Combined Magnesia, Ceria and Nickel catalyst supported over γ-Alumina Doped with Titania for Dry Reforming of Methane

This study investigated dry reforming of methane (DRM) over combined catalysts supported on γ-Al2O3 support doped with 3.0 wt. % TiO2. Physicochemical properties of all catalysts were determined by inductively coupled plasma/mass spectrometry (ICP-MS), nitrogen physisorption, X-ray diffraction, temperature programmed reduction/oxidation/desorption/pulse hydrogen chemisorption, thermogravimetric analysis, and scanning electron microscopy. Addition of CeO2 and MgO to Ni strengthened the interaction between the Ni and the support. The catalytic activity results indicate that the addition of CeO2 and MgO to Ni did not reduce carbon deposition, but improved the activity of the catalysts. Temperature programmed oxidation (TPO) revealed the formation of carbon that is mainly amorphous and small amount of graphite. The highest CH4 and CO2 conversion was found for the catalyst composed of 5.0 wt. % NiO-10.0 wt. % CeO2/3.0 wt. %TiO2-γ-Al2O3 (Ti-CAT-II), resulting in H2/CO mole ratio close to unity. The optimum reaction conditions in terms of reactant conversion and H2/CO mole ratio were achieved by varying space velocity and CO2/CH4 mole ratio

Optimizing MgO Content for Boosting g-Al 2 O 3 -Supported Ni Catalyst in Dry Reforming of Methane

The dry reforming of methane (DRM) process has attracted research interest because of its ability to mitigate the detrimental impacts of greenhouse gases such as methane (CH4) and carbon dioxide (CO2) and produce alcohols and clean fuel. In view of this importance of DRM, we disclosed the efficiency of a new nickel-based catalyst, which was promoted with magnesia (MgO) and supported over gamma-alumina (γ-Al2O3) doped with silica (SiO2), toward DRM. The synthesized catalysts were characterized by H2 temperature-programmed reduction (H2-TPR), X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Thermogravimetric analysis (TGA), and Transmission electron microscopy (TEM) techniques. The effect of MgO weight percent loading (0.0, 1.0, 2.0, and 3.0 wt. %) was examined because the catalytic performance was found to be a function of this parameter. An optimum loading of 2.0 wt. % of MgO was obtained, where the conversion of CH4 and CO2 at 800 °C were 86% and 91%, respectively, while the syngas (H2/CO) ratios relied on temperature and were in the range of 0.85 to 0.95. The TGA measurement of the best catalyst, which was operated over a 15-h reaction time, displayed negligible weight loss (<9.0 wt. %) due to carbon deposition, indicating the good resistance of our catalyst system to the deposition of carbon owing to the dopant and the modifier. TEM images showed the presence of multiwalled carbon nanotubes, confirming the TGA