Microstructural Impact of Si and Ni During High Temperature Quenching and Partitioning Process in Medium-Mn Steels

Austenite stabilization through carbon partitioning from martensite into austenite is an essential aspect of the quenching and partitioning (Q&P) process. Substitutional alloying elements are often included in the chemical composition of Q&P steels to further control the microstructure development by inhibiting carbide precipitation (silicon) and further stabilize austenite (manganese and nickel). However, these elements can interfere in the microstructure development, especially when high partitioning temperatures are considered. In this study, the microstructural development during the Q&P process of four low-carbon, medium-manganese steels with varying contents of silicon and nickel is investigated. During partitioning at 400 °C, silicon hinders cementite precipitation in primary martensite thereby assisting carbon partitioning from martensite to austenite. During partitioning at temperatures of 500 °C and 600 °C, presence of nickel inhibits pearlite formation and promotes austenite reversion, respectively. It is observed that the stabilization of austenite is significantly enhanced through the addition of nickel by slowing down the kinetics of competitive reactions that are stimulated during the partitioning stage. Results of this study provide an understanding of the interplay among carbon, silicon and nickel during Q&P processing that will allow the development of new design strategies to tailor the microstructure of this family of alloys.This research work has been carried out in the framework of the HighQP project (Proposal Number: 709855), funded by the Research Fund for Coal and Steel (RFCS)

Furnace for in situ and simultaneous studies of nano-precipitates and phase transformations in steels by SANS and neutron diffraction

Interphase precipitation occurring during solid-state phase transformations in micro-alloyed steels is generally studied through transmission electron microscopy, atom probe tomography, and ex situ measurements of Small-Angle Neutron Scattering (SANS). The advantage of SANS over the other two characterization techniques is that SANS allows for the quantitative determination of size distribution, volume fraction, and number density of a statistically significant number of precipitates within the resulting matrix at room temperature. However, the performance of ex situ SANS measurements alone does not provide information regarding the probable correlation between interphase precipitation and phase transformations. This limitation makes it necessary to perform in situ and simultaneous studies on precipitation and phase transformations in order to gain an in-depth understanding of the nucleation and growth of precipitates in relation to the evolution of austenite decomposition at high temperatures. A furnace is, thus, designed and developed for such in situ studies in which SANS measurements can be simultaneously performed with neutron diffraction measurements during the application of high-temperature thermal treatments. The furnace is capable of carrying out thermal treatments involving fast heating and cooling as well as high operation temperatures (up to 1200 °C) for a long period of time with accurate temperature control in a protective atmosphere and in a magnetic field of up to 1.5 T. The characteristics of this furnace give the possibility of developing new research studies for better insight of the relationship between phase transformations and precipitation kinetics in steels and also in other types of materials containing nano-scale microstructural features.This work was financially supported equally by the Technology Foundation TTW, as part of the Netherlands Organization for Scientific Research (NWO), and Tata Steel Europe through the Grant No. 14307 under the Project No. S41.5.14548 in the framework of the Materials Innovation Institute (M2i) Partnership Program. The experiments performed at ISIS Neutron and Muon Source were supported by beam-time allocation from the Netherlands Organization for Scientific Research (NWO) through Project No. 721.012.102 (LARMOR) with Experiment No. RB1869024

Substitution case study: Replacing niobium by vanadium in nano-steels

The substitution of critical alloying elements in metals is a strategy to reduce the criticality of materials. Nano-steels are a novel grade of advanced highstrength steels that are suited for application in the chassis and suspension of cars and as fire-resistant steel in high-rise buildings. The high strength and ductility per unit mass make the nano-steels resource-efficient and reduce vehicle weight while maintaining crash worthiness. The excellent mechanical properties of certain nano-steels rely on the addition of small amounts (up to 0.1 wt.%) of Niobium as alloying element to the steel. Niobium is considered to be a critical raw material by the European Union due to its high economic importance as an alloying element in advanced, high-strength steel grades and due to the high supply risk related to the high degree of monopolistic production within the supply chain. This chapter describes the fundamental materials science that is needed for the substitution of the critical alloying element Niobium by Vanadium as an alloying element in nano-steels

