47 research outputs found

    One-Pot Synthesis of Hyperbranched Polyurethane-Triazoles with Controlled Structural, Molecular Weight and Hydrodynamic Characteristics

    No full text
    We report a simple and convenient approach to the one-pot synthesis of hyperbranched polyurethane-triazoles with desirable properties. This method is based on in situ generation of an AB2 + A2 + B4 azide-acetylene monomer mixture of known composition, due to quantitative reactions of urethane formation between isophorone diisocyanate (IPDI), 1,3-diazidopropanol-2 (DAPOL) (in the first stage) and propargyl alcohol (in the second stage). The obtained monomer mixture can be involved in step-growth polymerization by azide-alkyne cycloaddition without additional purification (in the third stage). The properties of the resulting polymers should depend on the composition of the monomer mixture. Therefore, first the model revealing the correlation between the monomer composition and the ratio and reactivity of the IPDI and DAPOL active groups is developed and proven. In addition, the newly developed structural kinetic model considering the substitution effect at polyaddition of the complex mixture of monomers allows the prediction of the degree of branching of the target polymer. Based on our calculations, the hyperbranched polyurethane-triazoles were synthesized under found conditions. All products were characterized by 1H NMR, FTIR, SEC, DLS, DSC, TGA and viscometry methods. It was shown that the degree of branching, molecular weight, intrinsic viscosity, and hydrodynamic radius of the final hyperbranched polymers can be specified at the first stage of one-pot synthesis. The obtained hyperbranched polyurethane-triazoles showed a degree of branching from 0.21 to 0.44 (calculated DB-0.25 and 0.45, respectively)

    Effect of Temperature on Microwave Permeability of an Air-Stable Composite Filled with Gadolinium Powder

    No full text
    A composite containing about 30% volume of micrometer-size powder of gadolinium in paraffin wax is synthesized mechanochemically. The composite permittivity and permeability are measured within the frequency range from 0.01 to 15 GHz and the temperature range from ~0 °C to 35 °C. The permittivity is constant within the measured ranges. Curie temperature of the composite is close to 15.5 °C, the phase transition is shown to take place within a temperature range about ±10 °C. The effect of temperature deviation from Curie point on reflection and transmission of a composite layer filled with Gd powder is studied experimentally and via simulation. Constitutive parameters of the composite are measured in cooled coaxial lines applying reflection-transmission and open-circuit-short-circuit techniques, and the measured low-frequency permeability is in agreement with the values retrieved from the published magnetization curves. The effect of temperature on permeability spectrum of the composite is described in terms of cluster magnetization model based on the Wiener mixing formula. The model is applied to design a microwave screen with variable attenuation; the reflectivity attenuation of 4.5 mm-thick screen increases from about −2 dB to −20 dB at 3.5 GHz if the temperature decreases from 25 °C to 5 °C

    Frequency dependence of microwave complex permeability under magnetic bias

    No full text
    Measurement of the frequency dependence of the permeability under magnetic bias is proposed as a new method for studying the microwave magnetic properties of magnetic materials. The samples under study are either rolls of thin ferromagnetic films or the composites filled with sendust particles. It is shown that the permeability measured under external magnetic bias depends on sample thickness. The correct interpretation of the measured data is possible only when sample demagnetization is accounted for. The values of the anisotropy field and the saturation magnetization of thin nitrogen doped iron films and flake-shaped sendust particles are calculated considering demagnetization of the washer-shaped sample

    Frequency dependence of microwave complex permeability under magnetic bias

    No full text
    Measurement of the frequency dependence of the permeability under magnetic bias is proposed as a new method for studying the microwave magnetic properties of magnetic materials. The samples under study are either rolls of thin ferromagnetic films or the composites filled with sendust particles. It is shown that the permeability measured under external magnetic bias depends on sample thickness. The correct interpretation of the measured data is possible only when sample demagnetization is accounted for. The values of the anisotropy field and the saturation magnetization of thin nitrogen doped iron films and flake-shaped sendust particles are calculated considering demagnetization of the washer-shaped sample

    Deposition of Thick SiO<sub>2</sub> Coatings to Carbonyl Iron Microparticles for Thermal Stability and Microwave Performance

    No full text
    Thick dielectric SiO2 shells on the surface of iron particles enhance the thermal and electrodynamic parameters of the iron. A technique to deposit thick, 500-nm, SiO2 shell to the surface of carbonyl iron (CI) particles was developed. The method consists of repeated deposition of SiO2 particles with air drying between iterations. This method allows to obtain thick dielectric shells up to 475 nm on individual CI particles. The paper shows that a thick SiO2 protective layer reduces the permittivity of the ‘Fe-SiO2—paraffin’ composite in accordance with the Maxwell Garnett medium theory. The protective shell increases the thermal stability of iron, when heated in air, by shifting the transition temperature to the higher oxide. The particle size, the thickness of the SiO2 shells, and the elemental analysis of the samples were studied using a scanning electron microscope. A coaxial waveguide and the Nicholson–Ross technique were used to measure microwave permeability and permittivity of the samples. A vibrating-sample magnetometer (VSM) was used to measure the magnetostatic data. A synchronous thermal analysis was applied to measure the thermal stability of the coated iron particles. The developed samples can be applied for electromagnetic compatibility problems, as well as the active material for various types of sensors

