21 research outputs found
Quantum supremacy using a programmable superconducting processor
The promise of quantum computers is that certain computational tasks might be executed exponentially faster on a quantum processor than on a classical processor. A fundamental challenge is to build a high-fidelity processor capable of running quantum algorithms in an exponentially large computational space. Here we report the use of a processor with programmable superconducting qubits to create quantum states on 53 qubits, corresponding to a computational state-space of dimension 2⁵³ (about 10¹⁶). Measurements from repeated experiments sample the resulting probability distribution, which we verify using classical simulations. Our Sycamore processor takes about 200 seconds to sample one instance of a quantum circuit a million times—our benchmarks currently indicate that the equivalent task for a state-of-the-art classical supercomputer would take approximately 10,000 years. This dramatic increase in speed compared to all known classical algorithms is an experimental realization of quantum supremacy for this specific computational task, heralding a much-anticipated computing paradigm
Quantum supremacy using a programmable superconducting processor
The promise of quantum computers is that certain computational tasks might be executed exponentially faster on a quantum processor than on a classical processor. A fundamental challenge is to build a high-fidelity processor capable of running quantum algorithms in an exponentially large computational space. Here we report the use of a processor with programmable superconducting qubits to create quantum states on 53 qubits, corresponding to a computational state-space of dimension 2⁵³ (about 10¹⁶). Measurements from repeated experiments sample the resulting probability distribution, which we verify using classical simulations. Our Sycamore processor takes about 200 seconds to sample one instance of a quantum circuit a million times—our benchmarks currently indicate that the equivalent task for a state-of-the-art classical supercomputer would take approximately 10,000 years. This dramatic increase in speed compared to all known classical algorithms is an experimental realization of quantum supremacy for this specific computational task, heralding a much-anticipated computing paradigm
Resolving catastrophic error bursts from cosmic rays in large arrays of superconducting qubits
Scalable quantum computing can become a reality with error correction,
provided coherent qubits can be constructed in large arrays. The key premise is
that physical errors can remain both small and sufficiently uncorrelated as
devices scale, so that logical error rates can be exponentially suppressed.
However, energetic impacts from cosmic rays and latent radioactivity violate
both of these assumptions. An impinging particle ionizes the substrate,
radiating high energy phonons that induce a burst of quasiparticles, destroying
qubit coherence throughout the device. High-energy radiation has been
identified as a source of error in pilot superconducting quantum devices, but
lacking a measurement technique able to resolve a single event in detail, the
effect on large scale algorithms and error correction in particular remains an
open question. Elucidating the physics involved requires operating large
numbers of qubits at the same rapid timescales as in error correction, exposing
the event's evolution in time and spread in space. Here, we directly observe
high-energy rays impacting a large-scale quantum processor. We introduce a
rapid space and time-multiplexed measurement method and identify large bursts
of quasiparticles that simultaneously and severely limit the energy coherence
of all qubits, causing chip-wide failure. We track the events from their
initial localised impact to high error rates across the chip. Our results
provide direct insights into the scale and dynamics of these damaging error
bursts in large-scale devices, and highlight the necessity of mitigation to
enable quantum computing to scale
Readout of a quantum processor with high dynamic range Josephson parametric amplifiers
We demonstrate a high dynamic range Josephson parametric amplifier (JPA) in
which the active nonlinear element is implemented using an array of rf-SQUIDs.