Substitution case study: Replacing niobium by vanadium in nano-steels

The substitution of critical alloying elements in metals is a strategy to reduce the criticality of materials. Nano-steels are a novel grade of advanced highstrength steels that are suited for application in the chassis and suspension of cars and as fire-resistant steel in high-rise buildings. The high strength and ductility per unit mass make the nano-steels resource-efficient and reduce vehicle weight while maintaining crash worthiness. The excellent mechanical properties of certain nano-steels rely on the addition of small amounts (up to 0.1 wt.%) of Niobium as alloying element to the steel. Niobium is considered to be a critical raw material by the European Union due to its high economic importance as an alloying element in advanced, high-strength steel grades and due to the high supply risk related to the high degree of monopolistic production within the supply chain. This chapter describes the fundamental materials science that is needed for the substitution of the critical alloying element Niobium by Vanadium as an alloying element in nano-steels.MSE-

Unravelling dislocation networks in metals

Understanding the intricate structure of dislocations in metals is a major issue in materials science. In this paper we present a comprehensive approach for the characterisation of dislocation networks, resulting in accurate quantification and significantly increasing the insight into the dislocation structure. Dislocation networks in metals consists of dislocation segments, pinned by microstructural obstacles. In the present paper a model is introduced that describes the behaviour of these dislocation segments in the pre-yield range of a tensile test on the basis of fundamental concepts of dislocation theory. The model enables experimental quantification of the dislocation density and segment length from the tensile curve. Quantitative results are shown and discussed on the development of the dislocation network as a function of increasing degree of plastic deformation, including validation and physical interpretation of the classical Taylor equation.(OLD) MSE-3(OLD) MSE-

Quantification of dislocation structures from anelastic deformation behaviour

The pre-yield deformation behaviour (i.e., at stresses below the yield stress) of two materials, pure iron and a low-alloy steel, and its anelastic nature are analysed at room temperature, before and after the dislocation structures are varied by plastic deformation. It is shown, based on tensile experiments, that this behaviour can be explained by limited reversible glide of dislocations without essential changes in the dislocation structure. Moreover, a physically-based model that characterises the dislocation structure by two variables, the dislocation density and the effective dislocation segment length, is used to quantitatively describe this deformation behaviour. The model validity is further evaluated by comparison with dislocation densities from X-Ray Diffraction measurements.(OLD) MSE-1(OLD) MSE-

Microstructural Impact of Si and Ni During High Temperature Quenching and Partitioning Process in Medium-Mn Steels

Austenite stabilization through carbon partitioning from martensite into austenite is an essential aspect of the quenching and partitioning (Q&amp;P) process. Substitutional alloying elements are often included in the chemical composition of Q&amp;P steels to further control the microstructure development by inhibiting carbide precipitation (silicon) and further stabilize austenite (manganese and nickel). However, these elements can interfere in the microstructure development, especially when high partitioning temperatures are considered. In this study, the microstructural development during the Q&amp;P process of four low-carbon, medium-manganese steels with varying contents of silicon and nickel is investigated. During partitioning at 400 °C, silicon hinders cementite precipitation in primary martensite thereby assisting carbon partitioning from martensite to austenite. During partitioning at temperatures of 500 °C and 600 °C, presence of nickel inhibits pearlite formation and promotes austenite reversion, respectively. It is observed that the stabilization of austenite is significantly enhanced through the addition of nickel by slowing down the kinetics of competitive reactions that are stimulated during the partitioning stage. Results of this study provide an understanding of the interplay among carbon, silicon and nickel during Q&amp;P processing that will allow the development of new design strategies to tailor the microstructure of this family of alloys.</p

VC-precipitation kinetics studied by Small-Angle Neutron Scattering in nano-steels

Nanosteels are used in automotive applications to accomplish resource-efficiency while providing high-tech properties. Quantitative data and further understanding on the precipitation kinetics in Nanosteels can contribute to fulfil this goal. Small-Angle Neutron Scattering measurements are performed on a Fe-C-Mn-V steel, previously heat-treated in a dilatometer at 650°C for several holding times from seconds to 10 hours. The evolution of the precipitate volume fraction, size distribution and number density is calculated by fitting the experimental Small-Angle Neutron Scattering curves. The effect of phase transformation on precipitation kinetics is also discussed. Complementary Transmission Electron Microscopy, Scanning Electron Microscopy and Inductively Coupled Plasma Optical Emission Spectroscopy measurements are performed to support the Small-Angle Neutron Scattering data analysis.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.(OLD) MSE-1RST/Neutron and Positron Methods in Material