    Deposition of Thick SiO2 Coatings to Carbonyl Iron Microparticles for Thermal Stability and Microwave Performance

    No full text
    Thick dielectric SiO2 shells on the surface of iron particles enhance the thermal and electrodynamic parameters of the iron. A technique to deposit thick, 500-nm, SiO2 shell to the surface of carbonyl iron (CI) particles was developed. The method consists of repeated deposition of SiO2 particles with air drying between iterations. This method allows to obtain thick dielectric shells up to 475 nm on individual CI particles. The paper shows that a thick SiO2 protective layer reduces the permittivity of the &lsquo;Fe-SiO2&mdash;paraffin&rsquo; composite in accordance with the Maxwell Garnett medium theory. The protective shell increases the thermal stability of iron, when heated in air, by shifting the transition temperature to the higher oxide. The particle size, the thickness of the SiO2 shells, and the elemental analysis of the samples were studied using a scanning electron microscope. A coaxial waveguide and the Nicholson&ndash;Ross technique were used to measure microwave permeability and permittivity of the samples. A vibrating-sample magnetometer (VSM) was used to measure the magnetostatic data. A synchronous thermal analysis was applied to measure the thermal stability of the coated iron particles. The developed samples can be applied for electromagnetic compatibility problems, as well as the active material for various types of sensors

    Influence of Hydrogen Reduction Stage Conditions on the Microwave Properties of Fine Iron Powders Obtained via a Spray-Pyrolysis Technique

    No full text
    The relationship between the chemical purity of one-size particles and microwave properties in ferromagnetic materials is not clearly studied. Ferromagnetic nanostructured iron powders were synthesized from iron nitrate solution using ultrasonic spray-pyrolysis and then reduced in H2 flow at 350, 400, 450, and 500 °C. A rise in the concentration of solutions of a precursor from 10 to 20 wt. % led to an increase in mean particle size. The interrelationship was studied between chemical composition and the microwave dispersion of the powders obtained. An increase in the temperature of reduction changes the chemical composition and increases the amplitude of complex microwave permeability, which was studied using solid-state physics methods (XRD, STA, SEM, and VNA). It was found that annealing at 400 °C is the optimal treatment that allows the production of iron powders, consisting of about 90% of α-Fe phase, possessing a particle surface with low roughness and porosity, and demonstrating intense microwave absorption. Annealing at a higher temperature (500 °C) causes an even higher increase in permeability but leads to the destruction of nanostructured spheres into smaller particles due to grain growth. This destruction causes an abrupt increase in permittivity and therefore significantly reduces potential applications of the product. The insight into chemical–magnetic relationships of these materials enhances the data for design applications in magnetic field sensing

    Synthesis, Antibacterial Activity, and Cytotoxicity of Azido-Propargyloxy 1,3,5-Triazine Derivatives and Hyperbranched Polymers

    No full text
    A new method for the synthesis of azido-propargyloxy derivatives of 1,3,5-triazine has been developed utilizing the nitrosation of hydrazyno-1,3,5-triazines. New hydrazines (2-hydrazino-4,6-bis(propargyloxy)-1,3,5-triazine and 2,4-dihydrazino-6-propargyloxy-1,3,5-triazine) were synthesized and characterized via FTIR, NMR spectroscopy and elemental analysis. The hyperbranched polymers with azide (diazide monomer) and propargyloxy terminal groups were obtained via the azide-alkyne polycycloaddition reaction of diazide and monoazide AB2-type monomers. The antibacterial activity against Escherichia coli bacteria of 2,4,6-trispropargyloxy-1,3,5-triazine, 2-azido-4,6-bispropargyloxy-1,3,5-triazine, and 2,4-diazido-6-propargyloxy-1,3,5-triazine and their hyperbranched polymers was studied. Only 2,4-diazido-6-propargyloxy-1,3,5-triazine has weak antibacterial activity in comparison with ampicillin. The cytotoxicity of these compounds against M-HeLa, FetMSC, and Vero cell lines was also studied. 2,4,6-trispropargyloxy-1,3,5-triazine does not show any cytotoxic effect (IC50 ≥ 280 µM). It was shown that the presence of an azide group in the compound directly affects the cytotoxic effect. Hyperbranched polymers have a less cytotoxic effect against M-HeLa (IC50 > 100) in comparison with monomers (IC50 = 90–99 µM). This makes it possible to use these polymers as the basis for biocompatible materials in biomedical applications
    corecore