices, experimentally evaluating both the cross-talk and the spectral shape influence of one sensor on another. We show that the multiplexing approach is highly efficient and that a sensing network with an arbitrary number of ball resonators can be designed with reasonable penalties for the sensing capabilities. Furthermore, we validate this concept in a four-sensor multiplexing configuration, for the simultaneous detection of two different cancer biomarkers across a widespread range of concentrations

PUBLISHER CORRECTION: LABEL-FREE FIBER-OPTIC SPHERICAL TIP BIOSENSOR TO ENABLE PICOMOLAR-LEVEL DETECTION OF CD44 PROTEIN

Increased level of CD44 protein in serum is observed in several cancers and is associated with tumor burden and metastasis. Current clinically used detection methods of this protein are time-consuming and use labeled reagents for analysis. Therefore exploring new label-free and fast methods for its quantification including its detection in situ is of importance. This study reports the first optical fiber biosensor for CD44 protein detection, based on a spherical fiber optic tip device. The sensor is easily fabricated from an inexpensive material (single-mode fiber widely used in telecommunication) in a fast and robust manner through a CO2 laser splicer..

LABEL-FREE FIBER-OPTIC SPHERICAL TIP BIOSENSOR TO ENABLE PICOMOLAR-LEVEL DETECTION OF CD44 PROTEIN

Increased level of CD44 protein in serum is observed in several cancers and is associated with tumor burden and metastasis. Current clinically used detection methods of this protein are time-consuming and use labeled reagents for analysis. Therefore exploring new label-free and fast methods for its quantification including its detection in situ is of importance. This study reports the first optical fiber biosensor for CD44 protein detection, based on a spherical fiber optic tip device. The sensor is easily fabricated from an inexpensive material (single-mode fiber widely used in telecommunication) in a fast and robust manner through a CO2 laser splicer. The fabricated sensor responded to refractive index change with a sensitivity of 95.76 dB/RIU. The spherical tip was further functionalized with anti-CD44 antibodies to develop a biosensor and each step of functionalization was verified by an atomic force microscope. The biosensor detected a target of interest with an achieved limit of detection of 17 pM with only minor signal change to two control proteins. Most importantly, concentrations tested in this work are very broad and are within the clinically relevant concentration range. Moreover, the configuration of the proposed biosensor allows its potential incorporation into an in situ system for quantitative detection of this biomarker in a clinical setting

Fiber-Optic Distributed Sensing Network for Thermal Mapping of Gold Nanoparticles-Mediated Radiofrequency Ablation

In this work, we report the design of an optical fiber distributed sensing network for the 2-dimensional (2D) in situ thermal mapping of advanced methods for radiofrequency thermal ablation. The sensing system is based on six high-scattering MgO-doped optical fibers, interleaved by a scattering-level spatial multiplexing approach that allows simultaneous detection of each fiber location, in a 40 × 20 mm grid (7.8 mm2 pixel size). Radiofrequency ablation (RFA) was performed on bovine phantom, using a pristine approach and methods mediated by agarose and gold nanoparticles in order to enhance the ablation properties. The 2D sensors allow the detection of spatiotemporal patterns, evaluating the heating properties and investigating the repeatability. We observe that agarose-based ablation yields the widest ablated area in the best-case scenario, while gold nanoparticles-mediated ablation provides the best trade-off between the ablated area (53.0–65.1 mm2, 61.5 mm2 mean value) and repeatability

Green-synthesized silver nanoparticle-assisted radiofrequency ablation for improved thermal treatment distribution

Thermal ablation therapy is known as an advantageous alternative to surgery allowing the treatment of multiple tumors located in hard-to-reach locations or treating patients with medical conditions that are not compatible with surgery. Appropriate heat propagation and precise control over the heat propagation is considered a weak point of thermal ablation therapy. In this work, silver nanoparticles (AgNPs) are used to improve the heat propagation properties during the thermal ablation procedure. Green-synthesized silver nanoparticles offer several attractive features, such as excellent thermal conductivity, biocompatibility, and antimicrobial activity. A distributed multiplexed fiber optic sensing system is used to monitor precisely the temperature change during nanoparticle-assisted radiofrequency ablation. An array of six MgO-based nanoparticles doped optical fibers spliced to single-mode fibers allowed us to obtain the two-dimensional thermal maps in a real time employing optical backscattering reflectometry at 2 mm resolution and 120 sensing points. The silver nanoparticles at 5, 10, and 20 mg/mL were employed to investigate their heating effects at several positions on the tissue regarding the active electrode. In addition, the pristine tissue and tissue treated with agarose solution were also tested for reference purposes. The results demonstrated that silver nanoparticles could increase the temperature during thermal therapies by propagating the heat. The highest temperature increase was obtained for 5 mg/mL silver nanoparticles introduced to the area close to the electrode with a 102% increase of the ablated area compared to the pristine tissue