The device is matched to the 50 environment with a Klopfenstein-taper
impedance transformer and achieves a bandwidth of 250-300 MHz, with input
saturation powers up to -95 dBm at 20 dB gain. A 54-qubit Sycamore processor
was used to benchmark these devices, providing a calibration for readout power,
an estimate of amplifier added noise, and a platform for comparison against
standard impedance matched parametric amplifiers with a single dc-SQUID. We
find that the high power rf-SQUID array design has no adverse effect on system
noise, readout fidelity, or qubit dephasing, and we estimate an upper bound on
amplifier added noise at 1.6 times the quantum limit. Lastly, amplifiers with
this design show no degradation in readout fidelity due to gain compression,
which can occur in multi-tone multiplexed readout with traditional JPAs.Comment: 9 pages, 8 figure
Measurement-Induced State Transitions in a Superconducting Qubit: Within the Rotating Wave Approximation
Superconducting qubits typically use a dispersive readout scheme, where a
resonator is coupled to a qubit such that its frequency is qubit-state
dependent. Measurement is performed by driving the resonator, where the
transmitted resonator field yields information about the resonator frequency
and thus the qubit state. Ideally, we could use arbitrarily strong resonator
drives to achieve a target signal-to-noise ratio in the shortest possible time.
However, experiments have shown that when the average resonator photon number
exceeds a certain threshold, the qubit is excited out of its computational
subspace, which we refer to as a measurement-induced state transition. These
transitions degrade readout fidelity, and constitute leakage which precludes
further operation of the qubit in, for example, error correction. Here we study
these transitions using a transmon qubit by experimentally measuring their
dependence on qubit frequency, average photon number, and qubit state, in the
regime where the resonator frequency is lower than the qubit frequency. We
observe signatures of resonant transitions between levels in the coupled
qubit-resonator system that exhibit noisy behavior when measured repeatedly in
time. We provide a semi-classical model of these transitions based on the
rotating wave approximation and use it to predict the onset of state
transitions in our experiments. Our results suggest the transmon is excited to
levels near the top of its cosine potential following a state transition, where
the charge dispersion of higher transmon levels explains the observed noisy
behavior of state transitions. Moreover, occupation in these higher energy
levels poses a major challenge for fast qubit reset
Overcoming leakage in scalable quantum error correction
Leakage of quantum information out of computational states into higher energy
states represents a major challenge in the pursuit of quantum error correction
(QEC). In a QEC circuit, leakage builds over time and spreads through
multi-qubit interactions. This leads to correlated errors that degrade the
exponential suppression of logical error with scale, challenging the
feasibility of QEC as a path towards fault-tolerant quantum computation. Here,
we demonstrate the execution of a distance-3 surface code and distance-21
bit-flip code on a Sycamore quantum processor where leakage is removed from all
qubits in each cycle. This shortens the lifetime of leakage and curtails its
ability to spread and induce correlated errors. We report a ten-fold reduction
in steady-state leakage population on the data qubits encoding the logical
state and an average leakage population of less than
throughout the entire device. The leakage removal process itself efficiently
returns leakage population back to the computational basis, and adding it to a
code circuit prevents leakage from inducing correlated error across cycles,
restoring a fundamental assumption of QEC. With this demonstration that leakage
can be contained, we resolve a key challenge for practical QEC at scale.Comment: Main text: 7 pages, 5 figure
Measurement-induced entanglement and teleportation on a noisy quantum processor
Measurement has a special role in quantum theory: by collapsing the
wavefunction it can enable phenomena such as teleportation and thereby alter
the "arrow of time" that constrains unitary evolution. When integrated in
many-body dynamics, measurements can lead to emergent patterns of quantum
information in space-time that go beyond established paradigms for
characterizing phases, either in or out of equilibrium. On present-day NISQ
processors, the experimental realization of this physics is challenging due to
noise, hardware limitations, and the stochastic nature of quantum measurement.
Here we address each of these experimental challenges and investigate
measurement-induced quantum information phases on up to 70 superconducting
qubits. By leveraging the interchangeability of space and time, we use a
duality mapping, to avoid mid-circuit measurement and access different
manifestations of the underlying phases -- from entanglement scaling to
measurement-induced teleportation -- in a unified way. We obtain finite-size
signatures of a phase transition with a decoding protocol that correlates the
experimental measurement record with classical simulation data. The phases
display sharply different sensitivity to noise, which we exploit to turn an
inherent hardware limitation into a useful diagnostic. Our work demonstrates an
approach to realize measurement-induced physics at scales that are at the
limits of current NISQ processors